Guardian Fall Protection 10705 Manuel utilisateur

Product Name: Concrete Anchor Strap

Instruction Manual

Part #: 10705; 10710; 10715 ; 10717; 10720

Do not throw away these instructions!

Read and understand these instructions before using equipment!

Introduction 1

Applicable Safety Standards 1

Worker Classifications 1

Safety Information 6

Product Specific Applications 1-2

Limitations 2-3

Components and Specifications 3

Maintenance, Cleaning, and Storage 5

Inspection 5

Installation and Use 4

Inspection Log 5

Labels 7

Introduction

Thank you for purchasing a Guardian Fall

Protection Concrete Anchor Strap. This

manual must be read and understood in

its entirety, and used as part of an

employee training program as required by

OSHA or any applicable state agency.

This and any other included instructions

must be made available to the user of the

equipment. The user must understand how

to safely and effectively use the Concrete

Anchor Strap, and all fall safety equipment

used in combination with the Concrete

Anchor Strap.

User Information

Date of First Use:

Serial #:

Trainer:

User:

Applicable Safety Standards

When used according to instruction specifications, this product meets or exceeds all applicable OSHA 1926

Subpart M, OSHA 1910, ANSI Z359.1-2007, and ANSI A10.32-2012 standards for fall protection. Applicable

standards and regulations depend on the type of work being done, and also might include state-specific

regulations. Consult regulatory agencies for more information on personal fall arrest systems and associated

components.

Worker Classifications

CAUTION

Understand the following definitions of those who

work near or who may be exposed to fall hazards.

Qualified Person: A person with an accredited degree or certification, and with extensive experience or

sufficient professional standing, who is considered proficient in planning and reviewing the conformity of fall

protection and rescue systems.

Competent Person: A highly trained and experienced person who is ASSIGNED BY THE EMPLOYER to be

responsible for all elements of a fall safety program, including, but not limited to, its regulation, management,

and application. A person who is proficient in identifying existing and predictable fall hazards, and who has

the authority to stop work in order to eliminate hazards.

Authorized Person: A person who is assigned by their employer to work around or be subject to potential or

existing fall hazards.

It is the responsibility of a Qualified or Competent person to supervise the job site and ensure all

applicable safety regulations are complied with.

Guardian Fall Protection

Product Specific Applications

Personal Fall Arrest: Concrete Anchor Strap may be used to support a MAXIMUM 1 PFAS for use in

Fall Arrest applications. Structure must withstand loads applied in the directions permitted by the

system of at least 5,000 lbs. Maximum free fall is 6‘, or up to 12’ if used in combination with

equipment explicitly certified for such use. Applicable D-ring: Dorsal.

WARNING

Use of equipment in unintended applications may result in serious

injury or death. Maximum 1 attachment per connection point.

Guardian Fall Protection

Restraint: Concrete Anchor Strap may be used in Restraint applications. Restraint systems prevent

workers from reaching the leading edge of a fall hazard. Always account for fully deployed length

of lanyard/SRL. Structure must withstand loads applied in the directions permitted by the system

of at least 1,000 lbs. No free fall is permitted. Restraint systems may only be used on surfaces

with slopes up to 4/12 (vertical/horizontal). Applicable D-rings: Dorsal, Chest, Side, Shoulder.

For all applications: worker weight capacity range

(including all clothing, tools, and equipment) is 130-420 lbs.

FALL CLEARANCE CALCULATION

Lanyard length

(6’ total)

Safety factor

(3’ total)

Deceleration

distance (4’ total)

Height of harness

dorsal D-ring from

worker’s feet

(6’ total)

Required

distance

from

anchorage

(19’ total)

Limitations

Compatibility: When making connections with Concrete Anchor Strap, eliminate all possibility of roll-out.

Roll-out occurs when interference between a hook and the attachment point causes the hook gate to

unintentionally open and release. All connections must be selected and deemed compatible with Concrete

Anchor Strap by a Competent Person. All connector gates must be self-closing and self-locking, and withstand

minimum loads of 3,600 lbs. See the following for examples of compatible/incompatible connections:

Fall Clearance: There must be sufficient

clearance below the anchorage connector

to arrest a fall before the user strikes the

ground or an obstruction. When calculating

fall clearance, account for a MINIMUM 3’

safety factor, deceleration distance, user

height, length of lanyard/SRL, and all other

applicable factors.

Diagram shown is an example fall

clearance calculation ONLY.

