H3C S3610 Series Instructions d'installation

H3C S3610&S5510 Series Ethernet Switches

Command Manual

Hangzhou H3C Technologies Co., Ltd.

http://www.h3c.com

Manual Version: T2-08192P-20070813-C-1.03

Product Version: Release 5301

No part of this manual may be reproduced or transmitted in any form or by any means

without prior written consent of Hangzhou H3C Technologies Co., Ltd.

Trademarks

H3C, , Aolynk, , H3Care,

, TOP G, , IRF, NetPilot,

Neocean, NeoVTL, SecPro, SecPoint, SecEngine, SecPath, Comware, Secware,

Storware, NQA, VVG, V2G, VnG, PSPT, XGbus, N-Bus, TiGem, InnoVision and

HUASAN are trademarks of Hangzhou H3C Technologies Co., Ltd.

All other trademarks that may be mentioned in this manual are the property of their

respective owners.

Notice

The information in this document is subject to change without notice. Every effort has

been made in the preparation of this document to ensure accuracy of the contents, but

all statements, information, and recommendations in this document do not constitute

the warranty of any kind, express or implied.

To obtain the latest information, please access:

http://www. h3c.com

Technical Support

customer_service@h3c.com

http://www. h3c.com

About This Manual

Related Documentation

In addition to this manual, each H3C S3610&S5510 Series Ethernet Switches

documentation set includes the following:

Manual Description

H3C S3610&S5510 Series Ethernet

Switches Operation Manual-Release

5301

It is used for assisting the users in data

configurations and typical applications.

H3C S3610 Series Ethernet Switches

Installation Manual It provides information for the system

installation.

H3C S5510 Series Ethernet Switches

Installation Manual It provides information for the system

installation.

Organization

H3C S3610&S5510 Series Ethernet Switches Command Manual Release 5301 is

organized as follows:

Part Contents

1 Login Introduces the commands used for logging into the Ethernet

switch.

2 VLAN Introduces the commands used for configuring VLAN, Voice

VLAN, and GVRP.

3 IP Addressing and

Performance Introduces the commands used for configuring IP address

and IP performance

4 QinQ-BPDU

Tunneling Introduces the commands used for configuring QinQ and

BPDU Tunneling.

5 Port Correlation

Configuration Introduces the commands used for configuring basic port

configuration and port isolation.

6 Link Aggregation Introduces the commands used for configuring manual link

aggregation static LACP link aggregation.

7 MAC Address

Table Management Introduces the commands used for configuring MAC

address forwarding table.

Part Contents

8 IP Source Guard Introduces the commands used for configuring IP Source

Guard.

9 MSTP Introduces the commands used for configuring STP and

BRDU tunnel.

10 IPv6 Introduces the commands used for configuring IPv6

application, IPv6 tunneling, and so on.

11 Routing Overview Introduces the commands used for display and debugging

IPv4/IPv6 routing protocols.

12 IPv4 Routing Introduces the commands used for configuring IPv4 routing,

static routing, RIP, OSPF, IS-IS, BGP, and route policy.

13 BFD-GR Introduces the commands used for configuring BFD and

GR.

14 IPv6 Routing Introduces the commands used for configuring IPv6 routing,

static routing, RIPng, OSPFv3, IPv6 IS-IS, and IPv6 BGP.

15 Multicast Protocol Introduces the commands used for configuring IGMP

Snooping, MLD Snooping, multicast VLAN, IGMP, PIM-DM,

PIM-SM, and MSDP.

802.1x-HABP-MAC

Authentication

Introduces the commands used for 802.1x, HABP and MAC

address authentication related configurations.

AAA-RADIUS-HWT

ACACS

Introduces the commands used for AAA, RADIUS,

HWTACACS, and the related configurations.

18 ARP Introduces the commands used for ARP and the related

configuration.

19 DHCP Introduces the commands used for DHCP and the related

configuration.

20 ACL Introduces the commands used for IPv4&IPv6-based ACL

and the related configuration.

21 QoS Introduces the commands used for QoS and the related

configuration.

22 Port Mirroring Introduces the commands used for port mirroring and the

related configuration.

23 Cluster

Management Introduces the commands used for cluster and the related

configuration.

24 UDP Helper Introduces the commands used for UDP Helper and the

related configuration.

25 SNMP-RMON Introduces the commands used for the configuration to

manage network devices through SNMP and RMON.

26 NTP Introduces the commands used for NTP and the related

configuration.

Part Contents

27 DNS Introduces the commands used for DNS and the related

configuration.

28 File System

Management Introduces the commands used for file system

management.

29 Information

Center

Introduces the commands used for the configuration to

analyze and diagnose networks using the information

center.

30 System

Maintaining and

Debugging

Introduces the commands used for daily system

maintenance and debugging.

31 NQA Introduces the commands used for NQA and the related

configuration.

