greenPRO GPI-100 Manuel utilisateur
PROUDLY AUSTRALIAN
OWNED & OPERATED
GPI-100
SOLAR POWERED
TRAVELLING IRRIGATOR
MANUAL
ADDRESS
Greenpro Solutions Pty Ltd
9 Research Street
Coolum Beach
QLD 4573
PHONE
1800 768 748
ONLINE
info@greenpro.com.au
www.greenpro.com.au
READ THIS OPERATION MANUAL CAREFULLY BEFORE
ATTEMPTING TO OPERATE THE UNIT
No part of this manual may be reproduced without
written permission.
All information in this manual is based on the latest
product information available at the time of printing.
Greenpro Solutions Pty Ltd
GPI-100 Travelling Irrigator
Operations and Guidelines
Updated: May 2022
Original Instruction
All information, illustrations and specifications in this manual are based on the latest information at the time of publication.
The right is reserved to make changes at any time without notice.
COPYRIGHT© 2022
greenPRO
Greenpro Solutions Pty Ltd
All rights reserved
Previous Editions
COPYRIGHT© 2022
WARNING
On behalf of greenPRO we would like to thank you for
investing in the GPI-100 Solar Powered Travelling Irrigator.
Every greenPRO implement is manufactured to meet our
high Australian standards so that we can provide our owners
with the best product and service possible. Our aim is to
offer the right solutions to combat challenges so that you
can enjoy the lifestyle you’ve worked hard to create.
As an Australian owned business, your investment has
enabled our every success. Over 30 years combined active
involvement in this community has allowed our team to
provide solutions to combat challenges that Australian
farmers face in agriculture today.
We appreciate your patronage and hope you enjoy many years
of safe and satisfied use of your implement.
This manual should be considered a permanent part of your
greenPRO GPI-100 Solar Powered Travelling Irrigator and
stored in a safe place for future reference.
Welcome to where the grass is greener.
CONGRATULATIONS,
YOU’RE A PRO.
SECTION 1
System Overview
SECTION 2
Assembly
SECTION 3
OPERATING THE IRRIGATOR
- Control Lever + Speed Control
OPERATING THE IRRIGATOR
- Timer
OPERATING THE IRRIGATOR
- Towing the Sprinkler Head
SECTION 4
Spray Data
SECTION 5
Specifications
SECTION 6
R6 Impact Sprinkler
SECTION 7
Maintenance
SECTION 8
Trouble Shooting Guide
SECTION 9
Your Notes
1
3
5
6
7
9
10
11
12
13
15
TABLE OF
CONTENTS
GPI-100 TRAVELLING Irrigator
OPERATION MANUAL
SECTION 10
Warranty Policy
Warranty
Registration Form
Contact
16
20
21
1
GPI-100 TRAVELLING IRRIGATOR OPERATION MANUAL
1SYSTEM OVERVIEW
Spring
tensioned hose
retaining bar
20 watt solar
panel for
recharging of the
12 volt battery
Control lever for
locked transport
mode, hose
unwind mode.
Hose rewind
motor
Irrigator
stop/shut off
switch lever
Hose guide
follower
Coupling for
attaching sprinkler
assembler to hose
on reel
Turf claws
for securing
reel when in
operation
Sprinkler
head
Machine shut off
bar + sprinkler
trolley locking
hook for securing
sprinkler
assembly
Motor
handle
2
GPI-100 TRAVELLING IRRIGATOR OPERATION MANUAL
1SYSTEM OVERVIEW
Sprinkler water
ow cut-off valve
Hose reel
waterway shaft
brass plug
Motorised ball
valve for automatic
water shut off
Pressure
gauge for
water supply
pressure
12 volt Battery
35Ah
Sprinkler tow out
chain to pull hose
and sprinkler into
irrigation start
location
Tow
hitch
Rewind speed
control and timer
Drive chain
guard
3
GPI-100 TRAVELLING IRRIGATOR OPERATION MANUAL
2Assembly
Included with your GPI-100;
• 10 meters of 1.5 inch lay flat hose
• 1.5-inch Type C Poly Camlock fittings
• 1.5-inch Type A Poly Camlock fitting
for water supply connection.
