GREISINGER G 1690 Manuel utilisateur

Quick reference guide

G 1690

G 1690T

O2-Analyser / oxygen meter

Table of contents 
/ 20 B-H86.0.31.DK2-1.0 
Table of contents 
About this documentation......................................................4 
1 Foreword........................................................................................4 
2 Legal notices..................................................................................4 
3 Further information.........................................................................4 
Safety.......................................................................................5 
1 Explanation of safety symbols ........................................................5 
2 Foreseeable misuse .......................................................................5 
3 Safety instructions..........................................................................6 
4 Intended use...................................................................................6 
5 Qualified personnel.........................................................................7 
The device at a glance............................................................8 
1 G 1690 series.................................................................................8 
2 Display elements............................................................................8 
3 Operating elements........................................................................9 
Operation...............................................................................10 
1 Opening the configuration menu...................................................10 
2 Adjustment to the sensor signal....................................................12 
Measurement Basics.............................................................13 
1 Oxygen principles.........................................................................13 
1.1 Oxygen partial pressure and oxygen concentration ......................13 
1.2 Maximum operational depth (MOD)..............................................13 
Operation and maintenance.................................................14 
1 Operating and maintenance notices..............................................14 
2 Battery..........................................................................................14 
2.1 Battery indicator............................................................................14 
2.2 Changing battery..........................................................................14 
Error and system messages.................................................16 

Table of contents

B-H86.0.31.DK2-1.0 3 / 20

8 Disposal.................................................................................17

9 Technical data .......................................................................18

10 Service ...................................................................................20

10.1 Manufacturer................................................................................20

10.2 Accessories..................................................................................20

1 | About this documentation G 1690 / G 1690T

4 / 20 B-H86.0.31.DK2-1.0

1 About this documentation

1.1 Foreword

Read this document carefully and familiarise yourself with the operation of the product

before you use it.

Keep this document ready to hand and in the immediate vicinity of the product so that

it is available to the personnel/user for reference at all times in case of doubt.

The user must have carefully read and understood the operating manual before begin-

ning any work.

1.2 Legal notices

The liability and warranty of the manufacturer for damages and consequential damag-

es are voided with misuse, disregarding this document, disregarding safety notices,

assignment of inadequately qualified technical personnel and arbitrary modifications of

the product.

This document is entrusted to the recipient for personal use only.

Any transmission, duplication, translation into other languages or excerpts from this

operating manual require the consent of the manufacturer.

The manufacturer assumes no liability for print errors.

1.3 Further information

Software version of the product:

–V1.0 or later

For the exact product name, refer to the type plate on the rear side of the product.

NOTE

For information about the software version, press and hold the ON button for longer

than 5 seconds. The series is shown in the main display and the software version of

the product is shown in the secondary display.

G 1690 / G 1690T Safety | 2

B-H86.0.31.DK2-1.0 5 / 20

2 Safety

2.1 Explanation of safety symbols

DANGER

This symbol warns of imminent danger, which can result in death, severe bodily injury,

or severe property damage in case of non-observance.

CAUTION

This symbol warns of potential dangers or harmful situations, which can cause damage

to the device or to the environment in case of non-observance.

NOTE

This symbol indicates processes, which can have a direct influence on operation or

can trigger an unforeseen reaction in case of non-observance.

2.2 Foreseeable misuse

The fault-free function and operational safety of the product can only be guaranteed if

applicable safety precautions and the device-specific safety instructions for this docu-

ment are observed.

If these notices are disregarded, personal injury or death, as well as property damage

can occur.

DANGER

Incorrect area of application!

In order to prevent erratic behaviour of the product, personal injury and property

damage, the product must be used exclusively as described in the chapter Description

in the operating manual.

–Do not use in safety / emergency stop devices!

–The product is not suitable for underwater use (rebreather)!

–The product is not permitted as the sole measuring device for controlling sub-

mersible gas mixtures - The fundamental safety of the gas mixture must be en-

sured, for example, by calculating the pressure ratios during filling or by safe

membrane filter systems or comparison with safe references!

–The product is not suitable for use in explosion-prone areas!

–The product must not be used for diagnostic or other medical purposes on pa-

tients!

2 | Safety G 1690 / G 1690T

6 / 20 B-H86.0.31.DK2-1.0

–Not suitable for use with requirements on functional safety, e.g. SIL!

