GSi PNEG-1724 S2 Manuel utilisateur
PNEG-1724
S2 Quick Start Guide Canister
Installation Manual
PNEG-1724
Version: 2.1
Date: 12-21-20
2PNEG-1724 S2 Quick Start Guide Canister
Personnel operating or working around this equipment should read this manual. This manual
must be delivered with equipment to its owner. Failure to read this manual and its safety
instructions is a misuse of the equipment. Any misuse of the equipment may void the warranty.
Table of Contents
PNEG-1724 S2 Quick Start Guide Canister 3
Contents
Chapter 1 Safety .....................................................................................................................................................4
Safety Guidelines .................................................................................................................................. 4
Cautionary Symbols Definitions ............................................................................................................ 5
Safety Cautions ..................................................................................................................................... 6
Safety Sign-Off Sheet ........................................................................................................................... 9
Chapter 2 General Information ...........................................................................................................................10
Chapter 3 Installation ..........................................................................................................................................11
Chapter 4 Parts List .............................................................................................................................................15
Components ........................................................................................................................................ 15
Chapter 5 Warranty ..............................................................................................................................................17
4PNEG-1724 S2 Quick Start Guide Canister
1. Safety
Safety Guidelines
Safety guidelines are general-to-specific safety rules that must be followed at all times. This manual is
written to help you understand safe operating procedures and problems that can be encountered by the
operator and other personnel when using this equipment. Save these safety guidelines for future
reference.
As owner or operator, you are responsible for understanding the requirements, hazards, and precautions
that exist and to inform others as required. Unqualified persons must stay out of the work area at all times.
Alterations must not be made to the equipment. Alterations can produce dangerous situations resulting in
SERIOUS INJURY or DEATH.
This equipment must be installed in accordance with the current installation codes and applicable
regulations,whichmustbecarefully followed inallcases. Authoritieshaving jurisdictionmustbe consulted
before installations are made.
When necessary, you must consider the installation location relative to electrical, fuel and water utilities.
Personnel operating or working around equipment must read this manual. This manual must be delivered
with equipment to its owner. Failure to read this manual and its safety instructions is a misuse of the
equipment.
ST-0001-3
1. Safety
PNEG-1724 S2 Quick Start Guide Canister 5
Cautionary Symbols Definitions
Cautionary symbols appear in this manual and on product decals. The symbols alert the user of potential
safety hazards, prohibited activities and mandatory actions. To help you recognize this information, we
use the symbols that are defined below.
DANGER
WARNING
CAUTION
NOTICE
This symbol indicates an imminently hazardous situation
which, if not avoided, will result in serious injury or death.
This symbol indicates a potentially hazardous situation
which, if not avoided, can result in serious injury or death.
This symbol indicates a potentially hazardous situation which,
if not avoided, can result in minor or moderate injury.
This symbol is used to address practices not related to
personal injury.
This symbol indicates a general hazard.
This symbol indicates a prohibited activity.
This symbol indicates a mandatory action.
ST-0005-2
1. Safety
6PNEG-1724 S2 Quick Start Guide Canister
Safety Cautions
Use Personal Protective Equipment
Eye
Protection
Hearing
Protection
Hand
Protection
Head
Protection
Respiratory
Protection Foot
Protection
Fall
Protection
• Use appropriate personal protective equipment:
• Wear clothing appropriate to the job.
• Remove all jewelry.
• Tie long hair up and back.
ST-0004-1
Follow Safety Instructions
• Carefully read all safety messages in this manual and
safety signs on your machine. Keep signs in good
condition. Replace missing or damaged safety signs.
Be sure new equipment components and repair parts
include the current safety signs. Replacement safety
signs are available from the manufacturer.
• Learn how to operate the machine and how to use
controls properly. Do not let anyone operate without
instruction.
• If you do not understand any part of this manual or
need assistance, contact your dealer.
ST-0002-1
Lifting Hazard
• Single person lift can cause injury.
• Use a mechanical lifting device to lift or move the equipment
during installation.
