Grundfos SI 010 CNV Manuel utilisateur

SI 010 CNV

GRUNDFOS INSTRUCTIONS

Installation and operating instructions

Declaration of Conformity

We, Grundfos, declare under our sole responsibility that the product SI 010 CNV, to which this

declaration relates, is in conformity with these Council directives on the approximation of the laws of the

EC member states:

– Low Voltage Directive (2006/95/EC).

Standard used: EN 61010-1: 2001.

– EMC Directive (2004/108/EC).

Standard used: EN 61326-1: 2006.

Konformitätserklärung

Wir, Grundfos, erklären in alleiniger Verantwortung, dass das Produkt SI 010 CNV, auf das sich diese

Erklärung bezieht, mit den folgenden Richtlinien des Rates zur Angleichung der Rechtsvorschriften der

EU-Mitgliedsstaaten übereinstimmt:

– Niederspannungsrichtlinie (2006/95/EG).

Norm, die verwendet wurde: EN 61010-1: 2001.

– EMV-Richtlinie (2004/108/EG).

Norm, die verwendet wurde: EN 61326-1: 2006.

Déclaration de Conformité

Nous, Grundfos, déclarons sous notre seule responsabilité, que le produit SI 010 CNV, auquel se réfère

cette déclaration, est conforme aux Directives du Conseil concernant le rapprochement des législations

des Etats membres CE relatives aux normes énoncées ci-dessous :

– Directive Basse Tension (2006/95/CE).

Norme utilisée : EN 61010-1: 2001.

– Directive Compatibilité Electromagnétique CEM (2004/108/CE).

Norme utilisée : EN 61326-1: 2006.

Dichiarazione di Conformità

Grundfos dichiara sotto la sua esclusiva responsabilità che il prodotto SI 010 CNV, al quale si riferisce

questa dichiarazione, è conforme alle seguenti direttive del Consiglio riguardanti il riavvicinamento delle

legislazioni degli Stati membri CE:

– Direttiva Bassa Tensione (2006/95/CE).

Norma applicata: EN 61010-1: 2001.

– Direttiva EMC (2004/108/CE).

Norma applicata: EN 61326-1: 2006.

Declaración de Conformidad

Nosotros, Grundfos, declaramos bajo nuestra propia responsabilidad que el producto SI 010 CNV, al

cual se refiere esta declaración, está conforme con las Directivas del Consejo en la aproximación de las

leyes de los Estados Miembros del EM:

– Directiva de Baja Tensión (2006/95/CE).

Norma aplicada: EN 61010-1: 2001.

– Directiva EMC (2004/108/CE).

Norma aplicada: EN 61326-1: 2006.

Δήλωση Συμμόρφωσης

Εμείς, ηGrundfos, δηλώνουμε με αποκλειστικά δική μας ευθύνη ότι τα προϊόντα SI 010 CNV, στα οποία

αναφέρεται ηπαρούσα δήλωση, συμμορφώνονται με τις εξής Οδηγίες του Συμβουλίου περί προσέγγισης

των νομοθεσιών των κρατών μελών της ΕΕ:

–Οδηγία χαμηλής τάσης (2006/95/EC).

Πρότυπο που χρησιμοποιήθηκε: EN 61010-1: 2001.

–Οδηγία Ηλεκτρομαγνητικής Συμβατότητας (EMC) (2004/108/EC).

Πρότυπο που χρησιμοποιήθηκε: EN 61326-1: 2006.

Overensstemmelseserklæring

Vi, Grundfos, erklærer under ansvar at produktet SI 010 CNV som denne erklæring omhandler, er i

overensstemmelse med disse af Rådets direktiver om indbyrdes tilnærmelse til EF-medlemsstaternes

lovgivning:

– Lavspændingsdirektivet (2006/95/EF).

Anvendt standard: EN 61010-1: 2001.

– EMC-direktivet (2004/108/EF).

Anvendt standard: EN 61326-1: 2006.

Deklaracja zgodności

My, Grundfos, oświadczamy z pełnąodpowiedzialnością, że nasze wyroby SI 010 CNV, których

deklaracja niniejsza dotyczy, sązgodne z następującymi wytycznymi Rady d/s ujednolicenia przepisów

prawnych krajów członkowskich WE:

– Dyrektywa Niskonapięciowa (LVD) (2006/95/WE).

Zastosowana norma: EN 61010-1: 2001.

– Dyrektywa EMC (2004/108/WE).

Zastosowana norma: EN 61326-1: 2006.

Декларация осоответствии

Мы, компания Grundfos, со всей ответственностью заявляем, что изделия SI 010 CNV, ккоторым

относится настоящая декларация, соответствуют следующим Директивам Совета Евросоюза об

унификации законодательных предписаний стран-членов ЕС:

–Низковольтное оборудование (2006/95/EC).