–This device only serves as supervision by the monitoring of essential or other for

the customer important systems. It must not be used instead of compulsory ap-

proval monitoring devices and it is not designed for that purpose. If this device is

used for the monitoring of such systems on its own, the manufacturer will not as-

sume liability for damages whatsoever

2.3 Safety instructions

DANGER

Use caution when handling oxygen at levels above 40 vol. % O2- high oxygen levels

can cause ignition of materials and explosion if not handled properly

NOTE

This device does not belong in children's hands!

DANGER

The sensor contains potassium hydroxide (GOEL 381 at G 1690..-MAX) or acid

(GOEL 370 at G 1690..-35).

Potassium hydroxide and acids cause chemical burns!

In case of leaking liquid, avoid contact at all costs!

In case of contact:

•with skin: wash off immediately with plenty of water for several minutes.

•with clothing: remove contaminated, soaked clothing immediately.

•with eyes: rinse under running water for several minutes, consult a doctor.

If swallowed:

•drink plenty of water immediately, do not induce vomiting!

•Consult a doctor.

2.4 Intended use

The device is to be used exclusively for measuring the oxygen concentration in gas

mixtures and air. The measurement is made at the sensor opening.

The device must be calibrated regularly (in fresh air =20.95% vol.-% O2) to obtain

accurate readings.

The G 1690T is also suitable for displaying the calculated maximum operating depth

(MOD) from the measured oxygen concentration.

G 1690 / G 1690T Safety | 2

B-H86.0.31.DK2-1.0 7 / 20

For the MOD display, only air and NITROX mixtures with an oxygen concentration be-

tween 20.9 ... 36.0 vol. % O2may be used as dry gases!

DANGER

For safe measurements, the function of the sensor and device must be checked

regularly:

- Regular calibration on ambient air (20.9 vol. % O2) in accordance with the instruc-

tions

- In the case of higher oxygen values, check the function with a known gas concentra-

tion, preferably in the area of the gas to be measured (e.g. pure oxygen, NITROX50

or similar, "bump test")

DANGER

The MOD function (calculated maximum operating depth for diving) is designed only

for use in recreational diving from 20.9 to 36.0 vol. % O2.

It does not replace necessary calculations and application of the rules for planning and

performing a safe dive according to NITROX training.

DANGER

The MOD function is not designed for depth calculation of gas mixtures other than

those mentioned above (no "tech-diving", NITROX50, TRIMIX, …).

Any use of the de-vice in this area requires appropriate training and additional safety

measures.

NOTE

The device is only intended for use within the region of the European Union (EU).

2.5 Qualified personnel

For commissioning, operation and maintenance, the relevant personnel must have

adequate knowledge of the measuring process and the significance of the measure-

ments. The instructions in this document must be understood, observed and followed.

In order to avoid any risks arising from interpretation of the measurements in the

concrete application, the user must have additional expertise. The user is solely liable

for damages/danger resulting from misinterpretation due to inadequate expertise.

3 | The device at a glance G 1690 / G 1690T

8 / 20 B-H86.0.31.DK2-1.0

3 The device at a glance

3.1 G 1690 series

LCD Display

Front view

device

Sensor in

protective cover

3.2 Display elements

Display

Battery indicator

Evaluation of the battery status

Unit display

Display of units or min*/max*/hold

Main display

Current measured value or value for

min*/max*/hold

Auxiliary display

G 1690: Measuring value while in min/max/hold

G 1690T: MOD-value with additional unit text

NOTE

* = min/max functions are not supported by G 1690T.

All functions described in this manual for min/max display are not available with

this device variant.

G 1690 / G 1690T The device at a glance | 3

B-H86.0.31.DK2-1.0 9 / 20

3.3 Operating elements

On / Off button

Press briefly

Switch on the device

Activate / deactivate lighting

Long press

Switch off the device

Reject changes in a menu

Up / Down button

Press briefly

Display of the min/max value

(not available on G 1690T)

Change value of the selected parameter

Long press

Reset the min/max value of the current measure-

ment (not available on G 1690T)

Both simultaneously

Rotate display, overhead display

Function button

Press briefly

Freeze measurement (Hold)

Return to measurement display

Call up next parameter

Long press, 2s

Open menu, frozen measurement is displayed

Close menu, changes are saved

Operating status device is in measured value display

device is in the min-, max- or hold display

device is in the configuration menu

4 | Operation G 1690 / G 1690T

10 / 20 B-H86.0.31.DK2-1.0

4 Operation

4.1 Opening the configuration menu

1. Press the Function button for 2 seconds to open the Configuration menu.

2. (ONF appears in the display. Release the Function button.

