H3C S9820-64H Manuel utilisateur

H3C S9820-64H Switch

Hardware Information and Specifications

New H3C Technologies Co., Ltd.

http://www.h3c.com

Document version: 6W101-20230126

No part of this manual may be reproduced or transmitted in any form or by any means without prior written

consent of New H3C Technologies Co., Ltd.

Trademarks

Except for the trademarks of New H3C Technologies Co., Ltd., any trademarks that may be mentioned in this

document are the property of their respective owners.

Notice

The information in this document is subject to change without notice. All contents in this document, including

statements, information, and recommendations, are believed to be accurate, but they are presented without

warranty of any kind, express or implied. H3C shall not be liable for technical or editorial errors or omissions

contained herein.

Environmental protection

This product has been designed to comply with the environmental protection requirements. The storage, use,

and disposal of this product must meet the applicable national laws and regulations.

Preface

H3C S9820-64H Switch Hardware Information and Specifications describes the product models,

technical specifications, removable components, ports, LEDs, and cooling system of the S9820-64H

switch.

This preface includes the following topics about the documentation:

•

Audience.

•

Conventions.

•

Documentation feedback.

Audience

This documentation is intended for:

•

Network planners.

•

Field technical support and servicing engineers.

•Network administrators working with the S9820-64H switch.

Conventions

The following information describes the conventions used in the documentation.

Command conventions

Convention

Description

Boldface Bold text represents commands and keywords that you enter literally as shown.

Italic Italic text represents arguments that you replace with actual values.

[ ] Square brackets enclose syntax choices (keywords or arguments) that are optional.

{ x | y | ... }

Braces enclose a set of required syntax choices separated by vertical bars, from which

you select one.

[ x | y | ... ]

Square brackets enclose a set of optional syntax choices separated by vertical bars,

from which you select one or none.

{ x | y | ... } *

Asterisk marked braces enclose a set of required syntax choices separated by vertical

bars, from which you select a minimum of one.

[ x | y | ... ] *

Asterisk marked square brackets enclose optional syntax choices separated by vertical

bars, from which you select one choice, multiple choices, or none.

&<1-n> The argument or keyword and argument combination before the ampersand (&) sign

can be entered 1 to n times.

# A line that starts with a pound (#) sign is comments.

GUI conventions

Convention

Description

Boldface Window names, button names, field names, and menu items are in Boldface. For

example, the New User window opens; click OK.

Multi-level menus are separated by angle brackets. For example, File > Create >

Convention

Description

Folder.

Symbols

Convention

Description

WARNING! An alert that calls attention to important information that if not understood or followed

can result in personal injury.

CAUTION:

An alert that calls attention to important information that if not understood or followed

can result in data loss, data corruption, or damage to hardware or software.

IMPORTANT:

An alert that calls attention to essential information.

NOTE:

An alert that contains additional or supplementary information.

TIP:

An alert that provides helpful information.

Network topology icons

Convention

Description

Represents a generic network device, such as a router, switch, or firewall.

Represents a routing-capable device, such as a router or Layer 3 switch.

Represents a generic switch, such as a Layer 2 or Layer 3 switch, or a router that

supports Layer 2 forwarding and other Layer 2 features.

Represents an access controller, a unified wired-WLAN module, or the access

controller engine on a unified wired-WLAN switch.

Represents an access point.

Represents a wireless terminator unit.

Represents a wireless terminator.

Represents a mesh access point.

Represents omnidirectional signals.

Represents directional signals.

Represents a security product, such as a firewall, UTM, multiservice security

gateway, or load balancing device.

Represents a security module, such as a firewall, load balancing, NetStream, SSL

VPN, IPS, or ACG module.

Examples provided in this document

Examples in this document might use devices that differ from your device in hardware model,

configuration, or software version. It is normal that the port numbers, sample output, screenshots,

and other information in the examples differ from what you have on your device.

Documentation feedback

You can e-mail your comments about product documentation to inf[email protected]om.

We appreciate your comments.

