Griffwerk smart2lock Manuel utilisateur
10 mm
OPENING DOORS
IMPORTANT INSTALLATION INSTRUCTIONS FOR SMARTLOCK
BEFORE INSTALLATION
1. Check the frame: The frame must not bulge in the vicinity of the striking plate.
This can be checked using a long spirit level or straightedge.
2. Checking the lockable grip: Check whether the lock opens and closes before installation.
ATTENTION! The square spindle must not be inserted into the handle for this.
3. Check the latch projection at the lock: 10 mm as standard, unchecked locks
often only have 8 mm.
Only valid for ONE door handles:
Adjust substructure so that it is parallel with the handle, if it is incorrectly adjusted.
INSTALLATION VIDEOS
Step by step guide in suitable installation video:
GRIFFWERK GMBH | LINDENSTR. | BLAUSTEIN | PHONE + | FAX + | INFOGRIFFWERK.DE
ONE door handles
>> VIDEO
Piatta S
>> VIDEO
Clip-on system
>> VIDEO
Screw-on system
>> VIDEO
-+
+
-
by GRIFFWERK
OPENING DOORS
GRIFFWERK GMBH | LINDENSTR. | BLAUSTEIN | PHONE + | FAX + | INFOGRIFFWERK.DE
DURING INSTALLATION
1. Drill support cams to 7 mm horizontally (not bigger)
For this purpose, we recommend the GRIFFWERK drilling template
2. Rebate gap max. 3.5 mm (door adjustment)
3. Tighten grub screws properly
by GRIFFWERK
7
7
38
90°
Table des matières
Autres manuels Griffwerk Serrure de porte
Griffwerk
Griffwerk FRAME 1.0 Guide de l'utilisateur
Griffwerk
Griffwerk PURISTO S 100691177 Manuel utilisateur
Griffwerk
Griffwerk SMART2LOCK 2.0 Manuel utilisateur
Griffwerk
Griffwerk SMART2LOCK 2.0 Manuel utilisateur
Griffwerk
Griffwerk STUDIO Manuel d'utilisation
Griffwerk
Griffwerk PURISTO S Manuel utilisateur
Griffwerk
Griffwerk SMART2LOCK PIATTA S Manuel utilisateur
Griffwerk
Griffwerk PURISTO S 100691177 Manuel utilisateur
