GP GONPED Manuel utilisateur
OWNER'S MANUAL 2022
GONPED E-BIKES
GONPED E-BIKE OWNER’S MANUAL
Introduction
Thank you for purchasing an GONPED E-BIKE .We believe this technology, with the benefits of electric
propulsion,provides you with the perfect vehicle to increase your mobility,extend your normal rides, and best of all,
increase your fun!
Firstly ,please take the time to read through and understand the instructions. We highly recommend you seek the
assistance of your local bike shop with assembly.
The E-BIKES are designed for all-terrian riding but also for regular on-road riding. Please do obey all laws and regulations
regarding Electric Assisted Bicycles and/or Motorized Vehicle regulations and their usage in your area. PURSUIT
recommends you to ware a helmet during riding this electric bike.
This Owner's Manual provides important information regarding the assembly, riding, and maintenance of this bike, please
make sure reading it before you take the bike out for the first ride.
Page 1
Warnings on Safety
You need to practice riding electric bikes, it can be dangerous to ride. The user or consumer assumes all risk of personal
injuries, damage, or failure of the bicycle or system and all other losses or damages to themselves and others and to any
property arising as a result of using the bicycle. There are risks related to the use of an electric bicycle which cannot be
predicted or avoided, and which are the sole responsibility of the rider. As with all mechanical components, the bicycle is
subjected to wear and high stresses. Different materials and components may react to wear or stress fatigue in different
ways. If the design life of a component has been exceeded, it may suddenly fail possibly causing injuries to the rider. Any
form of crack, scratches or change of coloring in highly stressed areas indicate that the life of the component has been
reached and it should be replaced. For replacement parts, technical information and warranty assistance, please contact
us.
PLEASE DO NOT DISASSEMBLE THE ELECTRONIC COMPONENTS IN ANY CASE !
Page 2
General Warnings
IMPORTANT INFORMATION BEFORE YOUR FIRST RIDE
BATTERY
Fully charge the batteries prior to the first ride. Remove the battery before attempting to service, making
adjustments or performing any maintenance on this electric bike. Removing the battery will help ensure
the motor is not started inadvertently while service or maintenance is being performed. See Page 12 for
battery removal instructions. The battery should be removed anytime the bike is stored or is left
unattended to prevent unauthorized use or accidental engagement of the motor. Keep out of reach of
children. Failure to remove the battery may result in serious injury or death.
Do not use a broken battery because its attery acid is highly corrosive and can cause serious burns if it
comes in contact with your eyes or skin. Please turn to a doctor for medical assist if this occurs.
You may charge your dual batteries at the same time or separately, make sure the battery (batteries) is (are)
fully charged before your first ride. Watch out for the electric shock when attempting to plug the charger plug.
Page 3
Gerneral Warnings
Brakes application
During your ride, the excess force on the front brake, can cause you to lose balance and fall. This is an
electric bike, it shares the same mechanic features with non-electric bikes. Pursuit E-bikes recommends a
mild start and also avoid harsh braking.
The Pursuit E-bikes comes equipped with hydraulic disc brakes. These brakes are different from other general
types of brakes associated with bikes. Disc brakes squeeze a hub-mounted disk between two pads. Stopping
power on your bike can vary depending on adjustments and pad thickness and wear. Consult your local bike shop
about brake options and adjustments according to your specific needs.
Disc brakes come with sharp edges that can cut you, make sure you or any other people take extra
caution when touching it if they have to. Also they can because extremely hot after using, DO NOT touch it
until it cooled down.
More Brake Warnings
Disc brakes have varying amounts of braking power depending on adjustments and pads conditions. Excessive
or sudden application of the front brake could pitch the rider over the handlebars which may result in serious injury
or death.
Check the braking system, and make sure it functions properly before the first ride. Pursuit E-bikes has examined
every single bike before packing, but the transportation could bring potential damage to the brakes, check it before
each ride. Page 4
Gerneral Warnings
TRANSPORTATION OF PURSUIT E-BIKES
- Always remove battery (batteries) from bike before transporting the bike
- Never lay your bike on the chain side, use the kick stand or lay it to any strong vertical object that is
enough to support the bike to stand.
