Graco Dyna-Star 26A938 Manuel utilisateur

Manual 3A7718A

Instructions/Parts

Dyna-Star®Pump

Air Motors

For use on Dyna-Star Air Motor piston pumps, which are used in grease transfer

applications. For professional use only.

Model 26A938, Series A, 7.5 in. Air Motor

Model 26A939, Series A, 6.0 in. Air Motor

See page 3 for model information, including maximum

working pressure and approvals.

Related Manuals

Important Safety Instructions

Read all warnings and instructions in this

manual and in your pump or package

manual before using the equipment. Save

all instructions.

Manual

(English) Description

3A7519 Dyna-Star 200:1 and Dyna-Star 120:1

Grease Pumps

2Manual 3A7718A

Contents

Related Manuals. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

Models . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

Warnings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

Component Identification . . . . . . . . . . . . . . . . . . . . . . 6

Grounding . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

Recycling and Disposal . . . . . . . . . . . . . . . . . . . . . . . 8

End of Product Life . . . . . . . . . . . . . . . . . . . . . . . 8

Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Repair . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

Preventive Maintenance Schedule . . . . . . . . . . 10

Pressure Relief Procedure . . . . . . . . . . . . . . . . . 10

Repair Air Valve . . . . . . . . . . . . . . . . . . . . . . . . . 10

Replace Complete Air Valve......................... 10

Replace Seals or Repair Air Valve. . . . . . . . . . . 11

Disassemble the Air Valve............................ 11

Reassemble the Air Valve ............................ 12

Replace Pilot Valves..................................... 12

Repair Air Motor . . . . . . . . . . . . . . . . . . . . . . . . . 13

Disassemble the Air Motor ........................... 13

Reassemble the Air Motor ............................ 13

Notes: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

Parts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

Kits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18

Air Motor Seal Kits . . . . . . . . . . . . . . . . . . . . . . . 18

Air Valve Parts . . . . . . . . . . . . . . . . . . . . . . . . . . 18

Air Valve Kits . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

Dimensions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

Technical Specifications . . . . . . . . . . . . . . . . . . . . . . 21

California Proposition 65 . . . . . . . . . . . . . . . . . . . . . 21

Graco Standard Warranty. . . . . . . . . . . . . . . . . . . . . 22

Models

Manual 3A7718A 3

Models

Check the motor’s identification plate (ID) for the 6-digit

part number.

*Not sale-able part numbers.

FIG. 1

Air Motor

Part Number

Replacement

Air Motor Part

Number Series

Stroke

(in.)

Piston Diameter

in. (mm)

Maximum Air Inlet Pressure

psi (MPa, bar)

26A938* 25T843 A 4.75 7.5 (191) 100 psi (0.7 MPa, 7.0 bar)

26A939* 25T844 A 4.75 6.0 (152) 100 psi (0.7 MPa, 7.0 bar)

Warnings

4Manual 3A7718A

Warnings

The following warnings are for the setup, use, grounding, maintenance, and repair of this equipment. The

exclamation point symbol alerts you to a general warning and the hazard symbols refer to procedure-specific risks.

When these symbols appear in the body of this manual or on warning labels, refer back to these Warnings.

Product-specific hazard symbols and warnings not covered in this section may appear throughout the body of this

manual where applicable.

WARNING

MOVING PARTS HAZARD

Moving parts can pinch, cut or amputate fingers and other body parts.

• Keep clear of moving parts.

• Do not operate equipment with protective guards or covers removed.

• Equipment can start without warning. Before checking, moving, or servicing equipment, follow the

Pressure Relief Procedure and disconnect all power sources.

FIRE AND EXPLOSION HAZARD

When flammable fluids are present in the work area, such as gasoline and windshield wiper fluid, be

aware that flammable fumes can ignite or explode. To help prevent fire and explosion:

• Use equipment only in well-ventilated area.

• Eliminate all ignition sources, such as cigarettes and portable electric lamps.

• Ground all equipment in the work area.

• Keep work area free of debris, including rags and spilled or open containers of solvent and gasoline.

• Do not plug or unplug power cords or turn lights on or off when flammable fumes are present.

• Use only grounded hoses.

•Stop operation immediately if static sparking occurs or you feel a shock.Do not use equipment until

you identify and correct the problem.

