Grizzly T33682 Manuel utilisateur

For questions or help with this product contact Tech Support at (570) 546-9663 or techsupport@grizzly.com

MODEL T33682

DRILL PRESS TRAY

INSTRUCTIONS

Introduction

***Keep for Future Reference***

The Model T33682 holds bits, chucks and other

equipment for your drill press. It easily mounts to a

drill press column up to 43⁄4" in diameter, and can

be conveniently rotated 360° during operations for

closer access.

The tray size is 113⁄8" across and has pre-drilled

mounting holes for bit sizes 1⁄16" to 1⁄2" in 32nd and

64th increments.

To reduce risk of serious

injury, read this entire

manual BEFORE using

drill press tray. Read and

understand instructions/

safety warnings provided

by manufacturer for any

machine or tool you plan to

use with this tray.

Figure 1. Model T33682.

Inventory

Contents (Figure 2) Qty

A. Tool Tray ..................................................... 1

B. Z-Bar 1⁄2" ..................................................... 1

C. Z-Bar 3⁄8" ..................................................... 1

D. Key Hose Clamps 5" .................................. 2

E. Z-Bar Adapter ............................................. 1

F. Mounting Block ........................................... 1

Figure 2. Inventory.

A B

NO PORTION OF THIS MANUAL MAY BE REPRODUCED IN ANY SHAPE

OR FORM WITHOUT THE WRITTEN APPROVAL OF GRIZZLY INDUSTRIAL, INC.

(FOR MODELS MFD. SINCE 07/23) #JM22675 PRINTED IN CHINA V1.07.23

-2- Model T33682 (Mfd. Since 07/23)

Installation

Installing the Model T33682 consists of clamping

the mounting block to the drill press column, and

installing the Z-bars, adapter, and tool tray.

Figure 4. 1⁄2" Z-bar installed.

Mounting

Block

1⁄2" Z-Bar

6. Mount Z-bar adapter on 1⁄2" Z-bar

(see Figure 5).

Note: Z-bar adapter has one end drilled at 3⁄8"

and one end drilled at 1⁄2".

7. Mount 3⁄8" Z - b a r i n t o Z - b a r a d a p t e r

(see Figure 5).

8. Insert tool tray on top of 3⁄8" Z - b a r

(see Figure 5).

5. Mount 1⁄2" Z-bar into mounting block

(see Figure 4).

Figure 5. Drill press tray installed.

Tool Tray

3⁄8" Z-Bar

Z-Bar

Adapter

To install drill press tray:

1. Unscrew hose clamp key until band is free of

shroud, then repeat with second hose clamp.

2. Feed clamp bands through slots in mounting

block, then slide clamp bands underneath

drill press rack (see Figure 3).

Note: Do not position clamps over rack. They

will interfere with movement of drill press

column.

3. Position mounting block on drill press column

(see Figure 3).

Note: Position mounting block high enough

on column so it does not interfere with table

movement.

4. Insert clamp bands in shrouds and tighten

until snug (see Figure 3).

Figure 3. Mounting block attached on drill press

column.

Column

Rack

Key Hose

Clamps

(1 of 2)

Mounting

Block

Mounting

Block

Slot

(1 of 2)

Clamp

(1 of 2)

Autres manuels Grizzly Percer

Grizzly

Grizzly G5351 Manuel utilisateur

Grizzly

Grizzly G0760 Manuel utilisateur

Grizzly

Grizzly G0784 Manuel utilisateur

Grizzly

Grizzly G1005Z Manuel utilisateur

Grizzly

Grizzly G0619 Manuel utilisateur

Grizzly

Grizzly G7947 Manuel utilisateur

Grizzly

Grizzly G0485 Manuel utilisateur

Grizzly

Grizzly G7943 Manuel utilisateur

Grizzly

Grizzly G7947 Manuel utilisateur

Grizzly

Grizzly G0720R Manuel utilisateur

Grizzly

Grizzly G0643 Manuel utilisateur

Grizzly

Grizzly G0704 Manuel utilisateur

Grizzly

Grizzly G0795 Manuel utilisateur

Grizzly

Grizzly G3358 Manuel utilisateur

Grizzly

Grizzly T31739 Manuel utilisateur

Grizzly

Grizzly G0758 Manuel utilisateur

Grizzly

Grizzly G8597 Guide de démarrage rapide

Grizzly

Grizzly G1005Z Manuel utilisateur

Grizzly

Grizzly C1393-96 Manuel utilisateur

Grizzly

Grizzly H6139 Guide de démarrage rapide

Grizzly

Grizzly G0795Z Manuel utilisateur

Grizzly

Grizzly G1006 Manuel utilisateur

Grizzly

Grizzly G7942 Guide de démarrage rapide

Grizzly

Grizzly H0603 Manuel utilisateur

Manuels Percer populaires d'autres marques

Makita

Makita BDF456 Manuel utilisateur

Black & Decker

Black & Decker LDX220 Manuel utilisateur

Hitachi

Hitachi DH 40MA Manuel utilisateur

Challenge

Challenge JO Manuel de référence technique

Makita

Makita LXFD01 Manuel utilisateur

Festool

Festool T18+3 Manuel utilisateur

Milwaukee

Milwaukee M12 FPDX-202X Manuel utilisateur

EINHELL

EINHELL TE-RH 32 E Manuel utilisateur

Makita

Makita DHP484 Manuel utilisateur

Makita

Makita FD05 Manuel utilisateur

Bosch

Bosch PSB 530 RA Manuel utilisateur

Maximum

Maximum 054-1359-4 Manuel utilisateur

Makita

Makita HP332D Manuel utilisateur

Raider

Raider RDP-HD31H Manuel utilisateur

Bort

Bort BPM-1400x2 Manuel utilisateur

Black & Decker

Black & Decker 7266 Manuel utilisateur

KENT USA

KENT USA TRD1230 Manuel utilisateur

Bosch

Bosch GSB 19-2 RE Manuel utilisateur