Swing Falls: Prior to installation or use, make

considerations for eliminating or minimizing

all swing fall hazards. Swing falls occur when

the anchor is not directly above the location

where a fall occurs. Always work as close to in

line with the anchor point as possible. Swing

falls significantly increase the likelihood of

serious injury or death in the event of a fall.

Connector

closed and

locked to

D-ring. OK.

Two or more

snap hooks or

carabiners

connected to

each other. NO.

Connector

to integral

lanyard.

NO.

Connector

directly to

webbing.

NO.

Work Positioning: Concrete Anchor Strap may be used in Work Positioning applications. Work

Positioning systems allow a worker to be supported while in suspension and work freely with

both hands. Structure must withstand loads applied in the directions permitted by the system of

at least 3,000 lbs. Maximum allowable free fall is 2’. Applicable D-rings: Side, Shoulder.

Ø: Total Working Angle

X: Working Distance

Along Leading Edge

Y: Distance From

Leading Edge

Guardian Fall Protection

Components and Specifications

Two connectors

to same

D-ring. NO.

Connector

directly to

horizontal

lifeline. NO.

Application

that places

load on gate.

NO.

Incompatible

or irregular

application,

which may

increase risk

of roll-out. NO.

Correct Anchorage Positioning:

This chart details allowable working zones required

to reduce risk of swing falls and improper side loading.

ALWAYS adhere to information specified by chart.

Anchor Distance

From

Leading Edge (Y)

Working Distance

Along Roof Edge

(Either Direction) (X)

Working Angle

From

Perpendicular (Ø)

6’

10’

15’

20’

25’

30’

35’

40’

45’

50’

55’

60’

8’

9’ - 9”

11’ - 7”

13’ - 3”

14’ - 6”

16’

17’ - 2”

18’ - 3”

19’ - 4”

19’ - 10”

21’ - 4”

22’ - 3”

53°

45°

38°

33°

30°

28°

26°

24°

23°

21°

For example, if the anchorage connector is 6’ from the leading

edge (Y), the working distance (X) is 8’ in each direction from

the perpendicular, which translates to a 53° working angle.

Materials: polyester, nylon, and galvanized steel.

Part # Length Description

10710

10715

3’

4’

Concrete Anchor Strap w/Loop & D-ring Ends & Protective Sheathing

10717 6’

Concrete Anchor Strap w/Loop & D-ring Ends & Protective Sheathing

10705

10720 4’

3’

Concrete Anchor Strap w/Loop Ends

Concrete Anchor Strap w/Loop & D-ring Ends

D-Ring

Anchor Webbing

Rebar Loop

Guardian Fall Protection

Installation and Use

Prior to installation, plan your system:

1. Ensure all PFAS equipment is selected and deemed compatible with Concrete Anchor Strap by a Competent

Person.

2. Select installation location for Concrete Anchor Strap. Selected installation location MUST be structural rebar

deemed compatible by a Competent Person, and must be capable of withstanding minimum application loads

as specified by this instruction manual.

3. Make considerations for eliminating or minimizing swing fall hazards.

Installation:

1. Install by sliding Rebar Loop end over embedded structural rebar, OR by wrapping Concrete Anchor Strap

around structural rebar and pulling D-ring through Rebar Loop.

2. Position Concrete Anchor Strap between forms before pouring concrete.

3. Concrete must be fully cured prior to use.

4. Attach complete and compatible PFAS to Concrete Anchor Strap D-ring.

5. If exposed to forces of Fall Arrest, if no longer in use, or if past product lifetime, IMMEDIATELY remove

Concrete Anchor Strap by cutting it off at concrete seam.

Concrete MUST be cured before use.

WARNING

Guardian Fall Protection

Maintenance, Cleaning, and Storage

If Concrete Anchor Strap fails inspection in any way, immediately remove it from service, and contact Guardian

to inquire about its return or repair.

Cleaning after use is important for maintaining the safety and longevity of Concrete Anchor Strap. Remove all

dirt, corrosives, and contaminants from Concrete Anchor Strap before and after each use. If Concrete Anchor

Strap cannot be cleaned with plain water, use mild soap and water, then rinse and wipe dry. NEVER clean

Concrete Anchor Strap with corrosive substances.

When not in use, store equipment where it will not be affected by heat, light, excessive moisture, chemicals,

or other degrading elements.

Prior to EACH use, inspect Concrete Anchor Strap for deficiencies, including, but not limited to, corrosion,

deformation, pits, burrs, rough surfaces, sharp edges, cracking, rust, paint buildup, excessive heating,

alteration, and missing or illegible labels. IMMEDIATELY remove Concrete Anchor Strap from service if defects

or damage are found, or if exposed to forces of fall arrest.