Parameter

Values

Meaning

__INP

Auxiliary display (only available at G 1690T)

No auxiliary display,

only display of the oxygen concentration in [vol. %]

80D

Auxiliary display:

maximum operational depth MOD in meter [m] sea

water (for explanation of MOD see #1).

80D

Auxiliary display:

maximum operational depth MOD in feet [ft] sea

water (for explanation of MOD see #1).

__P.ABS

Air pressureö

500 ... 1 100

Air pressure in [hPa] corresponds to [mbar]

(note explanation #2 )

__PO2

Max. Oxygen partial pressure (only available at G 1690T)

0.2 ... 1.6

Partial pressure in [bar]

(Observe extended notes #3 !!)

POFF

Shut-off time

OFF

No automatic shut-off

0:15, 0:30, 1:00,

4:00, 12:00

Automatic shut-off after a selected time in

hours:minutes, during which no buttons have been

pressed

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels GREISINGER Instrument de mesure

GREISINGER

GREISINGER G 1110 Manuel utilisateur

GREISINGER

GREISINGER G 1500 Manuel utilisateur

GREISINGER

GREISINGER GIA 2002 NS/DIF Series Manuel utilisateur

GREISINGER

GREISINGER GTH 175/Pt Series Manuel utilisateur

GREISINGER

GREISINGER GMH 5430 Manuel utilisateur

GREISINGER

GREISINGER GMH 3630 Manuel utilisateur

GREISINGER

GREISINGER GMK 210 Manuel utilisateur

GREISINGER

GREISINGER GMH 3451 Manuel utilisateur

GREISINGER

GREISINGER G1410 Manuel utilisateur

GREISINGER

GREISINGER BaleCheck 200 Manuel utilisateur

GREISINGER

GREISINGER GMH 3691 Manuel utilisateur

GREISINGER

GREISINGER GMH 3500 Series Manuel utilisateur

GREISINGER

GREISINGER GMH 3151 Manuel utilisateur

GREISINGER

GREISINGER GMH 3431 Manuel utilisateur

GREISINGER

GREISINGER GMH 3161-01 Manuel utilisateur

GREISINGER

GREISINGER G 1111 Manuel utilisateur

GREISINGER

GREISINGER GMH 3430 Manuel utilisateur

GREISINGER

GREISINGER GLMU 400 MP-UNI Manuel utilisateur

GREISINGER

GREISINGER G 1420 Manuel utilisateur

GREISINGER

GREISINGER GMI 15 plus Manuel utilisateur

GREISINGER

GREISINGER GMH3110 Manuel utilisateur

GREISINGER

GREISINGER GCO 100 Manuel utilisateur

GREISINGER

GREISINGER GOX 20 Manuel utilisateur

GREISINGER

GREISINGER GMH 3651 Manuel utilisateur

Manuels Instrument de mesure populaires d'autres marques

Suaoki

Suaoki D40 Manuel utilisateur

Elster

Elster BK-G1.6 Manuel utilisateur

Endress+Hauser

Endress+Hauser Deltabar FMD71 Manuel

Duratool

Duratool D03128 Manuel utilisateur

Vega

Vega VEGAPULS 65 Manuel utilisateur

Tonghui

Tonghui TH2618B Manuel utilisateur

Tenmars

Tenmars TM-801 Manuel utilisateur

MSR

MSR 145 Manuel utilisateur

TPS

TPS WP-82 Manuel utilisateur

ELMETRON

ELMETRON CP-511 Manuel utilisateur

PCB Piezotronics

PCB Piezotronics 003C30 Manuel utilisateur

Tenma

Tenma 72-10465 Manuel utilisateur

Endress+Hauser

Endress+Hauser Proline Promag 50 Caractéristiques techniques

Siemens

Siemens SITRANS F Coriolis FCT030 Manuel de la liste des pièces

KLINGER

KLINGER CMF V Series Manuel utilisateur

EXFO

EXFO FTB-2 Manuel d'exploitation et d'entretien

Keysight

Keysight M8290A Manuel utilisateur

ADTEK

ADTEK MW-5 Manuel utilisateur