INSPECTION BEFORE EACH RIDE
Before each ride, make sure you go through the check list to ensure a safe ride. Never ride a bike with damages
or deffects, get it repaired or turn to local bike shops for repair.
Tire inflation
Make sure to check tire pressures using a tire pressure gauge. The tires should be set between
7psi and 15 psi.
Tires and Wheels
1.Spin each wheel and check that the tires are in good shape with no cuts or abrasions. If these are found,
replace the tire immediately.
2.Inspect the rim for trueness by spinning it and watching for any side-to-side or up-and-down wobble. If any
movement is noted do not ride this bike until the rim is repaired.
Page 5
Gerneral Warnings
Handlebar stem and front wheel
Make sure the front wheel and handlebar stem are aligned in the proper orientation of each other. Turn the handlebar from
side to side with the front wheel locked between your knees to test the stem connection of the fork. If any movement is noted
do not ride the bike until this is corrected. Inspect cable routing to be sure the handlebars can turn freely without binding or
pinching the cables. Check to be sure that your handgrips on the handlebars are in good condition and the bars are not
protruding through the grip.
Seat Position
The saddle should be adjusted for proper fit and is an important factor in riding safely. Place your pedals in the 6 o’clock and
12 o’clock position. Your bottom leg should be very slightly bent when the ball of your foot is placed on the lower pedal. If
it’s bent too much you need to raise the saddle. If you have to rock your hips to reach or can’t easily reach, you must lower
the saddle. Ensure that the saddle is straight and level.
Seat and seat post
Check that the seat is securely mounted on the seat post by lifting up and down on the seat. This should not tilt or move. Next,
check the security of the seat post in the frame by attempting to rotate the seat. If the seat rotates, then the seat tube is not
properly clamped into the frame.
Respect local regulations and rules / Private Property
Remember each area in which you may ride your bike may have specific regulations.
Always respect private property and never trespass. Respect the rights of others with
whom may be sharing the trail with you; ie: hikers, cyclists, equestrians. Stay on your
designated trail and do not destroy vegetation and minimize your impact on the
environment. If you are unsure of your local laws or regulations please
contact your local conversation officer before riding on designated wildlife areas.
Page 6
Gerneral Warnings
An electric bike like any mechanical device is subject to fatigue, stress
and wear. Over time and due to use, the frame and its components can
fail. The environment and type of riding the bike is subjected to can
greatly reduce its useful lifespan. If proper care and maintenance are not
performed your bike and or its components can fail causing serious injury
or death.
Page 7
Thunder
Page 10
Unbox and Assembly
Pursuit E-bikes recommends that all the ebike be assembled, inspected and adjusted by a professional ebike
mechanic or ebike shop before riding. For more information on assembly, check out our assembly and maintenance
videos at www.jacsebikes.com
2-Remove all bubble wrap and
other packaging materials and
place them back in the box
1. You will need :6mm Hex key
1-Pls remove the bike from the box
carefully.
a. Remove the front wheel and
front fork,and pedal and charger
from the box first.
b. Take out all the rest parts of your
ebike from the box.
3.Attach the front wheel
a. Place the axle into the Barrel
shaft of the dropouts on the front
fork.
b.Tighten the nut on the left and
right side.
Page 12
Table des matières
Manuels Scooter populaires d'autres marques
First Choice Mobility
First Choice Mobility Roma Medical Corella S741 Manuel utilisateur
Carrera
Carrera impel Manuel utilisateur
Afikim
Afikim Superlight SL-3 Manuel utilisateur
CareCo
CareCo ZOOM Manuel utilisateur
Douglas
Douglas Vespa G.S. Manuel utilisateur
Gazelle
Gazelle with BOSCH System Manuel utilisateur