• Keep a working fire extinguisher in the work area.

Warnings

Manual 3A7718A 5

EQUIPMENT MISUSE HAZARD

Misuse can cause death or serious injury.

• Do not operate the unit when fatigued or under the influence of drugs or alcohol.

• Do not exceed the maximum working pressure or temperature rating of the lowest rated system

component. See Technical Specifications in all equipment manuals.

• Use fluids and solvents that are compatible with equipment wetted parts. See Technical

Specifications in all equipment manuals. Read fluid and solvent manufacturer’s warnings. For

complete information about your material, request Safety Data Sheets (SDSs) from distributor or

retailer.

• Turn off all equipment and follow the Pressure Relief Procedure when equipment is not in use.

• Check equipment daily. Repair or replace worn or damaged parts immediately with genuine

manufacturer’s replacement parts only.

• Do not alter or modify equipment. Alterations or modifications may void agency approvals and create

safety hazards.

• Make sure all equipment is rated and approved for the environment in which you are using it.

• Use equipment only for its intended purpose. Call your distributor for information.

• Route hoses and cables away from traffic areas, sharp edges, moving parts, and hot surfaces.

• Do not kink or over bend hoses or use hoses to pull equipment.

• Keep children and animals away from work area.

• Comply with all applicable safety regulations.

PERSONAL PROTECTIVE EQUIPMENT

Wear appropriate protective equipment when in the work area to help prevent serious injury, including

eye injury, hearing loss, inhalation of toxic fumes, and burns. Protective equipment includes but is not

limited to:

• Protective eyewear, and hearing protection.

• Respirators, protective clothing, and gloves as recommended by the fluid and solvent manufacturer.

WARNING

Component Identification

6Manual 3A7718A

Component Identification

Key:

Air Motor Kit Components

A Air valve

B Pilot valve (bottom pilot valve is out of view)

C Top cover

D Bottom cover

E Manifold

F Ground screw

Lift Ring, Shrouds, and fittings

G Air inlet, 1/2 in. npt(f)

H Air outlet 3/4 in. npt

J Lift ring

FIG. 2: Typical Installation

Component Identification

Manual 3A7718A 7

Grounding

Air Motor: use ground wire and clamp (Graco P/N

222011, not supplied), as shown in FIG. 1.

1. Connect the ground wire (Y) to the ground screw (Z)

located on the bottom of the air motor.

2. Connect the other end of the ground wire (Y) to a

true earth ground.

The equipment must be grounded to reduce the risk

of static sparking. Static sparking can cause fumes to

ignite or explode. Grounding provides an escape wire

for the electric current.

FIG. 3

Recycling and Disposal

8Manual 3A7718A

Recycling and Disposal

End of Product Life

At the end of a product’s useful life, recycle it in a

responsible manner.

Troubleshooting

Manual 3A7718A 9

Troubleshooting

1. Relieve pressure before checking or servicing the

equipment, following the pressure relief procedure

for your system.

NOTE: Check all possible problems and causes before

disassembling the air motor.

Problem Cause Solution

Air motor will not run. Damaged air valve (17). Replace or service air valve (17),

see page 18.

Damaged pilot valve (19). Replace pilot valves (19), see page

12.

Air continuously exhausting around

air motor piston rod.

Damaged u-cups (3, 33) Replace piston rod u-cups (3, 33),

see page 13.

Air continuously exhausting muffler. Damaged air valve plate (105) or

cup (112)

Replace or service air valve (17),

see page 10.

Damaged piston o-rings (8) Replace the seals, see page 13.

Air motor “bounces” at top of

stroke.

Damaged bottom pilot valve. Replace bottom pilot valve (19),

see page 12.

Air motor “bounces” at bottom of

stroke.

Damaged top pilot valve. Replace top pilot valve (19), see

page 12.

Icing inside the motor. Air motor is operating at high

pressure or high cycle rate.

Reduce pressure, cycle rate, or

duty cycle of motor.

Reduce the dew point of

compressed air by using a moisture

coalescing filter.

Repair

10 Manual 3A7718A

Repair

Preventive Maintenance

Schedule

The operating conditions of the system determine how

often maintenance is required. Establish a preventative

maintenance schedule by keeping a record of when and

what type of maintenance is needed, and then

determine a regular schedule for checking the system.

