Hall Technologies HT-AIM-100 Manuel utilisateur
Hall Technologies May 24, 2023 Page 1 of 13
Hall Technologies • 1234 Lakeshore Dr Suite #150 Coppell, TX 75019 • halltechav.com
HT-AIM-100
4K@60Hz 4:2:0 HDBT Extender
USER MANUAL
May 24, 2023
Hall Technologies May 24, 2023 Page 2 of 13
Important Safety Instructions
1. Do not expose this apparatus to rain, moisture, dripping or
splashing and that no objects filled with liquids, such as
vases, shall be placed on the apparatus.
2. Do not install or place this unit in a bookcase, built-in
cabinet or in another confined space. Ensure the unit is well
ventilated.
3. To prevent risk of electric shock or fire hazard due to
overheating, do not obstruct the unit’s ventilation openings
with newspapers, tablecloths, curtains, and similar items.
4. Do not install near any heat sources such as radiators, heat
registers, stoves, or other apparatus (including amplifiers)
that produce heat.
5. Do not place sources of naked flames, such as lighted
candles, on the unit.
6. Clean this apparatus only with dry cloth.
7. Unplug this apparatus during lightning storms or when
unused for long periods of time.
8. Protect the power cord from being walked on or pinched
particularly at plugs.
9. Only use attachments / accessories specified by the
manufacturer
Hall Technologies May 24, 2023 Page 3 of 13
Table of Contents
Introduction ................................................................................................................................................ 4
Overview ......................................................................................................................................... 4
Features........................................................................................................................................... 4
Package Contents ........................................................................................................................................ 4
Connectors & Indicators.............................................................................................................................. 5
HT-AIM-100 Front Panel.................................................................................................................. 5
HT-AIM-100-TX Rear Panel.............................................................................................................. 6
HT-AIM-100-RX Rear Panel.............................................................................................................. 7
Product Wiring and Connection Diagram ................................................................................................... 8
Applications................................................................................................................................................. 9
Setup ......................................................................................................................................................... 10
Installation .................................................................................................................................... 10
Troubleshooting ........................................................................................................................................ 11
Specifications ............................................................................................................................................ 12
Hall Technologies May 24, 2023 Page 4 of 13
Introduction
OVERVIEW
The AIM-100 is a slimline HDBaseT extender pair that can transmit HDMI signals of up to 4K 60Hz (4:2:0
8-bit) along 100m of category cabling. CAT6 cable supports 4K 60Hz (4:2:0 8-Bit) up to 70m and 1080p
60Hz HDMI signals can also be extended up to 100m. CAT6A / 7 cabling offers increased distances of
100m for 4K 60Hz (4:2:0 8-Bit) resolutions. The AIM-100 also features bi-directional PoC, two-way IR and
RS232 pass-through.
With the built-in control pass-through, users can control the source from the display’s location or can
control the display from the source’s location. And, with their small form factor, the extenders are easy
to install in many locations.
FEATURES
Up to 4K@60Hz 4:2:0 8-bit and HDCP2.2 over a single category cable.
Using a Cat6a/7 cable, extends 4K@60Hz 4:2:0 8-bit up to 70m/230ft and 1080P up to 100m/328ft.
Over a Cat5e/6 cable, extends 4K@60Hz 4:2:0 8-bit up to 35m/115ft and 1080P up to 70m/230ft.
Bi-directional PoC (Power over Cable) with one power adapter at either end.
Supports bi-directional IR and RS232 pass-through.
Package Contents
HT-AIM-100
1x Transmitter Unit
1x Receiver Unit
1x Power Adapter (DC 18V 2A)
2x IR Emitter Cable
2x IR Receiver Cable
4x Mounting Brackets (with screws)
Hall Technologies May 24, 2023 Page 5 of 13
Connectors & Indicators
HT-AIM-100 FRONT PANEL
No.
Name
Description
1 POWER
•On: The device is powered on.
•Off: The device is powered off.
2 STATUS
•On: The device is working properly.
•Off: The device is not working properly.
3 LINK
•On: HTBaseT link is normal.
