GPX TPD427 Manuel utilisateur
42”Tripod
User’s Guide for Model TPD427 v1729-01
Features
• Flip-lock legs
• Pan and tilt head
• 1/4” mount
• 4-section extendable legs
• Max height: 42”
• Storage height: 14”
• Max load weight: 1.1lbs (17.6 oz/500g)
Includes
• Carry Pouch
• User’s Guide
Center Column Lock
Pan Lock
Pan Bar & Tilt Lock
Legs/Flip Lock Levers
Rubber Feet
Camera Attachment Lock
Mount Angle Lock
Camera Mount & Level
Customer Support
For Warranty Information, the most up-to-date version
of this User’s Guide or to download this User’s Guide in
English, French or Spanish, please go to:
www.gpx.com
Customer Service: 1-888-999-4215
Copyright © 2016 Digital Products International (DPI,
Inc.) All other trademarks appearing herein are the
property of their respective owners. Specications are
subject to change without notice.
Protect for Today
Sustain for Tomorrow
Made
Green
Warnings & Procedures
• Do not exceed the maximum specied load
capacity.
• Always ensure that the leg and head locks are
tightly engaged before mounting any gear to
your tripod.
• Do not use tripod below -4°F/-20°C or above
158°F/70°C.
• Do not leave tripod in direct sun for extended
periods.
• Clean with damp cloth and dry with dry cloth.
If needed a mild soapy solution may be used to
remove built up dirt, sand, dust and the like.
• Do not leave tripod unattended where others
might trip over it and get injured.
• Remove camera and gear when transporting.
• Avoid contact with electrical sources.
• WARNING: This product may contain chemicals
known to the State of California to cause birth
defects, or other reproductive harm (California
Prop 65). Wash hands after handling.
• This product meets and complies with all
Federal regulations.
Operation
• Before using the tripod, adjust each leg to the
desired height and angle, then lock each section
securely. It is best to use the tripod on a at,
level surface.
• Attach your camera to the mount using the
thumbscrew on the underside of the mount.
Screw the locking stud into your camera, making
sure to correctly align the locking button with
the socket on your camera. Do not overtighten
the stud or damage may occur.
• It is best to remove the camera and any attached
equipment before making adjustments to the
tripod height or position.
• Be careful not to overload the tripod, as this
may negatively aect the center of gravity and
overall stability.
Autres manuels GPX Accessoires pour appareils photo