Pressure Relief Procedure

1. Turn off the air supply to the pump.

2. Close the bleed-type master valve (required).

3. Open the fluid ball valve and/or dispensing valve to

relieve fluid pressure.

Repair Air Valve

Refer to Parts, on page 16 for this section.

Replace Complete Air Valve

1. Stop the pump in the middle of its stroke. Follow

Pressure Relief Procedure, page 10.

2. Disconnect the air lines.

3. Remove screws (18), see Parts, page 16.

4. Remove the air valve (17) and gasket (16).

5. To repair the air valve, start at Disassemble the Air

Valve, page 11, step 1. To install a replacement

valve, continue to step 6.

6. Lubricate and align the new air valve gasket (16) on

the manifold.

7. Lubricate the air valve plate (105), then attach the

air valve (17) (torque 95 - 105 in-lb/10.7 - 11.9 N•m).

• Trapped air can cause the pump to cycle

unexpectedly, which could result in serious injury

from moving parts,

• Relieve pressure when stopping the pump and

before cleaning, checking, or servicing equipment.

• Do not lift or move the motor while pressurized.

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Graco Pompe à eau

Graco

Graco Dura-Flo 2400 Fiche technique

Graco

Graco Modu-Flo AL-5M Manuel utilisateur

Graco

Graco Husky 2200 Manuel d'utilisation et d'entretien

Graco

Graco SaniForce 3250 Mode d’emploi

Graco

Graco Husky 307 F Series Manuel d'utilisation

Graco

Graco Viscount High-Flo Plus 25E933 Manuel d'utilisation

Graco

Graco metric Dura-Flo 900 Manuel d'utilisation

Graco

Graco Huskyt 2150 Manuel d'utilisation

Graco

Graco GlasCraft Guardian A Series Manuel d'utilisation et d'entretien

Graco

Graco Merkur W10CAS Manuel utilisateur

Graco

Graco Dura-Flo 1800 Manuel de la liste des pièces

Graco

Graco Husky 715 Manuel utilisateur

Graco

Graco G3 Series Manuel utilisateur

Graco

Graco Dyna-Star HP Manuel utilisateur

Graco

Graco Husky 2200 Manuel d'utilisation et d'entretien

Graco

Graco G-Chem Series Manuel de la liste des pièces

Graco

Graco fire-ball 425 Manuel d'utilisation

Graco

Graco Series A Manuel d'utilisation

Graco

Graco 258771 Manuel d'utilisation et d'entretien

Graco

Graco 24H689 Manuel utilisateur

Graco

Graco 5:1 Monark 952-793 Manuel d'utilisation

Graco

Graco 306287 Manuel d'utilisation

Graco

Graco Check-Mate P05LCS Manuel de la liste des pièces

Graco

Graco Dura-Flo Manuel d'utilisation

Manuels Pompe à eau populaires d'autres marques

Neptun

Neptun NPHW 5500 Manuel utilisateur

Sensidyne

Sensidyne Gilian BDX-II Instructions d'installation et d'utilisation

Draper

Draper 47808 Manuel utilisateur

Trolla

Trolla 12820 Manuel utilisateur

Sunfab

Sunfab SVH Series Manuel utilisateur

WilTec

WilTec 50740 Manuel utilisateur

Fieldmann

Fieldmann FVC 5015 EK Manuel utilisateur

Everbilt

Everbilt EFSUB5-122HD Manuel utilisateur

esotec

esotec 101018 Manuel utilisateur

moyno

moyno 2000 CC Manuel utilisateur

Becker

Becker BASIC VASF 2.80/1-0.AC230 Manuel utilisateur

Sykes AmeriPumps

Sykes AmeriPumps GP100M Guide de dépannage

DUROMAX

DUROMAX XP WX Series Manuel utilisateur

BRINKMANN PUMPS

BRINKMANN PUMPS SBF550 Manuel utilisateur

Franklin Electric

Franklin Electric IPS Manuel utilisateur

Xylem

Xylem e-1532 Series Manuel utilisateur

Milton Roy

Milton Roy PRIMEROYAL Manuel utilisateur

STA-RITE

STA-RITE ST33APP Manuel utilisateur