Применявшийся стандарт: EN 61010-1: 2001.

–Электромагнитная совместимость (2004/108/EC).

Применявшийся стандарт: EN 61326-1: 2006.

Megfelelőségi nyilatkozat

Mi, a Grundfos, egyedüli felelősséggel kijelentjük, hogy a SI 010 CNV termék, amelyre jelen nyilatkozik

vonatkozik, megfelel az Európai Unió tagállamainak jogi irányelveit összehangoló tanács alábbi

előírásainak:

– KisfeszültségűDirektíva (2006/95/EK).

Alkalmazott szabvány: EN 61010-1: 2001.

– EMC Direktíva (2004/108/EK).

Alkalmazott szabvány: EN 61326-1: 2006.

Prohlášení o shodě

My firma Grundfos prohlašujeme na svou plnou odpovědnost, že výrobek SI 010 CNV, na nějž se toto

prohlášení vztahuje, je v souladu s ustanoveními směrnice Rady pro sblížení právních předpisů

členských státůEvropského společenství v oblastech:

–Směrnice pro nízkonapět’ové aplikace (2006/95/ES).

Použitá norma: EN 61010-1: 2001.

–Směrnice pro elektromagnetickou kompatibilitu (EMC) (2004/108/ES).

Použitá norma: EN 61326-1: 2006.

Bjerringbro, 15th June 2009

Henning Sandager

Technical Director

SI 010 CNV

Installation and operating instructions 6

Montage- und Betriebsanleitung 19

Notice d'installation et de fonctionnement 31

Istruzioni di installazione e funzionamento 43

Instrucciones de instalación y funcionamiento 56

Οδηγίες εγκατάστασης και λειτουργίας 69

Monterings- og driftsinstruktion 81

Instrukcja montażu i eksploatacji 93

Руководство по монтажу иэксплуатации 105

Szerelési és üzemeltetési utasítás 119

Montážní a provozní návod 131

Original installation and operating instructions.

CONTENTS Page

1. Symbols used in this document 6

2. General description 7

2.1 Application 7

2.2 Nameplate 7

2.3 Installation kit 7

3. Configuration 8

3.1 ST5 - supply voltage 9

3.2 ST3 and ST4 - sensor inputs 9

3.3 ST1 and ST2 - signal outputs 10

3.4 Configuration examples 11

4. Installation 13

4.1 Mounting 13

4.2 Electrical connection 14

4.2.1 Connection of supply voltage and sensor 15

5. Technical data 17

6. Disposal 18

1. Symbols used in this document

Warning

Prior to installation, read these installation and operating

instructions. Installation and operation must comply with

local regulations and accepted codes of good practice.

Warning

If these safety instructions are not observed, it may result in

personal injury!

Caution

If these safety instructions are not observed, it may result in

malfunction or damage to the equipment!

Note

Notes or instructions that make the job easier and ensure safe

operation.

2. General description

Grundfos SI 010 CNV, sensor interface, is an external power supply, signal

amplifier and signal converter for Grundfos sensors. SI 010 CNV has built-in

precision resistors enabling the transmitter to give 1-5 V and 2-10 V output

signals in stead of 4-20 mA.

2.1 Application

SI 010 CNV is used in sensor applications with controllers with 4-20 mA

inputs in which the pressure and flow measurements are carried out by

products from the Grundfos Direct Sensors™ standard product range.

2.2 Nameplate

Fig. 1 Example of nameplate

2.3 Installation kit

The SI 010 CNV package contains these parts:

• SI 010 CNV unit

• installation and operating instructions for SI 010 CNV.

TM04 4898 2209

Pos. Description

1 Type designation

2 Product number

3 Version number

4 Production code (year and week)

5 Serial number

6IPclass

7 Supply voltage

8 Maximum input power

9CEmarking

Type

Product No.

Pmax

Serial No.

P.c.

V-No.

Made in Thailand

SENSOR INTERFACE

3. Configuration

Set the converter (SI 010 CNV) to the desired function before installing it.

Carefully tip off the cover of the plastic cabinet using a small, flat

screwdriver. See fig. 2.

Fig. 2 Press in the tabs on both sides using a screwdriver

Inside the converter six small jumpers can be placed differently depending

on the desired function. The short-circuit positions are designated ST1, ST2,

ST3, ST4, ST5. See fig. 3.

Fig. 3 Short-circuit positions on PC board

Figure 3 shows a picture of SI 010 CNV without cover. The circles, ST1-ST5,

show the physical position of the short-circuit positions.

TM04 4883 2209TM04 4884 2209

Warning

The SI 010 CNV must be configured before cables are

connected as it is highly dangerous to configure the unit

when power is connected.

ST1 ST2

ST3 ST4

ST5

3.1 ST5 - supply voltage

In position ST5, SI 010 CNV can be set to either 230 V or 115 V supply

voltage:

• one jumper across the two pins in the middle = 230 V

• two jumpers as shown in fig. 4 = 115 V.