ST-0021-2
1. Safety
PNEG-1724 S2 Quick Start Guide Canister 7
Maintain Equipment and Work Area
• Understand service procedures before doing work. Keep area
clean and dry.
• Never service equipment while it is operating. Keep hands, feet,
and clothing away from moving parts
• Keep your equipment in proper working condition. Replace worn
or broken parts immediately.
ST-0003-1
Sharp Edge Hazard
• This product has sharp edges, which can cause serious injury.
• To avoid injury, handle sharp edges with caution and always use
proper protective clothing and equipment
ST-0036-2
ST-0037-1
Rotating Auger Hazard
• Keep clear of rotating augers and moving parts.
• Do not remove or modify guards or covers.
• Lock-out power source before making
adjustments, cleaning, or maintaining
equipment.
• Failure to follow these precautions will result
in serious injury or death.
Stay Clear of Moving Parts
• Entanglement in rotating sprocket will cause serious injury or death.
• Keep all shields and covers in place at all times.
• Lock-out power source before making adjustments, cleaning, or
maintaining equipment.
ST-0063-1
Operate Motor Properly
• All electrical connections must be made in accordance with the
National Electric Code (US) or Canadian Electrical Code (CEC).
Be sure equipment and bins are properly grounded.
• Lock-out power before resetting motor overloads.
• Do not repetitively stop and start the drive in order to free a plugged
condition. Jogging the drive in this manner can damage the
equipment and drive components.
ST-0009-2
1. Safety
8PNEG-1724 S2 Quick Start Guide Canister
Do Not Enter Bin
• Rotating flighting will kill or dismember.
• Flowing material will trap and suffocate.
• Crusted material will collapse and suffocate.
- If you must enter the bin:
1. Shut off and lock out all power sources.
2. Use a safety harness and safety line.
3. Station another person outside the bin.
4. Avoid the center of the bin.
5. Wear proper breathing equipment or respirator.
ST-0061-1
Use Unload Equipment Properly
• Do not operate this equipment alone. Make sure someone
nearby is aware of the proper shut down sequence in the event
of an emergency.
• Do not allow any person intoxicated or under the influence of
drugs to operate this equipment. All operators must be adequately
rested and prepared to perform all functions of operating
the equipment.
• Do not start equipment until all persons are clear of the work area
and safety guards are in place.
• Do not allow anyone inside a bin, truck, or wagon which is being
unloaded by an auger. Flowing grain can trap and suffocate in
seconds.
• Use ample overhead lighting after sunset to light the work area.
• Always use caution to not hit the auger when positioning the load.
• Do not leave equipment operating while unattended.
• Be aware of pinch points, which can trap or catch objects and
cause injury.
• Be sure all equipment is locked in position before operating.
• Always lock out all power sources to the equipment when
unloading is finished.
ST-0051-1
1. Safety
PNEG-1724 S2 Quick Start Guide Canister 9
Safety Sign-Off Sheet
Below is a sign-off sheet that canbe used to verify that all personnel have read and understood the safety
instructions. This sign-off sheet is provided for your convenience and personal record keeping.
Date Employee Name Supervisor Name
ST-0007
10 PNEG-1724 S2 Quick Start Guide Canister
2. General Information
NEVER enter a grain bin unless ALL power driven equipment has been shut down.
Disconnect and lock out power before entering the bin or servicing the equipment.
ALWAYS keep ALL guards and shields in place, until all the power is disconnected
and locked out.
Table des matières
Manuels Stockage populaires d'autres marques
Spectra Logic
Spectra Logic T-Series Spectra T50e Manuel utilisateur
Panasonic
Panasonic LKM-F931-1 Manuel utilisateur
Tabernus
Tabernus Enterprise Erase E2400 Manuel utilisateur
Rocstor
Rocstor COMMANDER 3F series Manuel utilisateur
HP
HP P9000 Manuel utilisateur
Western Digital
Western Digital Ultrastar Data60 Manuel utilisateur