13
4Installation Diagrams
When Surface Mounting the Door Control
a Surface Mount Collar is required.
- Fix Surface Mount Collar to
wall, ensure arrow is
pointing upwards
After fixing Surface Mount Collar to wall
(as above) and wiring is complete as per
wiring diagrams on pages 6-11, the Door
Control may then be screwed to
Surface Mount Collar using
security screws provided.
Both Security Caps are
then clipped onto the Door
Control.
To attach Security Caps: Simply
align the tabs into holes and push
on until click is heard.
Surface Mounting
Security Caps
Assigning a Door Address on Wireless Network
Step Description
1 On the Controller screen: Click ‘Wireless Network’ and then
Click ‘Allow Doors to Join this Controller’
All Door Controls that don’t have an address start to beep out the next
available address. The Keys will also illuminate to indicate the next
address. e.g Keys 1 & 5 will be ON for address number 15.
2 Hit any key on the ‘beeping’ Door Control to assign this address or
present a Card on the ‘beeping’ Proximity unit to assign this address.
When a Door Control is assigned an address, all unassigned Door
Controls will start to beep the next available address.
3 When all doors are assigned: Click ‘Secure Network’
Note: While assigning door addresses, leave the Controller Screen open or the
network will be Secured automatically , stopping doors from joining the network.
Assigning a Door Address on a Wired 485 Network
Step Description
1 Right Click on the Controller Icon & select ‘Manually Assign Addresses’
Follow Step 2 above to complete the process.
Enrolling Door Controls
