Grundig GCI-H2505B Manuel utilisateur

GCI-H2505B.82.1.01.03.2013

Owner's Manual

IP Cameras & Domes

GCI-H2505B 1.3 Megapixel Full HD CMOS Box IP-Camera ICR WDR Low Light

GCI-K2505B 2 Megapixel Full HD CMOS Box IP-Camera ICR WDR Low Light

Content:

1. Introduction 2

2. Important Safety Instructions 2

3. Package Contents 2

4. Installation 3

1. Camera Overview 3

2. System Requirements 3

3. Lens Mounting 4

4. Power Connection 4

5. Ethernet Cable Connection 4

6. Alarm Application 5

5. Accessing the Camera 5

6. Video Resolution Setup 9

7. Browser-based Viewer Introduction 10

8. Home Page 11

9. System Related Settings 13

1. Host Name & System Time Setting 13

2. Security 14

3. Network 23

4. DDNS 29

5. Mail 30

6. FTP 31

7. HTTP 32

8. Application (Alarm Settings) 33

9. Motion Detection 38

10. Network Failure Detection 42

11. Periodical Event 44

12. Tampering 46

13. Storage Management (on Camera) 48

14. Recording (on Camera) 51

15. Schedule 52

16. File Location (on PC) 53

17. Iris Adjustment 54

18. View Information 54

19. Factory Default 58

20. Software Version 59

21. Software Upgrade 59

22. Maintenance 60

10. Streaming Settings 62

1. Video Format 62

2. Video Compression 64

3. Video OCX Protocol 65

4. Video ROI 66

5. Video Frame Rate 67

6. Video Mask 68

7. Audio (Audio and Bit Rate Settings) 69

11. Camera Settings 70

1. Exposure Setting 71

2. White Balance Setting 72

3. Picture Adjustment 73

4. Digital Zoom Setting 73

5. IR Function 74

6. Gamma WDR 74

7. 3DNR 74

8. 2DNR 74

9. DIS 75

10. TV System Setup 75

12. Pan/Tilt 76

1. Preset 77

2. Sequence 78

3. Pan/Tilt Control 79

13. Logout 80

14. CMS Software Introduction 80

15. Internet Security Settings 81

16. GRUNDIG Viewer Download Procedure 84

17. Install UPnP Components 86

18. Deleting the Existing GRUNDIG Viewer 88

19. Back Focus Adjustment 90

English

1. Introduction

The Full HD Multiple Streaming Ultra-WDR Box IP Cameras GCI-H2505B and GCI-K2502B support the H.264 and

MJPEG standard. The performance of the H.264 encoder is up to 1080P 60fps. Also, the IP Cameras support the

Dual Full HD 1080P real-time streaming.

With more computing power, these IP Cameras can provide more flexibility for users and system managers. In

addition, these IP Cameras are equipped with the Shutter WDR function, which can provide a better image quality

under extreme light contrast scenarios or changing lighting environments.

2. Important Safety Instructions

Be sure to use only the standard adapter that is specified in the specification sheet. Using any other adapter

could cause fire, electrical shock, or damage to the product. Incorrectly connecting the power supply may cause

explosion, fire, electric shock, or damage to the product. Do not connect multiple products to one single adapter.

Exceeding the capacity may cause abnormal heat generation or fire.

Do not place conductive objects (e.g. screwdrivers, coins or any metal items) or containers filled with water on

top of the product. Doing so may cause personal injury due to fire, electric shock, or falling objects.

If any unusual smells or smoke comes out of the unit, stop using the product. In this case, immediately

disconnect the power source and contact the service center. Continued use in such a condition may cause fire or

electric shock.

If this product fails to operate normally, contact the nearest service center. Never disassemble or modify this

product in any way. (GRUNDIG is not liable for problems caused by unauthorised modifications or attempted

repair.)

To prevent fire or electric shock, do not expose the inside of this device to rain or moisture.

3. Package Contents

These parts are included:

English

4. Installation

Do not install the product in a location subject to high temperature (over 50°C), low temperature (below -10°C), or

high humidity. Doing so may cause fire or electric shock. Keep out of direct sunlight and heat radiation sources.

This may cause fire. Avoid aiming the camera directly towards extremely bright objects such as the sun, as this

may damage the image sensor.

