Gree XK55 Manuel utilisateur

Owner's Manual

Original Instructions

Wired Controller XK55

To Users

Thank you for selecting Gree’s product. Please read this instruction manual

carefully before installing and using the product, so as to master and correctly use the

product. In order to guide you to correctly install and use our product and achieve

expected operating effect, we hereby instruct as below:

(1) This appliance is not intended for use by persons (including children) with

reduced physical, sensory or mental capabilities, or lack of experience and

knowledge, unless they have been given supervision or instruction

concerning use of the appliance by a person responsibility for their safety.

Children should be supervised to ensure that they do not play with the

appliance.

(2) This instruction manual is a universal manual, some functions are only

applicable to particular product. All the illustrations and information in the

instruction manual are only for reference, and control interface should be

subject to actual operation.

(3) In order to make the product better, we will continuously conduct

improvement and innovation. We have the right to make necessary revision

to the product from time to time due to the reason of sales or production,

and reserve the right to revise the contents without further notice.

(4) For personal injury or property loss and damage caused by improper

operation such as improper installation and debugging, unnecessary

maintenance, violation of related national laws and rules and industrial

standard, and violation of this instruction manual, etc., we will bear no

liability.

Contents

1 Safety Notices (Please be sure to abide them) .................1

2 Operation Notices................................................................2

3 Display Instructions ............................................................3

3.1 Appearance and Display ......................................................... 3

3.2 Icons ....................................................................................... 4

4 Wired Controller Installation and Commissioning............6

4.1 Wired Controller Installation .................................................... 8

4.2 Commissioning ..................................................................... 14

5 Operation Instructions ......................................................25

5.1 Overview............................................................................... 25

5.2 Pages Description................................................................. 26

6 Special Functions ..............................................................35

6.1 Remote Shielding.................................................................. 35

6.2 Access Display...................................................................... 35

7 Error Display ......................................................................36

7.1 Table of Error Codes for Outdoor Unit ................................... 36

7.2 Table of Error Codes for Indoor Unit...................................... 39

7.3 Table of Debugging Codes .................................................... 41

7.4 Table of Status Codes ........................................................... 43

Wired Controller XK55

1 Safety Notices (Please be sure to abide them)

WARNING: If not abide them strictly, it may cause severe damage to the

unit or the people.

NOTE: If not abide them strictly, it may cause slight or medium damage to

the unit or the people.

This sign indicates that the items operation must be prohibited. Improper

operation may cause severe damage or death to people.

This sign indicates that the items must be observed. Improper operation

may cause damage to people or property.

WARNING!

This product can’t be installed at corrosive, inflammable or explosive

environment or the place with special requirements, such as kitchen. Otherwise,

it will affect the normal operation or shorten the service life of the unit, or even

cause fire hazard or serious injury. As for the above special places, please

adopt special air conditioner with anti-corrosive or anti-explosion function.

Wired Controller XK55

2 Operation Notices

The power supply for all indoor units must be unified.

Prohibit installing the wired controller at wet or sunshine places.

Do not knock, throw or frequently disassemble the wired controller.

Do not operate the wired controller with wet hands.

In one system network, you must set one indoor unit as the master indoor unit,

Other indoor units are slave indoor units.

The operation mode of the system is basing on that of master indoor unit.

Master indoor unit can switch to any modes, while slave unit can’t switch to the

mode that is conflicting with master indoor unit.

When master indoor unit changes mode which cause operation mode of slave

indoor unit conflicts with that of system, the operation mode of slave unit will

switch to the operate mode of system automatically.

When two wired controllers control one (or more) indoor unit(s), the address of

wired controller should be different.

Functions with “*” are optional for indoor units. If a function is not included in an

indoor unit, wired controller can’t set the function, or setting of this function is

invalid to the indoor unit.

Wired Controller XK55

3 Display Instructions

3.1 Appearance and Display

Fig 3.1 Appearance of wired controller

Wired Controller XK55

Table 3.1 Appearance description

No. Name Description

1 Remote control

signal receiver

It is used to receive the remote control signal.

2 LED indicator Red indicates unit off; white indicates unit on.

3 Temperature

adjustment

It is used to adjust the set temperature.

4 On/off It is used to switch the unit on or off.

5 Touch button Short-press this button to turn on/off the backlight; long-press for 5

seconds to reset the touch screen.

6 Mode It is used to switch the operation mode of the air conditioner.

7 Fan speed It is used to change the fan speed of the air conditioner.

8 Up & down swing It is used to turn on/off the up & down swing.

9 Menu It is used to enter the next page.

10 Temperature display It displays the set temperature.

11 Status It displays the time and the enabled functions.

3.2 Icons

Table 3.2 Icons in the status bar

Modes (The selectable modes are subject to the working indoor unit.)

Icon Meaning Icon Meaning

Auto*

Cooling

Drying

Fan only

Heating

Floor heating*

3D heating

Heat supply*

Wired Controller XK55

Functions, status

Icon Meaning Icon Meaning

Air exchange*

Access card removed

Filter cleaning

Malfunction

Auxiliary heating*

Light

Healthy*

Left & right swing

Absence

Mute

Power-off memory

Master indoor unit

Energy-saving

Shield

Subsidiary wired controller

Sleep

Timer

Up & down swing

X-fan

Group control

Save Defrosting

Wired Controller XK55

4 Wired Controller Installation and Commissioning

Unit: mm

Fig 4.1 Dimensions of wired controller

Autres manuels pour XK55

Table des matières

Autres manuels Gree Contrôleurs

Manuels Contrôleurs populaires d'autres marques

Digiplex

Digiplex DGP-848 Mode d'emploi

YASKAWA

YASKAWA SGM series Manuel utilisateur

Sinope

Sinope Calypso RM3500ZB Manuel utilisateur

Isimet

Isimet DLA Series Style 2 Manuel d'installation

LSIS

LSIS sv-ip5a Manuel utilisateur

Rockwell Automation

Rockwell Automation 1769-L31 Manuel utilisateur

Airflow

Airflow Uno hab Manuel utilisateur

ABB

ABB ACS580-01 drives Manuel utilisateur

Panasonic

Panasonic GM1 Series Manuel utilisateur

Emerson

Emerson SW93 Manuel utilisateur

AutoAqua

AutoAqua Smart ATO micro SATO-120P Manuel utilisateur

Panasonic

Panasonic FP? Positioning Unit RTEX Manuel utilisateur

Samson

Samson Type 5824 Manuel de service

Alpha IP

Alpha IP MIOB 21001 Manuel utilisateur

Siemens

Siemens OpenAir GMA 1 Series Manuel utilisateur

Surecom

Surecom SR-629 Manuel utilisateur

Fishman

Fishman TriplePlay Manuel utilisateur

Regulus

Regulus SRS1 T Manuel utilisateur