Ensure that applicable work area is free of all damage, including, but not limited to, debris, rot, rust, decay,

cracking, and hazardous materials. Ensure that selected work area will support the application-specific

minimum loads set forth in this instruction manual. Work area MUST be stable.

At least every 6 months, a Competent Person other than the user must inspect Concrete Anchor Strap.

Competent Person inspections MUST be recorded in inspection log in instruction manual and on

equipment inspection grid label. The Competent Person must sign their initials in the box

corresponding to the month and year the inspection took place.

During inspection, consider all applications and hazards Concrete Anchor Strap have been subjected to.

Inspection

Inspection Log

If equipment fails inspection IMMEDIATELY REMOVE FROM SERVICE.

Date of First Use: __________________.

Product lifetime is indefinite as long as it passes pre-use and Competent Person inspections. User must

inspect prior to EACH use. Competent Person other than user must complete formal inspection at least

every 6 months. Competent Person to inspect and initial.

This inspection log must be specific to one Concrete Anchor Strap. Separate inspection logs must be

used for each Concrete Anchor Strap. All inspection records must be made visible and available to all

users at all times.

Guardian Fall Protection

Safety Information

Failure to understand and comply with safety regulations may result in

serious injury or death. Regulations included herein are not all-inclusive,

are for reference only, and are not intended to replace a Competent

Person’s judgment or knowledge of federal or state standards.

WARNING

Do not alter equipment. Do not misuse equipment.

Workplace conditions, including, but not limited to, flame, corrosive chemicals, electrical shock, sharp objects,

machinery, abrasive substances, weather conditions, and uneven surfaces, must be assessed by a Competent

Person before fall protection equipment is selected.

The analysis of the workplace must anticipate where workers will be performing their duties, the routes they

will take to reach their work, and the potential and existing fall hazards they may be exposed to. Fall

protection equipment must be chosen by a Competent Person. Selections must account for all potential

hazardous workplace conditions. All fall protection equipment should be purchased new and in an unused

condition.

Fall protection systems must be selected and installed under the supervision of a Competent Person, and used

in a compliant manner. Fall protection systems must be designed in a manner compliant with all federal, state,

and safety regulations. Forces applied to anchors must be calculated by a Competent Person.

Unless explicitly stated otherwise, the maximum allowable free fall distance for lanyards must not exceed 6’.

No free fall allowed for non-LE SRLs. Class A SRLs must arrest falls within 24”; Class B SRLs must arrest falls

within 54”.

Harnesses and connectors selected must be compliant with manufacturer’s instructions, and must be of

compatible size and configuration. Snap hooks, carabiners, and other connectors must be selected and applied

in a compatible fashion. All risk of disengagement must be eliminated. All snap hooks and carabiners must be

self-locking and self-closing, and must never be connected to each other.

A pre-planned rescue procedure in the case of a fall is required. The rescue plan must be project-specific. The

rescue plan must allow for employees to rescue themselves, or provide an alternative means for their prompt

rescue. Store rescue equipment in an easily accessible and clearly marked area.

Training of Authorized Persons to correctly erect, disassemble, inspect, maintain, store, and use equipment

must be provided by a Competent Person. Training must include the ability to recognize fall hazards, minimize

the likelihood of fall hazards, and the correct use of personal fall arrest systems.

NEVER use fall protection equipment of any kind to hang, lift, support, or hoist tools or equipment, unless

explicitly certified for such use.

Equipment subjected to forces of fall arrest must immediately be removed from use.

Age, fitness, and health conditions can seriously affect the worker should a fall occur. Consult a doctor if there

is any reason to doubt a user’s ability to withstand and safely absorb fall arrest forces or perform set-up of

equipment. Pregnant women and minors must not use this equipment.

Physical harm may still occur even if fall safety equipment functions correctly. Sustained post-fall suspension

may result in serious injury or death. Use trauma relief straps to reduce the effects of suspension trauma.

Guardian Fall Protection

785093 (Rev. E)

Labels

User must inspect prior to

EACH use. Competent Person

must complete formal

inspection every 6 months.

Competent Person to

inspect and initial.

Product lifetime is

five years, as long as

equipment passes pre-use

and Competent Person

inspections. IMMEDIATELY

remove from service upon

expiration of product

lifetime, or if product

is no longer in use.

INSPECTION

GRID

If equipment

fails inspection,

IMMEDIATELY REMOVE

FROM SERVICE

DO NOT

REMOVE LABEL

Date of First Use:

________________

20__

Part #:

Materials:

Polyester and Steel

Concrete

Anchor Strap

Prior to use, read and

understand all

instructions provided

by manufacturer at

time of shipment.