•Blinking/Off: No HDBaseT link or link error.
4 HDCP
•On: HDCP protected content is being transmitted.
•Blinking: Non-HDCP protected content is being transmitted.
•Off: No content is being transmitted.
Hall Technologies May 24, 2023 Page 6 of 13
HT-AIM-100-TX REAR PANEL
No.
Name
Description
1
POWER
DC 18V power supply. (Only one side needs to be powered.)
2
HDBT OUT
HDBaseT output, connected to the receiver input via Cat5e/6/7 cable.
3
IR IN
Connect to the IR Receiver Cable (Signal is sent to the AIM-100-RX IR OUT).
4
IR OUT
Connect to the IR Emitter Cable (Signal is received from the AIM-100-RX IN).
5
RS232
For RS-232 pass-through.
6
HDMI IN
Connect to an HDMI source.
7
ETHERNET
Connect to a LAN network.
8 MODE
Normal:
•RS-232 signals can be transmitted as pass-through signals.
•Transmitter cannot be updated.
Update:
•RS-232 signals cannot be transmitted.
•Transmitter can be updated.
Hall Technologies May 24, 2023 Page 7 of 13
HT-AIM-100-RX REAR PANEL
No.
Name
Description
1
POWER
DC 18V power supply. (Only one side needs to be powered.)
2
HDBT IN
HDBaseT input, connected to the transmitter output via Cat5e/6/7 cable.
3
IR IN
Connect to the IR Receiver Cable (Signal is sent to the AIM-100-TX IR OUT).
4
IR OUT
Connect to the IR Emitter Cable (Signal is sent to the AIM-100-TX-IR IN).
5
RS232
For RS-232 pass-through.
6
HDMI OUT
Connect to an HDMI display device.
7
ETHERNET
Connect to a LAN network.
8 MODE
Normal:
•RS-232 signals can be transmitted as pass-through signals.
•Transmitter cannot be updated.
Update:
•RS-232 signals cannot be transmitted.
•Transmitter can be updated.
Hall Technologies May 24, 2023 Page 8 of 13
Product Wiring and Connection Diagram
Hall Technologies May 24, 2023 Page 9 of 13
Applications
A laptop, or other HDMI source, is connected to the HDMI input on the HT-AIM-100-TX and then
transmitted over the category cable to the HT-AIM-100-RX, where a display, connected to the HDMI
output, shows the HDMI source. Control via RS232 or IR is also passed through the category cable for
display control.
Note: In this application the HT-AIM-100-RX is locally powered and providing power via PoC (Power over
Cable) to the HT-AIM-100-TX. Only one side needs to be powered, meaning the local power supply could
be moved to the HT-AIM-100-TX if that is more convenient for installation.
Hall Technologies May 24, 2023 Page 10 of 13
Setup
INSTALLATION
Note: Before installation, please ensure the devices are disconnected from the power source.
To install the device on a surface:
1. Secure the included L-bracket mounts to each side of the transmitter/receiver using the
included screws.
2. The bottom part of the L-bracket will slightly raise the transmitter/receiver and will create a
small gap betweensd the device and the mounting surface.
3. Using the appropriate hardware (not included), mount the bottom of the L-brackets to the
desired surface.
Table des matières
Autres manuels Hall Technologies Extenseur
Hall Technologies
Hall Technologies LYNX Series Manuel utilisateur
Hall Technologies
Hall Technologies UH18 Manuel utilisateur
Hall Technologies
Hall Technologies LYNX Series Manuel utilisateur
Hall Technologies
Hall Technologies HT-AIM-70 Manuel utilisateur
Hall Technologies
Hall Technologies HT-ASTRO2-4 Manuel utilisateur
Hall Technologies
Hall Technologies FXT-460 Manuel utilisateur
Hall Technologies
Hall Technologies U2-DR1 Manuel utilisateur
Hall Technologies
Hall Technologies GEM-EX-S Manuel utilisateur
Hall Technologies
Hall Technologies HT-Gemini Manuel utilisateur
Hall Technologies
Hall Technologies ULTRA-4K Manuel utilisateur
