Green-Box Technology KV-P01601 Manuel utilisateur
KV-P00801
KV-P01601
User Manual
◄V1.0 ►
www.green-box.com.tw
8/16-Port PS/2 KVM Switch
8/16-Port PS/2 KVM Switch
2 / 26
Certifications
FCC
This equipment has been tested and found to comply with Part 15 of the FCC
Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference
(2) This device must accept any interference received, including interference
that may cause undesired operation.
CE
This equipment is in compliance with the requirements of the following
regulations:
EN 55022: CLASS B
RoHS
All contents of this package, including products, packing materials and
documentation comply with RoHS.
© 2008 by Green-Box
Green-Box Technology Co. Ltd. reserves the right to make changes in the hardware, packaging, and any
accompanying documentation without prior written notice.
No part of this document may be reproduced or transmitted in any form or by any means, electronic, mechanical,
photocopying, recording, or otherwise, without prior written permission of Green-Box Technology Co. Ltd.
8/16-Port PS/2 KVM Switch
3 / 26
Contents
1. Product introduction .........................................................4
2. Product Feature ................................................................5
3. Specifications....................................................................6
4. Hardware Installation .......................................................8
5. Operation & Usage ..........................................................11
5.1 Set Password ...............................................................11
5.2 Activate OSD................................................................11
5.3 OSD Main Screen Headings ............................................12
5.4 OSD Status Indication ...................................................13
5.5 Edit Computer Name .....................................................13
5.6 Set Password ...............................................................14
5.7 Scan Setting ................................................................16
5.8 Hot-Key Setting............................................................17
5.9 OSD Rate / Scan Rate Setting.........................................18
6. Upgrade firmware ...........................................................20
7. Troubleshooting..............................................................25
8. Optional Accessories.......................................................25
9. Notice .............................................................................26
8/16-Port PS/2 KVM Switch
4 / 26
1. Product introduction
This PS/2 KVM (Keyboard, Video and Mouse) Switch allows multiple computers
(PCs or servers) controlled by one set of keyboard, monitor and mouse. It
ensures easy switch by front panel button, Hot-keys or the friendly On Screen
Display (OSD) menu with connection up to 128 computers (by chaining 16-port
PS/2 KVMs). Not only naming for each computer can be done for easy
identification, it also protects access by passwords. Additionally with the Auto
Scan function it helps you managing all connecting systems at ease.
Why use a PS/2 KVM Switch?
— Saves money, time, spaces and energy
1. Saves money – With only one set of keyboard, monitor and mouse you
can manage multiple systems. This greatly reduces the cost of
implementing hardware for each computer and system administrator to
handle the installation.
2. Saves time – Completely centralized control to save your time traveling
between every computer.
3. Saves space – As only one set of keyboard, monitor and mouse is
required to manage all computers, no need to worry about extra
spaces for each system. You may utilize the space for future use.
4. Saves energy – As number of keyboard, monitor and mouse is greatly
reduced, the electricity burden caused by each hardware is also
reduced..
Who should use the PS/2 KVM?
Anyone who owns two or more computers, who wishes to reduce cost and
control her system efficiently, PS/2 KVM can be the best solution. Following list
is some of the example where PS/2 KVM can be implemented.
1. SOHO, small to medium offices
2. Organization’s server management centre
3. Hardware/software experiment and system coalition
4. PC production quality test
5. Industrial rack application
6. Customer’s service centre
7. ISP (Internet Service Provider),ASP (Application Service Provider,
IDC(Internet Data Center).. etc. Global information system centre.
8/16-Port PS/2 KVM Switch
5 / 26
2. Product Feature
Software free, easy installation, fully plug-and-play design.
Compatible with typical PS/2 computers, monitors and keyboards.
Supports IntelliMouse, IntelliMouse Explorer, and Logitech Net Mouse…
etc.
Compatible using DOS, Win3.x, Win95/98/98SE/2000/ME/XP/Vista,
WinNT, Netware, HP Unix, Linux…etc.
If keyboard or mouse is using USB interface, please implement USB to
PS/2converter.
Supports Hot plug-and-play (if computer and operation system also
supports this feature)
Supports high resolution video at 1920 x 1440, with DDC2 monitor
compatibility.
Auto Scan function scans for all connecting computer at intervals
between 5~255 seconds.
Use power adaptor to provide electricity.
Front panel channel selection button and indication lights.
