GW Instek GDS-3000 Series Manuel utilisateur

Digital Storage Oscilloscope

GDS-3000 Series

USER MANUAL

ISO-9001 CERTIFIED MANUFACTURER

www. .com information@itm.com1.800.561.8187

This manual contains proprietary information, which is protected by

photocopied, reproduced or translated to another language without

prior written consent of Good Will company.

The information in this manual was correct at the time of printing.

However, Good Will continues to improve products and reserves the

rights to change specification, equipment, and maintenance

procedures at any time without notice.

Good Will Instrument Co., Ltd.

No. 7-1, Jhongsing Rd., Tucheng Dist., New Taipei City 236, Taiwan

www. .com information@itm.com1.800.561.8187

TABLE OF CONTENTS

Table of Contents

SAFETY INSTRUCTIONS .................................................. 5

GETTING STARTED........................................................ 10

GDS-3000 Series Overview................... 11

Appearance .......................................... 17

Set Up.................................................. 28

QUICK REFERENCE ....................................................... 36

Menu Tree / Operation Shortcuts ........ 38

Default Settings ................................... 52

Built-in Help ........................................ 54

MEASUREMENT ............................................................ 55

Basic Measurement ............................. 57

Cursor Measurement ........................... 76

Math Operation ................................... 82

Applications......................................... 87

Using Go_NoGo .................................. 90

Power Analysis..................................... 95

Serial Bus ............................................ 96

CONFIGURATION.......................................................... 98

Acquisition ........................................ 100

Display............................................... 106

Horizontal View ................................. 112

Vertical View (Channel)...................... 117

Trigger ............................................... 125

System Info / Language / Clock ......... 142

SAVE/RECALL ...............................................................146

File Format/Utility ............................. 147

www. .com information@itm.com1.800.561.8187

GDS-3000 Series User Manual

Create/Edit file labels......................... 151

Save ................................................... 153

Recall ................................................. 160

Reference Waveforms ......................... 165

FILE UTILITIES .............................................................167

PRINT OUT ..................................................................174

REMOTE CONTROL CONFIG ........................................177

Interface Configuration ...................... 178

Web Server ......................................... 184

MAINTENANCE ............................................................187

FAQ..............................................................................194

APPENDIX ....................................................................197

GDS-3000 Specifications .................... 197

Probe Specifications .......................... 202

GDS-3000 Dimensions ....................... 204

Declaration of Conformity .................. 205

INDEX ..........................................................................206

www. .com information@itm.com1.800.561.8187

SAFETY INSTRUCTIONS

This chapter contains important safety

instructions that you must follow during

operation and storage. Read the following before

any operation to insure your safety and to keep

the instrument in the best possible condition.

Safety Symbols

These safety symbols may appear in this manual or on the GDS-

3000.

WARNING

Warning: Identifies conditions or practices that

could result in injury or loss of life.

CAUTION

Caution: Identifies conditions or practices that

could result in damage to the GDS-3000 or to other

properties.

DANGER High Voltage

Attention Refer to the Manual

Protective Conductor Terminal

Earth (ground) Terminal

www. .com information@itm.com1.800.561.8187

GDS-3000 Series User Manual

Do not dispose electronic equipment as unsorted

municipal waste. Please use a separate collection

facility or contact the supplier from which this

instrument was purchased.

Safety Guidelines

General

Guideline

CAUTION

 Make sure the BNC input voltage does not

exceed 300Vrms.

 Never connect a hazardous live voltage to the

ground side of the BNC connectors. It might

lead to fire and electric shock.

 Do not place any heavy object on the GDS-3000.

 Avoid severe impact or rough handling that

leads to damaging the GDS-3000.

 Do not discharge static electricity to the GDS-

3000.

 Use only mating connectors, not bare wires, for

the terminals.

 Do not block the cooling fan opening.

 Do not perform measurement at a power source

or building installation site (Note below).

 Do not disassemble the GDS-3000 unless you

are qualified.

(Measurement categories) EN 61010-1:2001 specifies the

measurement categories and their requirements as follows. The

GDS-3000 falls under category II.

 Measurement category IV is for measurement performed at the

source of low-voltage installation.