If the converter is connected to 24 VDC, the configuration of ST5 has no

function.

Fig. 4 How to set SI 010 CNV to 230 V and 115 V

3.2 ST3 and ST4 - sensor inputs

The sensors are available in two versions with different output signals, either

0.5 - 3.5 V or 0.5 - 4.5 V. The converter is compatible with both signal types

which are configured in short-circuit positions ST3 and ST4.

Caution

The SI 010 CNV can be connected to either 230/115 VAC or

24 VDC. It must NOT be connected to both voltages.

TM04 4885 2209, TM04 4886 2209

Short-circuit

position Location

(see fig. 7) Function

ST3 LInput 1, input voltage 0.5 - 3.5 V

(factory setting)

H Input 1, input voltage 0.5 - 4.5 V

ST4 LInput 2, input voltage 0.5 - 3.5 V

(factory setting)

H Input 2, input voltage 0.5 - 4.5 V

Set to 230 V (factory setting)

Set to 115 V

Fig. 5 ST3 (input 1) is configured for sensors giving an 0.5 - 3.5 V signal,

ST4 (input 2) is configured for sensors giving an 0.5 - 4.5 V signal

3.3 ST1 and ST2 - signal outputs

Fig. 6 ST1 (output 1) is set to 2-10 V, and ST2 (output 2) to 1-5 V

TM04 4888 2206

Short-circuit

position Location

(see fig. 7) Function

ST1

I Output 1, output current 4-20 mA (factory setting)

U1 Output 1, output voltage 2-10 V

U2 Output 1, output voltage 1-5 V

ST2

I Output 2, output current 4-20 mA (factory setting)

U1 Output 2, output voltage 2-10 V

U2 Output 2, output voltage 1-5 V

TM04 4887 2209

Autres manuels pour SI 010 CNV

Table des matières

Langues :

Autres manuels Grundfos Instrument de mesure

Grundfos

Grundfos DIT-M Manuel utilisateur

Grundfos

Grundfos AquaCel AQC-D3 Manuel utilisateur

Grundfos

Grundfos iGRID Pit measure point Manuel utilisateur

Grundfos

Grundfos iSolutions Monitor Manuel utilisateur

Grundfos

Grundfos CRN MAGdrive Manuel utilisateur

Grundfos

Grundfos DIT Manuel utilisateur

Grundfos

Grundfos Conex DIA-2 Manuel utilisateur

Grundfos

Grundfos Vortex Flow Industry Manuel utilisateur

Grundfos

Grundfos AQC-D12 Manuel utilisateur

Grundfos

Grundfos AQC-D6 Manuel utilisateur

Grundfos

Grundfos TPE 2 Series Manuel d'utilisation

Grundfos

Grundfos AQC-D4 Manuel utilisateur

Grundfos

Grundfos CU 362 Manuel utilisateur

Grundfos

Grundfos AQC-D6 Manuel utilisateur

Grundfos

Grundfos AQC-D12 Manuel utilisateur

Grundfos

Grundfos DIT-L Manuel utilisateur

Grundfos

Grundfos BACMON Manuel utilisateur

Grundfos

Grundfos Conex DIS-C Manuel utilisateur

Grundfos

Grundfos AQC-D5 Manuel utilisateur

Grundfos

Grundfos Dosing monitor Manuel utilisateur

Grundfos

Grundfos iSolutions Monitor Manuel utilisateur

Manuels Instrument de mesure populaires d'autres marques

Suaoki

Suaoki D40 Manuel utilisateur

Elster

Elster BK-G1.6 Manuel utilisateur

Endress+Hauser

Endress+Hauser Deltabar FMD71 Manuel

Duratool

Duratool D03128 Manuel utilisateur

Vega

Vega VEGAPULS 65 Manuel utilisateur

Tonghui

Tonghui TH2618B Manuel utilisateur

Tenmars

Tenmars TM-801 Manuel utilisateur

MSR

MSR 145 Manuel utilisateur

TPS

TPS WP-82 Manuel utilisateur

ELMETRON

ELMETRON CP-511 Manuel utilisateur

PCB Piezotronics

PCB Piezotronics 003C30 Manuel utilisateur

Tenma

Tenma 72-10465 Manuel utilisateur

Endress+Hauser

Endress+Hauser Proline Promag 50 Caractéristiques techniques

Siemens

Siemens SITRANS F Coriolis FCT030 Manuel de la liste des pièces

KLINGER

KLINGER CMF V Series Manuel utilisateur

EXFO

EXFO FTB-2 Manuel d'exploitation et d'entretien

Keysight

Keysight M8290A Manuel utilisateur

ADTEK

ADTEK MW-5 Manuel utilisateur