Included in your kit.
• 2 x fuses
• 3 x sprinkler head nozzles and
solar/timer controller instructions
Note: For flow rate see page 9.
1
Connect hose from sprinkler trolley
to the irrigator and secure.
Note: Ensure the white compression
fitting is pushed against the hose
fitting and secure by tightening the
nut.
2 Sprinkler Trolley Assembly
4
GPI-100 TRAVELLING IRRIGATOR OPERATION MANUAL
2Assembly
3 Solar Panel Assembly
13mm (M8) Spanner / Socket
Chain Cover
Chain Tensioner Sprocket
17mm (M10) Spanner / Socket
Solar Panel Install
REQUIRED TOOLS:
Pliers / Grips
Swap Sprinkler Head Nozzles
4
Connect lay flat hose to water supply
and connect the other end to the male
Camlock waterway inlet on the reel.
Feed the connector under the
bracket and plug in the Deutsch
connector.
Fit the solar panel to the top of the
bar.
Secure with the two supplied bolts
as pictured.
3.1
3.2
3.3
5
GPI-100 TRAVELLING IRRIGATOR OPERATION MANUAL
1
Slowest recommended rewind time
during the day is 10 hours and 8
hours at night. Fastest recommended
rewind time is 1.5 hours.
Turn knob clockwise = ON for faster
rewind and turn anticlockwise =
slow/OFF.
Full clockwise rotation is maximum
rewind speed at 1.35 hours (All speed
times are with the hose extended to
the full 100 meters)
2
3CONTROL LEVER + SPEED CONTROL
operating the irrigator
Engage motor handle and lock
control lever in unwind position to
unwind the hose.
Disengage/release motor handle to
engage motor.
1.1
1.2
6
GPI-100 TRAVELLING IRRIGATOR OPERATION MANUAL
To set the clock press and hold the
clock key. While holding the clock key,
cycle through the day, hour & minute
keys until the current day & time is set.
Note: The clock display is in 24-hour
time.
setting the clock
1. 7 Days - Monday to Sunday
2. Mondays only
3. Tuesdays only
4. Wednesdays only
5. Thursdays only
6. Fridays only
7. Saturdays only
8. Sundays only
9. Weekdays only – Monday to Friday
To set a program press the timer
key and use the day key to cycle
through functions 1 – 15 until the
desired function is indicated on the
LCD display, thus indicating that the
timer program is set. To exit program
setup, press the clock key.
programs
Setting Programs
The TM619 digital timer offers 15 programmable functions to suit automatic
switching needs for a wide variety of applications. These functions are recurring
events every week on the days in which the programs are set to function.
10. Weekends only – Saturday & Sunday
11. 6 days – Monday to Saturday
12. 3 days – Monday, Tuesday, Wednesday
13. 3 days – Thursday, Friday, Saturday
14. 3 days (alternate) – Monday, Wednesday,
Friday
15. 3 days (alternate) – Tuesday, Thursday,
Saturday
To set the timer press the timer key
once. The LCD display will show (1on
--:--). Using the hour & minute keys, set
the desired ‘Switch ON’ time. To set the
‘Switch OFF’ time, press the timer key
again, the display will show (1off --:--
). Again, using the hour & minute keys,
set the desired ‘Switch OFF’ time. The
TM619 digital timer has capacity to allow
16 separate on/off timer settings each
day to suit any application, repeat steps
for each on off application. To exit timer
setup, press the clock key.
Setting the Timer
to replace
TIMER battery
Please follow
the below
3Timer
operating the irrigator
Note: The clock display is in 24-hour time.
Table des matières
Autres manuels greenPRO Système d'irrigation
Manuels Système d'irrigation populaires d'autres marques
Hunter
Hunter Institutional Series Manuel utilisateur
Cellfast
Cellfast 52-305 Manuel utilisateur
Tyco Fire Product
Tyco Fire Product Star Galaxy SGQR Manuel utilisateur
Tyco Fire Product
Tyco Fire Product CENTRAL A Manuel utilisateur
Oral Care Technologies
Oral Care Technologies Hydro Floss Manuel utilisateur
Reliable
Reliable F1-300 Manuel utilisateur
