GPRINTER GP-80160 Manuel utilisateur
Wireless printer Installation Guide
1. Connect the Printer to the power and power on the Printer
2. USB driver installation: Install Driver Installer.exe, and restart PC.
3. Plug the USB Dongle into the Computer USB socket; “Prolific
USB-to-Serial COMM Port” will pop up at the right and bottom edge of the
PC monitor.
4. Install the Printer Driver.
During installing the printer driver, when reaching below diagram step, keep all
data as showing in the diagram.
5. Restart the Computer
6. Select “My Computer”, and click the right button of Mouse, select
“properties/hardware/device manager/ports (Com & LPT)”; click “Ports
(COM & LPT), find “Prolific USB-to-Serial COMM Port (COM?)”, “COM?” is
the COM Port of the USB Dongle.
7. Double click “Control Panel”, select “Printer”, click the right button of Mouse,
and click “Open”. Select “GP-80160”, click the right button of the mouse,
select “properties/Ports (configure the COM Port, it should be the same as
the COM Port of the USB Dongle)/Configure (Data should be as below
window showing)
Default baudrate 76mm&80mm series as 19200bps, 58mm series as
9600bps.
Hardware No
And click “OK”.
8. Click “Print test page” to make a printing test.
Table des matières
Autres manuels GPRINTER Imprimante
GPRINTER
GPRINTER GP-8300TC Manuel utilisateur
GPRINTER
GPRINTER A831 Manuel
GPRINTER
GPRINTER BABY380 Manuel utilisateur
GPRINTER
GPRINTER GP-1524D Instructions d'utilisation et d'entretien
GPRINTER
GPRINTER Pro5 Manuel utilisateur
GPRINTER
GPRINTER GP-H80300I Manuel utilisateur
GPRINTER
GPRINTER GP-1124D Manuel d'instructions
GPRINTER
GPRINTER GP-2120T Manuel utilisateur
GPRINTER
GPRINTER GP-80160IVN Manuel utilisateur
GPRINTER
GPRINTER GP-80250IIIN Manuel utilisateur