Compliant with OSHA

1910, OSHA 1926

Subpart M, ANSI

Z359.1-07, and ANSI

A10.32-12 regulations.

Capacity range

(including all

equipment):

130-420 lbs.

MAXIMUM 1

connection per anchor.

Avoid contact with

hazards, including, but

not limited to, heat,

chemicals, electricity,

and sharp or abrasive

edges and surfaces.

WARNING

PFAS equipment must

be selected and deemed

compatible with

Concrete Anchor Strap

by a Competent Person.

Only make compatible

connections. Refer to

instructions for proper

connection methods.

Date of Manufacture:

Length:

Concrete MUST be

cured prior to use.

90082 (Rev. D)

Distributed by Engineered Fall Protection | [email protected] | (314) 492-4422 | www.EngineeredFallProtection.com

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Guardian Fall Protection Équipements de sécurité

Guardian Fall Protection

Guardian Fall Protection 53221 Manuel utilisateur

Guardian Fall Protection

Guardian Fall Protection Cable LE Lanyard Manuel utilisateur

Guardian Fall Protection

Guardian Fall Protection Arc-O-Pod Manuel utilisateur

Guardian Fall Protection

Guardian Fall Protection 01500 Manuel utilisateur

Guardian Fall Protection

Guardian Fall Protection 00691 Manuel utilisateur

Guardian Fall Protection

Guardian Fall Protection 15169 Manuel utilisateur

Guardian Fall Protection

Guardian Fall Protection 10947 Manuel utilisateur

Guardian Fall Protection

Guardian Fall Protection Cross Arm Strap Manuel utilisateur

Guardian Fall Protection

Guardian Fall Protection 00260 Manuel utilisateur

Guardian Fall Protection

Guardian Fall Protection EcoAnchor Manuel utilisateur

Guardian Fall Protection

Guardian Fall Protection GR6 Tie-Back SRL Manuel utilisateur

Guardian Fall Protection

Guardian Fall Protection Armadillo Manuel utilisateur

Guardian Fall Protection

Guardian Fall Protection CB-18 Anchor Manuel utilisateur

Guardian Fall Protection

Guardian Fall Protection G-Lok Mode d’emploi

Guardian Fall Protection

Guardian Fall Protection 10829 Manuel utilisateur

Guardian Fall Protection

Guardian Fall Protection 00432 Manuel utilisateur

Guardian Fall Protection

Guardian Fall Protection 11002 Manuel utilisateur

Guardian Fall Protection

Guardian Fall Protection Halo Web SRL Manuel utilisateur

Guardian Fall Protection

Guardian Fall Protection 61133 Manuel utilisateur

Guardian Fall Protection

Guardian Fall Protection C-Slab Grabber Manuel utilisateur

Guardian Fall Protection

Guardian Fall Protection 15026 Manuel utilisateur

Guardian Fall Protection

Guardian Fall Protection G-Bolt 00235 Manuel utilisateur

Guardian Fall Protection

Guardian Fall Protection 30800 Manuel utilisateur

Guardian Fall Protection

Guardian Fall Protection Beamer 2000 Manuel utilisateur

Manuels Équipements de sécurité populaires d'autres marques

Innova

Innova Xtirpa Mode d’emploi

bolle SAFETY

bolle SAFETY B810 Manuel utilisateur

SHENZHEN FANHAI SANJIANG ELECTRONICS

SHENZHEN FANHAI SANJIANG ELECTRONICS A9060T Manuel utilisateur

Hiltron security

Hiltron security POWER8E Mode d’emploi

Hatco

Hatco B-950P Manuel utilisateur

Sitec

Sitec TX MATIC Manuel utilisateur

TEUFELBERGER

TEUFELBERGER GRIP 12 Manuel utilisateur

MSA

MSA PremAire System Manuel utilisateur

AMC

AMC 1022M Series Manuel utilisateur

Trinity

Trinity CASS S3 Manuel utilisateur

CMC

CMC Helitack HotSeat Manuel utilisateur

Force

Force P-35 Manuel utilisateur

ACM

ACM SAFETY D200 Manuel du produit

Honeywell

Honeywell Miller H-Design DuraFlex Manuel de l'opérateur

ROCK

ROCK P-451 AS Manuel utilisateur

Power first

Power first 2XYR7A Manuel de service

SCHUBERTH

SCHUBERTH SHP 28-C Manuel utilisateur

Trango

Trango CINCH Manuel utilisateur