32 VRRP Introduces the commands used for VRRP and the related

configuration.

33 SSH Introduces the commands used for SSH and the related

configurations.

34 MCE Introduces the commands used for MCE and the related

configurations.

35 OAM Introduces the commands used for OAM and the related

configurations.

36 DLDP Introduces the commands used for DLDP and the related

configurations.

37 RRPP Introduces the commands used for RRPP and the related

configurations.

38 SSL-HTTPS Introduces the commands used for SSL and HTTPS

configurations.

39 PKI Introduces the commands used for PKI and the related

configurations.

40 Appendix Lists all the commands described in this command manual in an

alphabetic order. The parts and pages where the commands are

described are also given.

Conventions

The manual uses the following conventions:

I. Command conventions

Convention Description

Boldface The keywords of a command line are in Boldface.

italic Command arguments are in italic.

Convention Description

[ ] Items (keywords or arguments) in square brackets [ ] are

optional.

{ x | y | ... }

Alternative items are grouped in braces and separated by

vertical bars. One is selected.

[ x | y | ... ]

Optional alternative items are grouped in square brackets

and separated by vertical bars. One or none is selected.

{ x | y | ... } *

Alternative items are grouped in braces and separated by

vertical bars. A minimum of one or a maximum of all can be

selected.

[ x | y | ... ] *

Optional alternative items are grouped in square brackets

and separated by vertical bars. Many or none can be

selected.

&<1-n> The argument(s) before the ampersand (&) sign can be

entered 1 to n times.

# A line starting with the # sign is comments.

II. GUI conventions

Convention Description

< > Button names are inside angle brackets. For example, click

<OK>.

[ ] Window names, menu items, data table and field names

are inside square brackets. For example, pop up the [New

User] window.

/ Multi-level menus are separated by forward slashes. For

example, [File/Create/Folder].

III. Symbols

Convention Description

Warning Means reader be extremely careful. Improper operation

may cause bodily injury.

Caution Means reader be careful. Improper operation may cause

data loss or damage to equipment.

Note Means a complementary description.

Autres manuels pour S3610 Series

Ce manuel convient aux modèles suivants

Autres manuels H3C Changer

H3C

H3C S9500 Series Instructions d'installation

H3C

H3C S10500 Series Manuel utilisateur

H3C

H3C S12500 Series Manuel utilisateur

H3C

H3C S5500-EI series Manuel utilisateur

H3C

H3C S9500 Series Manuel utilisateur

H3C

H3C S7508E-X Manuel d'utilisation et d'entretien

H3C

H3C S7500 Series Manuel utilisateur

H3C

H3C S9500E Series Manuel d'installation

H3C

H3C S5500-EI series Manuel utilisateur

H3C

H3C S9500 Series Instructions d'installation

H3C

H3C S7500 Series Manuel utilisateur

H3C

H3C S6520XE-HI Series Manuel utilisateur

H3C

H3C S5500-SI Series Manuel utilisateur

H3C

H3C S9500 Series Manuel utilisateur

H3C

H3C S12500 Series Manuel utilisateur

H3C

H3C S5170-EI Series Manuel du propriétaire

H3C

H3C S10500X-G Series Manuel du propriétaire

H3C

H3C S9500 Series Manuel utilisateur

H3C

H3C S5500-EI series Manuel utilisateur

H3C

H3C S9500 Series Manuel utilisateur

H3C

H3C LS-3100-16TP-EI-H3-A-O Manuel utilisateur

H3C

H3C H3C S7500E Series Manuel d'installation

H3C

H3C S3100 Series Manuel utilisateur

H3C

H3C NSQ1GP24TXEA0 LPU Manuel utilisateur

Manuels Changer populaires d'autres marques

URC

URC Total Control MFS-8 Manuel utilisateur

Azbil

Azbil HPQ-D11 Manuel utilisateur

Sony

Sony DFS-900M Manuel utilisateur

SICK

SICK i17S Manuel utilisateur

F&F

F&F SZR-277 Manuel utilisateur

Shure

Shure UAMS/BK Manuel utilisateur

Dräger

Dräger X-zone Switch Off Manuel utilisateur

Asco

Asco Joucomatic 349 Series Manuel utilisateur

BT Mini Hub Manuel utilisateur

D-Link

D-Link DES-1226G Manuel utilisateur

Johnson Controls

Johnson Controls FS80-C Manuel utilisateur

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Manuel utilisateur

MicroNet

MicroNet SP1200A Manuel utilisateur

Ruijie

Ruijie RG-PF2920 Series Manuel d'installation et d'exploitation

Altinex

Altinex DA1914SX Manuel utilisateur

MiLAN

MiLAN MIL-SM2401M Manuel utilisateur

RJM

RJM MASTERMIND PBC/6X Manuel utilisateur

Atlas

Atlas MMK-KVM8 Manuel utilisateur