Greenlee / A Textron Company 44455 Boeing Dr. • Rockford, IL 61109-2988 USA • 815-397-7070
GATOR®Battery-powered Cable Cutter
• Do not immerse batteries in water or any conduc-
tive liquid. If batteries are immersed, contact your
service center for proper handling.
• Never short between the battery terminals.
• Use only the manufacturer-supplied charger rated
for 12 volt nickel cadmium batteries.
• Do not disassemble or perform modifications to
the battery. (There are no user serviceable compo-
nents in the battery.) Failure to comply may result
in injury or damage to the battery from rapid
discharge of battery energy.
• Do not place battery into pocket or toolbox with
conductive objects (coins, keys, tools, etc.).
Failure to observe this precaution could result in
burn injury from rapid discharge of battery energy.
• A battery placed on its nose on damp ground or
grass may be damaged by an electrical short.
• Do not store batteries above 60°C/140°F for
extended periods. Battery damage may result.
Failure to observe these warnings may result in
personal injury or damage to the battery from rapid
discharge of battery energy.
Use all appropriate and applicable personal safety
equipment as required, such as: safety shoes, hard
hat, safety glasses, etc. Follow all safety rules and
regulations for the job.
Failure to comply may result in personal injury or
property damage.
IMPORTANT SAFETY INFORMATION
• Keep hands and fingers away
from closing blades.
• Lock trigger when not in use.
Do not dispose of batteries in a fire. They will vent
vapors and may explode.
Failure to observe this warning may result in injury
from inhalation of vapors or burns from flying debris.
• Do not cut steel or ACSR. Cut only copper and
aluminum cable.
• This tool is not designed for continuous use. After
30 – 40 cutting cycles, allow the cutter to cool for
15 minutes.
• Do not place tool in a vise. The cutter is designed
for hand-held operation.
• Keep water from inside of cutter. Water inside
cutter or battery may damage internal circuitry.
• Store tool in case when not in use.
Failure to observe these precautions could result in
injury and property damage.
Wear safety glasses when using
this cable cutter.