 Measurement category III is for measurement performed in the

building installation.

 Measurement category II is for measurement performed on the

circuits directly connected to the low voltage installation.

 Measurement category I is for measurements performed on

circuits not directly connected to Mains.

www. .com information@itm.com1.800.561.8187

SAFETY INSTRUCTIONS

Power Supply

WARNING

 AC Input voltage: 100 ~ 240V AC, 48 ~ 63Hz,

auto selection. Power consumption: 96VA.

 Connect the protective grounding conductor of

the AC power cord to an earth ground, to avoid

electrical shock.

Cleaning the

GDS-3000

 Disconnect the power cord before cleaning.

 Use a soft cloth dampened in a solution of mild

detergent and water. Do not spray any liquid.

 Do not use chemical containing harsh material

such as benzene, toluene, xylene, and acetone.

Operation

Environment

 Location: Indoor, no direct sunlight, dust free,

almost non-conductive pollution (Note below)

 Relative Humidity: ≤80%, 40°C or below;

≤45%, 41°C ~ 50°C;

 Altitude: < 2000m

 Temperature: 0°C to 50°C

(Pollution Degree) EN 61010-1:2001 specifies the pollution degrees

and their requirements as follows. The GDS-3000 falls under degree

Pollution refers to “addition of foreign matter, solid, liquid, or

gaseous (ionized gases), that may produce a reduction of dielectric

strength or surface resistivity”.

 Pollution degree 1: No pollution or only dry, non-conductive

pollution occurs. The pollution has no influence.

 Pollution degree 2: Normally only non-conductive pollution

occurs. Occasionally, however, a temporary conductivity caused

by condensation must be expected.

 Pollution degree 3: Conductive pollution occurs, or dry, non-

conductive pollution occurs which becomes conductive due to

condensation which is expected. In such conditions, equipment

is normally protected against exposure to direct sunlight,

precipitation, and full wind pressure, but neither temperature

nor humidity is controlled.

Storage

environment

 Location: Indoor

 Temperature: -10°C to 60°C

40°C /93% RH 41°C ~60°C /65% RH

www. .com information@itm.com1.800.561.8187

GDS-3000 Series User Manual

Disposal

Do not dispose this instrument as unsorted

municipal waste. Please use a separate collection

facility or contact the supplier from which this

instrument was purchased. Please make sure

discarded electrical waste is properly recycled to

reduce environmental impact.

www. .com information@itm.com1.800.561.8187

SAFETY INSTRUCTIONS

Power cord for the United Kingdom

When using the oscilloscope in the United Kingdom, make sure the

power cord meets the following safety instructions.

NOTE: This lead/appliance must only be wired by competent persons

WARNING: THIS APPLIANCE MUST BE EARTHED

IMPORTANT: The wires in this lead are coloured in accordance with the

following code:

Green/ Yellow:

Earth

Blue:

Neutral

Brown:

Live (Phase)

As the colours of the wires in main leads may not correspond with

the coloured marking identified in your plug/appliance, proceed

as follows:

The wire which is coloured Green & Yellow must be connected to

the Earth terminal marked with either the letter E, the earth symbol

or coloured Green/Green & Yellow.

The wire which is coloured Blue must be connected to the terminal

which is marked with the letter N or coloured Blue or Black.

The wire which is coloured Brown must be connected to the

terminal marked with the letter L or P or coloured Brown or Red.

If in doubt, consult the instructions provided with the equipment

or contact the supplier.

This cable/appliance should be protected by a suitably rated and

approved HBC mains fuse: refer to the rating information on the

equipment and/or user instructions for details. As a guide, a cable

of 0.75mm2should be protected by a 3A or 5A fuse. Larger

conductors would normally require 13A types, depending on the

connection method used.

Any exposed wiring from a cable, plug or connection that is

engaged in a live socket is extremely hazardous. If a cable or plug is

deemed hazardous, turn off the mains power and remove the cable,

any fuses and fuse assemblies. All hazardous wiring must be

immediately destroyed and replaced in accordance to the above

standard.

www. .com information@itm.com1.800.561.8187

GDS-3000 Series User Manual

GETTING STARTED

This chapter describes the GDS-3000 in a nutshell,

including its main features and front / rear panel

introduction. After going through the overview,

follow the Set Up section to properly set up the

oscilloscope for first-time use. The Set Up section

also includes a starter on how to use this manual

effectively.

