Gotie GBV-800 Manuel utilisateur
GBV-800
12
34
1
5
6
7
8
2
9
10 11
12 13
3
14
15
16
4
INSTRUCTION MANUAL - EN
SPECIFICATION
– power: 800W
– nominal voltage: 230V ~ 50 Hz
– ma continuous operating time: 3 minutes
– BPA free
PRODUCTS FEATURES
Traditional blenders allow a lot of air to mi in with the ingredients during
blending, food can become o idized. On the other hand, vacuum blenders
can retard the o idization by controlling incipient o idization through
vacuumization before blending. In addition, this blender can maintain the
freshness of previously processed/blended food that has been vacuum
stored, retarding o idization, using its vacuum storing function. (However,
such foods stored in a refrigerator should be consumed at the earliest
possible opportunity because vacuum storage itself does not inhibit the
growth of bacteria.)
SAFETY NOTES
Please carefull read the manual before use, and please use the
machine according to the instruction book. Be sure not to use the product
for other purposes.
1. Read these instructions carefully and retain for future reference.
2. Remove all packaging and any labels.
3. Take care the blades are very sharp.
4. Do not use the vacuum blender more than 3 minutes.
5. The blades are very sharp, handle with care. Always hold the plastic
parts rather than the cutting edge when handling and cleaning (pic. 1).
6. Keep hands and utensils away from the blade while blending to reduce
the risk of severe injury to persons or damage to the vacuum blender.
7. This appliance will be damaged and may cause injury if the interlock
mechanism is subjected to e cessive force.
5
Warning: The product is applicable to famil use, and it is
inapplicable to commercial use, otherwise its service life ma
be shortened. Don't use the unit if the filter damaged.
8. Before removing the blending jar: switch off first, wait until the blades
have completely stopped.
9. Do not operate any appliance with a damaged cord or plug or after the
appliance malfunctions, or is dropped or damaged in any manner. Return
appliance to the nearest authorized service facility for e amination, repair
or electrical or mechanical adjustment.
10. Never let the power unit, cord or plug get wet.
11.Don’t let e cess cord hang over the edge of a table or worktop or
touch hot surfaces.
12. Never leave the appliance on unattended.
13. Misuse of your vacuum blender can result in injury.
14. Never use an unauthorized attachment.
15. This appliance is not intended for use by persons (including children)
with reduced physical, sensory or mental capabilities, or lack of
e perience and knowledge, unless they have been given supervision or
instruction concerning use of the appliance by a person responsible for
their safety.
16. Children should be supervised to ensure that they do not play with the
appliance.
17. Do not use outdoor, household use only. Supplier will not accept any
liability if the appliance is subject to improper use, or failure to comply
with these instructions.
18. To protect against risk of electrical shock do not put power unit in
water or other liquid, Close supervision is necessary when any appliance is
used by or near children.
19. Unplug from outlet when not in use, before putting on or taking off
parts, and before cleaning.
20. Avoid contacting moving parts.
21. The use of attachments not recommended or sold by the
manufacturer may cause fire, electric shock or injury, or discs on base
without first putting bowl properly in place.
22. Do not attempt to defeat the interlock mechanism.
23. Blade is sharp. Handle carefully.
24. Be certain machine is installed properly before operating appliance.
25. Do not modify the plug in any way.
26. Please do not move the unit during operation.
27. Please do not use the unit at a place that is unstable.
28. Please do not put ingredients of a temperature higher than 40°C into
6
the jars. Doing so may cause injury (pic. 2).
29. Never perform no-load running. Please do not use the unit with
ingredients less than 250ml or e ceed Ma line.
Before plugging in make sure our electricit suppl is the same
as the rating label one that shown on the underside of the
appliance.
SAVE THESE INSTRUCTIONS
ELEMENTS
Blender parts (pic. 3) Blending Jar (pic. 4) Vacuum storage (pic. 5)
1. Vacuum valve 1. Vacuum valve 1. Vacuum valve
2. Upper cover 2. Blending jar lid 2. Storage jar lid
3. Blending jar lid 3. Blending jar lid pad 3. Lid filter
4. Blending jar 4. Lid filter 4. Storage jar seal
5. Main body 5. Blending jar lid seal 5. Vacuum storage jar
6. Power button 6. Blending jar
7. AUTO button 7. Blade base seal
8. VACUUM button 8. Blade set
9. Speed indicator
10. Speed knob
11. Food pad
Pictures are for reference onl
ASSEMBLY OF BLENDING JAR
1. Assemble lid (pic 4).
2. Install vacuum valve and blending jar lid pad to blending jar lid first (pic.
6).
3. Install blending jar seal to blending jar lid (pic. 7).
7
4. Install lid filter b rotate clockwise (pic. 8).
5. Press blending jar lid down to blending jar b aligning lid tip with jar
spout (pic. 9)
6. Assemble blade set b rotate blade set anti-clockwise and install it to
blending jar (pic. 10). To disassemble the balde see picture 11.
ASSEMBLY OF VACUUM STORE JAR
1. Install vacuum valve and storage jar seal to vacuum storage jar.
2. Then install lid filter b rotate clockwise (pic. 8).
3. Press storage jar lid down to vacuum storage jar.
ASSEMBLY OF COMPLETE MACHINE
To assemble the machine follow picture 14 and 15.
FUNCTION DESCRIPTION
To use our vacuum blender connect plug to power supply and all
indicator lights flash for once, then press Power button, the indicator light
around power button goes on, you can start to use now.
For vacuum:
Install vacuum storage jar in place (pic. 15) or install into the machine
vacuum storage jar.
The vacuum blender has a separate vacuum function, programmed to
vacuum the blending jar or vacuum storage jar. Press VACUUM button and
wait 45 seconds until the indicator light goes out.
NOTE: When VACUUM program is running, press AUTO button or adjust
Speed knob manually will be useless.
Vacuum function can be stopped b pressing VACUUM button
again.
For blending:
Install blending jar as picture 15.
1. AUTO function
One click function is an auto feature the vacuum blender has.
8
First press power button, then just one click the AUTO button, vacuum
and blending will be automatically operated with a program of 45 seconds
vacuum and 1 minute’s blending, to be ready to enjoy your smoothie.
NOTE: When AUTO program is running, adjust speed knob
manuall will be useless. Auto function can be stopped b
clicking AUTO button again.
2. Manual function
When you want to blend or grind at your preferred timescale, you can
operate the vacuum blender in a manual way.
1) Press VACUUM button and wait 45 seconds until the indicator light goes
out.
2) Rotate the speed knob anticlockwise and release soon to proceed with
PULSE motion.
3) Dial the speed knob clockwise to adjust speed.
NOTE: When machine is running at a selected speed, press AUTO
button will be useless.
The machine will stop working automaticall up to 3 minutes to
ensure user’s safet , but in an condition, do not run it over 3
minutes continuousl , and please cool it for 30 minutes.
DISASSEMBLY METHOD
Alwa s release vacuum completel first before opening Upper
cover, blending jar lid and storage jar lid, otherwise ou can not
open them.
Disassembe vacuum storage jar:
1. If vacuum funtion has been used, relase vacuum to open upper cover.
2. Take vacuum storage jar out to store in refrigerator or take away. When
you want to open lid, if vacuum funtion has been used, relase vacuum
first.
Disassembe Blending jar:
1. If vacuum funtion has been used, relase vacuum to open upper cover.
2. Rotate blending jar anti-clockwise to take it out (pic. 8).
9
Table des matières
Langues :