Contents

1 Product model and technical specifications ············································· 1-2

Product model ················································································································································· 1-2

Technical specifications ·································································································································· 1-2

2 Chassis views ·························································································· 2-4

3 Removable components ·········································································· 3-6

Power supplies ················································································································································ 3-6

Fan trays ························································································································································· 3-7

4 Ports and LEDs························································································ 4-8

Ports ································································································································································ 4-8

Console port ············································································································································ 4-8

Management Ethernet port ····················································································································· 4-8

FE SFP modules ····································································································································· 4-9

USB port ················································································································································ 4-10

QSFP28 port ········································································································································· 4-10

LEDs ····························································································································································· 4-14

System status LED ································································································································ 4-14

QSFP28 port LED ································································································································· 4-14

Management Ethernet port LEDs·········································································································· 4-14

Fan tray alarm LEDs ····························································································································· 4-15

5 Cooling system ······················································································ 5-15

1-2

1 Product model and technical

specifications

Product model

The H3C S9820-64H switch is a high-density intelligent 100G switch developed for data center and

high-end campus networks, providing powerful hardware forwarding capacity and abundant data

center features.

The switch provides the following ports and removable components:

•

100G QSFP28 ports.

•

Two 1G management Ethernet ports (one fiber port and one copper port).

•

Removable fan trays in redundancy mode. By using different fan trays, you can change the

airflow direction of the chassis to adapt to ventilation needs.

•

Removable power supplies in redundancy mode.

NOTE:

The

S9820-64H switch model is available with multiple product codes. To

identify the product code

of your switch

, use the product barcode on its rear panel. The S9820-64H

switch model is available

with the LS

-9820-64H or LS-9820-64H-H1 product code. If the switch is referred to as the

9820-64H switch, the information applies to the S9820-64H switch with either of the codes. If the

switch is referred to as the S

9820-64H (LS-9820-64H) or LS-9820-64H switch, the information

applies only to the S9820-64H switch with the LS-9820-64H product code.

Technical specifications

Table1-1 Technical specifications

Item S9820-64H

Product code

• LS-9820-64H

• LS-9820-64H-H1

Dimensions (H × W × D) 88.1 × 440 × 540 mm (3.47 × 17.32 × 21.26 in)

Weight ≤ 27 kg (59.52 lb) (including three fan trays and four power

supplies, excluding transceiver modules and cables)

Console port

• 1 × mini USB console port

• 1 × serial console port

Management Ethernet port

• 1 × 10/100/1000BASE-T copper port

• 1 × SFP port

USB port 1

QSFP28 port 64

Fan tray slot 3

Power supply slot 4

Minimum power consumption • Dual AC inputs: 336 W

1-3

Item S9820-64H

(For the power consumption data

collection standard, see Table1-2)

• Triple AC inputs: 349 W

• Quadruple AC inputs: 365 W

• Dual DC inputs: 329 W

• Triple DC inputs: 338 W

• Quadruple DC inputs: 352 W

Typical power consumption

(For the power consumption data

collection standard, see Table1-2)

• Dual AC inputs: 519 W

• Triple AC inputs: 523 W

• Quadruple AC inputs: 537 W

• Dual DC inputs: 508 W

• Triple DC inputs: 511 W

• Quadruple DC inputs: 521 W

Maximum power consumption

(For the power consumption data

collection standard, see Table1-2)

• Dual AC inputs: 935 W

• Triple AC inputs: 934 W

• Quadruple AC inputs: 948 W

• Dual DC inputs: 906 W

• Triple DC inputs: 904 W

• Quadruple DC inputs: 914 W

Chassis leakage current compliance

• UL60950-1

• EN60950-1

• IEC60950-1

• GB4943.1

Operating altitude –60 m to +5000 m (–196.85 ft to +16404.20 ft)

Operating temperature

0°C to 45°C (32°F to 113°F)

Note:

The allowed maximum temperature decreases by 0.33 °C

(32.59°F) as the altitude increases by 100 m (328.08 ft) from 0

m (0 ft).