Do not install the unit in humid, dusty or sooty locations. Doing so may cause fire or electric shock. Install it in a

place with good ventilation.

When installing the unit, fasten it securely and firmly. A falling unit may cause personal injury.

If you want to relocate the already installed product, be sure to turn the power off and then move or reinstall it.

4.1. Camera Overview

4.2. System Requirements

To perform the IP Camera via web browser, please ensure your PC is in good network connection, and meets the

system requirements as described below.

Personal Computer :

1.) Intel Pentium M, 2.16 GHz or Intel Core 2 Duo, 2.0 GHz

2.) 2 GB RAM or more

Operating System :

Windows XP / Windows VISTA / Windows 7

English

Web Browser :

Microsoft Internet Explorer 6.0 or later

Firefox

Chrome

Safari

Network Card :

10Base-T (10 Mbps) or 100Base-TX (100 Mbps) operation

Viewer :

ActiveX control plug-in for Microsoft IE

4.3. Lens Mounting

Lens Mounting for C/CS Mount Lens Model:

It is possible to attach all CS-Mount lenses with manual or DC controlled iris on the camera. Please remove the

camera’s plastic covering first and then attach the CS-Mount lens onto the camera. If you would like to use a C-

Mount lens, you need a 5 mm C/CS Mount Adapter between the camera and the C-Mount lens, as shown in the

illustration below.

4.4. Power Connection

Please refer to section 4.1. Camera Overview for power wiring. Additionally, if using PoE, make sure Power

Sourcing Equipment (PSE) is in use in the network.

4.5. Ethernet Cable Connection

Use of Category 5 Ethernet cable is recommended for network connection. To have the best transmission quality,

the cable length shall not exceed 100 meters. Connect one end of the Ethernet cable to the RJ45 connector of the

IP Camera, and the other end of the cable to the network switch or PC.

NOTE: In some cases, you may need to use an Ethernet crossover cable when connecting the IP Camera directly

to the PC.

Check the status of the link indicator and the activity indicator LEDs. If the LEDs are unlit, please check the LAN

connection.

Green Link Light indicates good network connection.

Orange Activity Light flashes for network activity indication.

English

4.6. Alarm Application

The camera is equipped with one alarm input and one relay output for alarm application. Please refer to the

alarm pin definition below for the connection of alarm devices to the IP Camera if needed.

Alarm Pin Definition :

PIN 1: Output+

PIN 2: Output-

PIN 3: Input+

PIN 4: Input

PIN 5: GND

PIN 6: D-

PIN 7: D+

5. Accessing the Camera

For initial access to the IP Camera, users can search the camera through the installer program: GRUNDIG

Finder.exe, which can be found on the supplied CD.

GRUNDIG Finder Software Setup :

Step 1: Double-click on the program GRUNDIG Finder.exe (see the desktop icon below). Its window will appear as

shown below. Then click on the “Find Device” button.

Step 2: The security alert window will pop up. Click “Unblock” to continue.

English

Device Search :

Step 3: Click “Find Device” again, afterwards all IP devices found will be listed on the page, as shown in the

picture below. The IP Camera’s default IP address is: 192.168.1.1.

Step 4: Double-click or right-click and select “Browse” to access the camera directly via the web browser.

Step 5: Then the dialogue box for entering the default user name and password (as shown below) will appear

for login to the IP Dome Camera.

The default login ID and password for the Administrator are:

Password: 1234

English

NOTE: ID and password are case sensitive.

It is strongly advised to alter the administrator’s password due to security concerns. Please refer to section 9.2.

Security for further details.

Additionally, users can change the IP Camera’s network property, either to DHCP or Static IP, directly in the

device finding list. Please refer to the following section for changing the IP Camera’s network property.

Example of changing the network property of the IP Camera :

Users can directly change an IP Camera’s network property, e.g. from static IP to DHCP, in the finding device list.

The procedure to change the IP Camera’s network property is explained below:

Step 1: In the ﬁnding device list, click on the IP Camera of which you would like to change the network property.

Right-click on the selected item, and select “Network Setup”. Meanwhile, record the IP Camera’s MAC address

for future identification.

Step 2: The “Network Setup” page will come out. Select “DHCP,” and click on the “Apply” button at the bottom of

the page.

Step 3: Click on “OK” in the Note of setting the change. Wait for one minute to search again for the IP Camera.

