Grizzly T26857 Manuel utilisateur
For questions or help with this product contact Tech Support at (570) 546-9663 or techsupport@grizzly.com
MODEL T26857
AIR HOSE REEL
w/30' HOSE
INSTRUCTIONS
COPYRIGHT © JULY, 2014 BY GRIZZLY INDUSTRIAL, INC.
NO PORTION OF THIS MANUAL MAY BE REPRODUCED IN ANY SHAPE
OR FORM WITHOUT THE WRITTEN APPROVAL OF GRIZZLY INDUSTRIAL, INC.
#TSMN16683 PRINTED IN CHINA
To reduce the risk of injury when using this
tool:
• Make sure incoming air pressure does
not exceed maximum rating of 250
PSI. Otherwise fittings could crack or
explode.
• Protect your eyes by wearing safety
glasses or a face shield when assem-
bling and using hose reel.
• Pressurized air may cause injury to
exposed body parts. Never expose any
part of your body to pressurized air.
• Make sure hose reel is firmly mounted to
a stable surface before pressurizing.
Specifications
Max. Incoming Air Pressure ................... 250 PSI
Included Hose Length ................................. 30 ft.
Max. Hose Length on Reel ......................... 50 ft.
Air Fitting Size .........................................1⁄4" NPT
Air Hose Diameter ...........................................3⁄8"
Inventory
Description Qty
A. Hose Reel Assembly .................................. 1
B. Handle ........................................................ 1
C. Lock Nuts M6-1 .......................................... 3
D. Phillips Head Screws M6-1 X 12 ................ 3
Figure 1. Model T26857 inventory components.
A
CB
D
Introduction
The Model T26857 Air Hose Reel can be mount-
ed on nearly any flat surface, including floors,
workbenches, walls, and ceilings. It is equipped
with 30' of 3⁄8" air hose, but it can accommodate
hose lengths up to 50'.
EYE INJURY HAZARD!
Always wear safety glasses
during use to prevent
serious personal injury.
-2- T26857 Air Hose Reel w/30' Hose
Assembly
Tools Required Qty
Open End Wrench 10mm .................................. 1
Phillips Head Screwdriver #2 ............................ 1
1. Attach handle to air hose reel assembly with
M6-1 X 12mm Phillips head screws and M6-1
lock nuts (see Figure 2).
Figure 2. Handle installed on air hose reel.
Handle
The strongest mounting option is a "Through
Mount" (see Figure 4) where holes are drilled all
the way through the workbench—and hex bolts,
washers, and hex nuts are used to secure the
machine in place.
Mounting
Figure 3. Mounting points in base of hose reel.
Mounting Holes
The base of the Model T26857 has mounting
holes (see Figure 3) that allow it to be fastened to
a workbench or other mounting surface to prevent
it from moving during operation and causing acci-
dental injury or damage.
Machine Base
Workbench
Hex
Bolt
Flat Washer
Flat Washer
Lock Washer
Hex Nut
Another option is a "Direct Mount" (see Figure
5) where the machine is secured directly to the
workbench with lag screws and washers.
Machine Base
Workbench
Lag Screw
Flat Washer
Figure 5. Example of a "Direct Mount" setup.
Figure 4. Example of a "Through Mount" setup.
T26857 Air Hose Reel w/30' Hose -3-
To mount reel:
1. Place reel in desired position and mark loca-
tions of mounting holes.
2. Remove reel and drill 3⁄8" holes in locations
marked in Step 1.
3. Use 3⁄8" diameter mounting hardware to
secure reel.
Operation
1. Connect air compressor hose to air inlet fit-
ting on reel (see Figure 6).
Figure 6. Location of air inlet fitting.
Air Inlet Fitting
2. Connect air tool to other end of hose.
3. Use handle on air hose reel to unwind
required amount of hose for operation.
4. When finished, disconnect tool and rewind air
hose.
-4- T26857 Air Hose Reel w/30' Hose
T26857 Parts
1
2
4
5
6
7
8
9
10
11
12
13
15
16
17
1819
20
21
14
Pneumatic
Accessories
Pneumatic
Accessories
T26857
22
23
24
25 26 27
MODEL T26857
HOSE REEL 3/8" x 30'
WARNING!
Toreduce the risk of serious personal injury during use:
1. Read and understand manual before using.
2. Disconnect from air supply before servicing.
3. Wear ANSI-approved eye protection.
4. DO NOT exceed maximum pressure rating of 250 PSI.
5. Only attach hose reel to air supply with flexible hose.
Solid pipe may fail due to vibrations caused during
reeling of hose.
6. Prevent unauthorized use by children or untrained
users.
REF PART # DESCRIPTION REF PART # DESCRIPTION
1 PT26857001 BASE 15 PT26857015 LOCK NUT M6-1
2 PT26857002 STAND 16 PT26857016 FLAT WASHER 6MM
4 PT26857004 FLAT WASHER 23 X 2.5MM 17 PT26857017 PLASTIC PROTECTOR
5 PT26857005 SLEEVE 18 PT26857018 HOSE CLAMP
6 PT26857006 FLANGE 19 PT26857019 HEX BOLT M6-1 X 120
7 PT26857007 SLEEVE 20 PT26857020 PHLP HD SCR M6-1 X 12
8 PT26857008 FLANGE 21 PT26857021 FLAT WASHER 6MM
9 PT26857009 SLEEVE 22 PT26857022 LOCK NUT M6-1
10 PT26857010 SEALING WASHER 23 X 0.9MM 23 PT26857023 HANDLE
11 PT26857011 COMPRESSION SPRING 24 PT26857024 VALVE
12 PT26857012 FLAT WASHER 21.5 X 1.5MM 25 PT26857025 MACHINE ID LABEL
13 PT26857013 SWIVEL VALVE 26 PT26857026 QR CODE LABEL
14 PT26857014 EXT RETAINING RING 15MM 27 PT26857027 PNEUMATIC ACCESSORIES LABEL
Autres manuels Grizzly Outils
Grizzly
Grizzly T10264 Manuel utilisateur
Grizzly
Grizzly H8188 Manuel utilisateur
Grizzly
Grizzly H7585 Manuel utilisateur
Grizzly
Grizzly H7583 Manuel utilisateur
Grizzly
Grizzly T23034 Manuel utilisateur
Grizzly
Grizzly G0497 Manuel utilisateur
Grizzly
Grizzly H0613 Manuel utilisateur
Grizzly
Grizzly G0711 Manuel utilisateur
Grizzly
Grizzly T32838 Manuel utilisateur
Grizzly
Grizzly H6472 Manuel utilisateur
Grizzly
Grizzly G4181 Manuel utilisateur
Grizzly
Grizzly T30027 Manuel utilisateur
Grizzly
Grizzly G0497 Guide de démarrage rapide
Grizzly
Grizzly C1367 Manuel utilisateur
Grizzly
Grizzly H3142 Guide de démarrage rapide
Grizzly
Grizzly T23124 Manuel utilisateur
Grizzly
Grizzly T32730 Manuel utilisateur
Grizzly
Grizzly T10432 Manuel utilisateur
Grizzly
Grizzly T10812 Manuel utilisateur
Grizzly
Grizzly G1600 Manuel utilisateur