Operating humidity 5% to 95%, noncondensing

Storage altitude –60 m to +5000 m (–196.85 ft to +16404.20 ft)

Storage temperature –40°C to +70°C (–40°F to +158°F)

Storage humidity 5% RH to 95% RH, noncondensing

Fire resistance compliance

• UL60950-1

• EN60950-1

• IEC60950-1

• GB4943.1

Table1-2 Power consumption data collection standard

Item Minimum power

consumption Typical power

consumption Maximum power

consumption

Configuration

• Two power supplies

• No transceiver

modules/cables

installed in ports

• Two power supplies

• Fully configured with

copper cables

• Two power supplies

• Fully configured with

transceiver modules

Load N/A 50% load 100% load

2-4

2 Chassis views

Figure2-1 S9820-64H front panel

(1) QSFP28 port

(2) QSFP28 port LED

Figure2-2 S9820-64H rear panel

(1) Serial console port

(2) Mini USB console port

(3) USB port

(4) System status LED (SYS)

(5) Fan tray 1

(6) Fan tray 2

(7) Fan tray 3

(8) Power supply 1

(9) Power supply 3

(10) Power supply 4

(11) Power supply 2

(12) Fiber management Ethernet port LED (LINK/ACT)

(13) Copper management Ethernet port LED (LINK/ACT)

(14) Copper management Ethernet port

(numbered 0)

(15) Fiber management Ethernet port (numbered 1)

The switch came with power supply slots PWR2 and PWR4 empty and power supply slots PWR1

and PWR3 installed with filler panels. You can install two to four power supplies for the switch as

needed. In Figure2-2, LSVM1AC650 AC power supplies are installed in the four power supplies

slots.

124 5 6 87 9

101112

1415 13

2-5

The switch came with the three fan tray slots empty. You must install three fan trays of the same

model for the switch. In Figure2-2, LSWM1BFANSC fan trays are installed in the three fan tray slots.

The switch supports shipping with fan trays and power supplies installed. To purchase a switch

preinstalled with fans trays and power supplies, contact marketing staff.

Figure2-3 S9820-64H left panel

(1) Primary grounding point

(2) Auxiliary grounding point

Autres manuels pour S9820-64H

Table des matières

Autres manuels H3C Changer

H3C

H3C S3100 Series Manuel utilisateur

H3C

H3C S5120-SI Series Manuel utilisateur

H3C

H3C S5830V2 series Manuel d'installation

H3C

H3C S7500X Series Manuel utilisateur

H3C

H3C S9500 Series Manuel utilisateur

H3C

H3C S3100V2-52TP Manuel utilisateur

H3C

H3C S12500G-EF Series Manuel utilisateur

H3C

H3C S5130S Series Mode d’emploi

H3C

H3C S9500 Series Manuel utilisateur

H3C

H3C S5560S-EI Series Manuel utilisateur

H3C

H3C s5800 series Manuel utilisateur

H3C

H3C CR19000-16 Manuel utilisateur

H3C

H3C S9500 Series Manuel utilisateur

H3C

H3C S9820-64H Manuel utilisateur

H3C

H3C S5850-54QS Manuel utilisateur

H3C

H3C S6820-56HF Manuel d'utilisation et d'entretien

H3C

H3C S5500-SI Series Manuel utilisateur

H3C

H3C H3C S3600 Series Manuel utilisateur

H3C

H3C S5500-SI Series Manuel utilisateur

H3C

H3C S5130S-EI series Manuel utilisateur

H3C

H3C S7500 Series Manuel utilisateur

H3C

H3C S3610 Series Manuel utilisateur

H3C

H3C S5810-50S Manuel utilisateur

H3C

H3C S9500 Series Manuel utilisateur

Manuels Changer populaires d'autres marques

URC

URC Total Control MFS-8 Manuel utilisateur

Azbil

Azbil HPQ-D11 Manuel utilisateur

Sony

Sony DFS-900M Manuel utilisateur

SICK

SICK i17S Manuel utilisateur

F&F

F&F SZR-277 Manuel utilisateur

Shure

Shure UAMS/BK Manuel utilisateur

Dräger

Dräger X-zone Switch Off Manuel utilisateur

Asco

Asco Joucomatic 349 Series Manuel utilisateur

BT Mini Hub Manuel utilisateur

D-Link

D-Link DES-1226G Manuel utilisateur

Johnson Controls

Johnson Controls FS80-C Manuel utilisateur

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Manuel utilisateur

MicroNet

MicroNet SP1200A Manuel utilisateur

Ruijie

Ruijie RG-PF2920 Series Manuel d'installation et d'exploitation

Altinex

Altinex DA1914SX Manuel utilisateur

MiLAN

MiLAN MIL-SM2401M Manuel utilisateur

RJM

RJM MASTERMIND PBC/6X Manuel utilisateur

Atlas

Atlas MMK-KVM8 Manuel utilisateur