English

Step 4: Click on the “Find Device” button to search all the devices. Then select the IP Camera with the correct

MAC address. After double-clicking on the IP Camera, the login window will appear.

Step 5: Enter User name and Password to access the IP Camera.

Installing the GRUNDIG Viewer Software Online :

For initial access to the IP Camera, a client program, GRUNDIG Viewer, will be automatically installed to your PC

when connecting to the IP Camera.

If the Web browser does not allow the GRUNDIG Viewer installation, please check the Internet security settings or

ActiveX controls and plug-ins settings (see 15. Internet Security Settings) to continue the process.

The Information Bar (just below the URL bar) may come out and ask for permission to install the ActiveX Control

for displaying video in browser (see the picture below). Right-click on the Information Bar and select “Install

ActiveX Control…” to allow the installation.

Then the security warning window will pop up. Click “Install” to carry on with the software installation.

Click on “Finish” to close the GRUNDIG Viewer window when download is finished. For the detailed software

download procedure, please refer to chapter 16. GRUNDIG Viewer Download Procedure.

NOTE: If the Live Video Pane on the Home Page cannot be shown to the users who have installed the GRUNDIG

Viewer on the PC previously, please refer to the procedure in chapter 18. Delete the Existing GRUNDIG Viewer.

English

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Grundig Caméra de sécurité

Grundig

Grundig GD-CI-AT3637V Manuel utilisateur

Grundig

Grundig GU-CI-AP12616F Manuel utilisateur

Grundig

Grundig GD-CI-CP4637V Manuel utilisateur

Grundig

Grundig GCI-G1536F Manuel utilisateur

Grundig

Grundig GCI-K1607B Manuel utilisateur

Grundig

Grundig GCT-K1326T Manuel utilisateur

Grundig

Grundig GD-CI-AT30516Q Manuel utilisateur

Grundig

Grundig GD-CI-BT4537VH Manuel utilisateur

Grundig

Grundig GCI-K1812W Manuel utilisateur

Grundig

Grundig GD-CI-AC1616V Manuel utilisateur

Grundig

Grundig GU-CI-AC8616V Manuel utilisateur

Grundig

Grundig GD-CI-AP2605B Manuel utilisateur

Grundig

Grundig GCH-K0323V Manuel utilisateur

Grundig

Grundig GD-CI-AP4647P Manuel utilisateur

Grundig

Grundig GD-CI-AP2627T Manuel utilisateur

Grundig

Grundig GCA-C0335P Manuel utilisateur

Grundig

Grundig GD-CI-CC2616T Manuel utilisateur

Grundig

Grundig GD-TI-AP4507T Manuel utilisateur

Grundig

Grundig GD-CI-AP2647P Manuel utilisateur

Grundig

Grundig GD-CI-CC4637T Manuel utilisateur

Grundig

Grundig GD-CI-AT2505B Manuel utilisateur

Grundig

Grundig GD-CI-BP4637E Manuel utilisateur

Grundig

Grundig GCI-K0512W Manuel utilisateur

Grundig

Grundig GU-CI-AC5617T Manuel utilisateur

Manuels Caméra de sécurité populaires d'autres marques

Okina USA

Okina USA SIR36-870VF650LP Manuel utilisateur

Divio

Divio NDR155PA Manuel utilisateur

Canon

Canon VB-C500D Manuel utilisateur

Easy Access

Easy Access EasyGuard Manuel utilisateur

Vivotek

Vivotek FD9389-EHV-v2 Manuel utilisateur

TUYA

TUYA COSMO W2 Manuel utilisateur

Eusso

Eusso UNC7500-IR Guide de configuration

urmet domus

urmet domus 1096/204 Manuel utilisateur

VC VC20 series Manuel utilisateur

Axis

Axis Q1614 Manuel utilisateur

ieGeek

ieGeek DD201 Manuel utilisateur

VADDIO

VADDIO ClearVIEW HD-USB PTZ 999-6990-000 Manuel utilisateur

Vicon

Vicon V662-D-1 Mode d'emploi

Lorex

Lorex VANTAGE LBC7032 Manuel utilisateur

4xem

4xem WPT Manuel utilisateur

Samsung

Samsung SCV-3082 Manuel utilisateur

Vitek

Vitek VTC-C544 Manuel utilisateur

Lumens

Lumens VC-A50PNW Manuel utilisateur