By daisy-chaining it can connect up to 64 computers (for all 8-port
PS/2 KVM connection) or 128 computers (for all 16-port PS/2 KVM
connection)
Separate naming for each computer for easy identification.
Provide password protection and operation level restriction.
19” rack mount kit for easy rack installation
Has CE, FCC and C-Tick Certifications
Exclusive port for daisy-chain connection
Firmware upgrade facility through RS-232 interface
Dual power input- When primary power connection fails, secondary
power automatically initiates to prevent unwanted device shutdown.
8/16-Port PS/2 KVM Switch
6 / 26
3. Specifications
Model No. 8PORT KVM 16PORT KVM
Computer port 8 16
Console Port 1 1
Firmware Upgrade Port 1 1
Daisy Chain Port 1 1
Computer Port Connector
(All Female Type)
HDDB 15-pin
Console Port Connector
(All Female Type)
PS/2 Keyboard mini Din 6-pin
PS/2 Mouse Mini Din 6-pin
Monitor VGA HDDB 15-pin
Firmware Upgrade Port
Connector (Male type) RS-232 DB 9-pin
Daisy Chain Port
(All Female Type)
PS/2 Keyboard Mini Din 6-pin
PS/2 Mouse Mini Din 6-pin
Monitor VGA HDDB 15-pin
PC Port Select Method Hot-Key
Push Button
OSD Menu
Port indication 3 digits
One digit indicates Bank
Two digits indicates active computer ports
Computer port LED Online indication and Power on indication
for each computer port.
SCAN LED 1
OSD Menu Yes
Auto Scan Interval 5 ~ 255 seconds
Keyboard Emulation PS/2
Mouse Emulation PS/2
8/16-Port PS/2 KVM Switch
7 / 26
Firmware Upgrade Port RS-232
Monitor resolution 1920X1440 /60Hz
DDC version DDC2
Daisy Chain MAX Level 8 levels maximum
Maximum connected
computers 120 128
Housing Metal 19”
1RU (Rack Mount
Unit)
Metal 19”
1RU (Rack Mount
Unit)
Power adaptor Dual Power Input)
DC 5V/1A *1
DC5V/1A* 1 (Redundancy)
Operating Temperature 0 ~ 70°C
Storage Temperature -20 ~ 85°C
Weight (gram) 1450g 1950g
Size (mm) (420)X(130)X(44) (420)X(130)X(44)
8/16-Port PS/2 KVM Switch
8 / 26
4. Hardware Installation
Prior to installation please switch off all computer and peripherals. Following
guide is using 8-port PS/2 KVM as example. Please note 16-port PS/2 KVM has
similar hardware installation.
Step 1
Please open the package carefully and take out all required accessories to
prepare fluent installation. The size of device is 19”. For installation on rack
please install the rack-mount kit. Please measure the suitable distance
between PS/2 KVM and computer, keyboard, monitor and mouse before
installation.
Step 2
Plug power adaptor into PS/2 KVM and power socket. You will hear one beep
and port-1 red LED Constant lids.
Step 3
Please connect HDDB 15-pin blue connector on monitor to console port on
PS/2 KVM as illustrated below:
8/16-Port PS/2 KVM Switch
9 / 26
Step 4
Please connect PS/2 Mini Din 6-pins purple connector on keyboard to console
port on PS/2 KVM as illustrated below:
Step 5
Please connect PS/2 Mini Din 6-pins green connector on mouse to console port
on PS/2 KVM as illustrated below:
Step 6
Please use KVM cable to connect computer and PS/2 KVM. Plug the end with
only one HDDB 15-pin to PS/2 KVM computer port, and the other end of the
cable with HDDB 15-pin and two PS/2 Mini Din 6-pin to back of computer.
Please use the above method to connect every computer to PS/2 KVM.
★ NOTE: One end of this cable only has one HDDB 15-pin connector, the
other end has three connectors- one HDDB 15-pin and two PS/2 Mini Din
6-pin.
Step 7
When above cable installation is complete, please re-check all cable is securely
fastened at correct socket. Recommend attach label for identification.
8/16-Port PS/2 KVM Switch
10 / 26
Step 8 Daisy Chain (optional)
If daisy chaining is needed please use the daisy chain cable included with
package.
★ NOTE: Please do not use other type of cable for daisy chaining PS/2 KVMs.
Ce manuel convient aux modèles suivants
1
Table des matières
Autres manuels Green-Box Technology Changer