GDS-3000 Series Overview ..............................................11

Series lineup............................................................................ 11

Main Features......................................................................... 12

Accessories.............................................................................. 13

Package Contents .................................................................. 16

Appearance.....................................................................17

GDS-3504/3354/3254/3154 Front Panel........................ 17

GDS-3502/3352/3252/3152 Front Panel........................ 17

Rear Panel ............................................................................... 23

Display..................................................................................... 25

Set Up ............................................................................28

Tilt Stand................................................................................. 28

Power Up ................................................................................ 29

First Time Use........................................................................ 30

How to Use This Manual ..................................................... 32

www. .com information@itm.com1.800.561.8187

Autres manuels pour GDS-3000 Series

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels GW Instek Équipement de test

GW Instek

GW Instek GDS-3352A Manuel utilisateur

GW Instek

GW Instek C-1200 Manuel utilisateur

GW Instek

GW Instek GDS-3000 Series Manuel utilisateur

GW Instek

GW Instek GLC-9000 Manuel utilisateur

GW Instek

GW Instek GDS-1000-U Series Manuel utilisateur

GW Instek

GW Instek GLC-9000 Manuel utilisateur

GW Instek

GW Instek GDS-2000E Series Manuel utilisateur

GW Instek

GW Instek GDS-1000B Series Manuel du propriétaire

GW Instek

GW Instek GDS-800 Series Manuel utilisateur

GW Instek

GW Instek GPT-9000 series Manuel utilisateur

GW Instek

GW Instek GOS-630FC Manuel utilisateur

GW Instek

GW Instek GDS-1000A Series Manuel du propriétaire

GW Instek

GW Instek GLC-10000 Manuel utilisateur

GW Instek

GW Instek MDO-2000E Series Manuel utilisateur

GW Instek

GW Instek GDS-820 Programming Manuel du propriétaire

GW Instek

GW Instek GPT-9000 series Manuel utilisateur

GW Instek

GW Instek PEL-2000A Series Manuel utilisateur

GW Instek

GW Instek MSO-2000EA Manuel utilisateur

GW Instek

GW Instek PEL-3000 Series Manuel utilisateur

GW Instek

GW Instek GDS-200 Series Manuel utilisateur

GW Instek

GW Instek PEL-3000AH Series Manuel utilisateur

GW Instek

GW Instek GRS-6052A Manuel utilisateur

GW Instek

GW Instek GCT-9040 Manuel utilisateur

GW Instek

GW Instek GCP-300 Manuel utilisateur

Manuels Équipement de test populaires d'autres marques

SMART

SMART KANAAD SBT XTREME 3G Series Manuel utilisateur

Agilent Technologies

Agilent Technologies BERT Serial Manuel utilisateur

Agilent Technologies

Agilent Technologies N3280A Manuel utilisateur

Vernier

Vernier Go Direct Voltage Manuel utilisateur

Lifeloc

Lifeloc R.A.D.A.R. Manuel utilisateur

Fluke

Fluke T5-600 Instructions d'utilisation et d'installation

Mercury

Mercury TSL01 Manuel utilisateur

MAHA

MAHA MBT Series Manuel utilisateur

Fuji Electric

Fuji Electric P-61 Manuel utilisateur

ETC

ETC SealerAtor Manuel utilisateur

Skyfine

Skyfine ETHYWAY V2 Manuel utilisateur

Appion

Appion G5 Twin Manuel utilisateur

PCB Piezotronics

PCB Piezotronics 8159-0112A Manuel utilisateur

BW Technologies

BW Technologies MicroDock II Manuel utilisateur

Sun Nuclear

Sun Nuclear 1027 Manuel utilisateur

Biomark

Biomark HPR LITE READER Manuel utilisateur

Hioki

Hioki 3169-20 Manuel utilisateur

Ashcroft

Ashcroft ATE-100 Manuel utilisateur