Gooloo GT160 Manuel utilisateur
Reg No.
5904374
R
Model : GT160
SUPERSAFE is a safety protection technology by GOOLOO
Reg No.
5904374
160PSI
Air Inflator
CONTENTS
WELCOME
PRODUCT OVERVIEW & PACKAGE
BATTERY LEVEL INDICATOR & CHARGING
STEPS TO USE THE AIR INFLATOR
TECHNICAL SPECIFICATION
FAQ
WARNING
WARRANTY AND SUPPORT
ATTENTION
CUSTOMER SERVICE
01
02
03
04
06
07
09
12
13
14
Thank you for choosing GOOLOO Air Inflator. To ensure a good user experience, personal
safety, and property security, please read all of the instructions carefully before using this
product, please keep this manual for reference.
Charge It First !
While reading through the manual, you can start to charge your GT160 with the wall charger
and type-c cable provided.
WELCOME
1
2
Pressure increase
Pressure decrease
Aerated
USB-C 9V 2A Input Port
Power switch/pump
start button
Light switch
Setting button
LCD Display
5V/2A Output Port
LED Flash Light
PRODUCT OVERVIEW & PACKAGE
Operation Instructions
Battery Power:
1 Bar 2 Bars 3 Bars 4 Bars
0 Bar
Ba�ery Icon
Press the power button to check the battery power:
The battery icon will blink one by one during the period of charging. Different bars of battery
icon show different battery power, the battery icon becomes 4 bars when the charging
process was finished.
This unit can be charged with the type-c cable and wall charger(wall charger Not Included).
How to Charge the GT160
3
BATTERY LEVEL INDICATOR & CHARGING
4
3
5
4
2
1
45PSI
2.4BAR8PSI
2.5BAR
Power on, short press the " " key to start to set the air inflator.
1.Long press the "power" button to turn it on, short press the "setting" button to enter the
air pump editing mode, and selet the icon of SUV, car, bicycle and basketball, and then short
press the "+" or "-" keys to adjust the tire pressure value.
2.Short press the "Power" button to start inflation.
STEPS TO USE THE AIR INFLATOR
5
Long press the light switch button to turn on the LED light, the white light will stay on, after
pressing the switch button again, the LED will enter the white light flashing, and then press to
turn off the light.
STEPS TO USE THE AIR INFLATOR
6
TECHNICAL SPECIFICATION
Model
Battery Capacity
Dimensions
Inflation Pressure Range
Length of air hose
Working Noise
lnput
Operating Temperature
Output
Input Port
Output Port
Charging Time
Sensor Accuracy
GT160
27.75Wh
182.8mm*64.5mm*72mm
4-160psi
500mm
Lower than 80dB within 1 meter
5V 2A, 9V 2A （Max 18W）
-20-60 ºC/ -4-140ºF
5V 2A （Max 10W)
USB Type-C
USB-A
about 2h
±2psi
--- ---
---
Q1: What is the operating temperature of this unit and how to store it?
A: This unit is lithium polymer battery, operating temp is -20-60 ºC/ -4-140ºF. If the ambient
temperature is higher than 60ºC/140ºF, the internal construction of the battery cells may be
damaged, it may swell and become unsafe. So don’t store the device in vehicle which parked
in hot weather for long periods of time.
Q2: What should I do if this unit can’t charge up?
A: Charge it with a usb-c cable and wall charger for a full overnight period. If it still does
Q3: What should I do if this unit can’t charge other devices?
A: Try to charge the device with another charging cable, If it works, which means the charging
cable we provided is defective, we will provide you a new one; If it still does not work, please
7
FAQ
Q4: Can this unit charge other devices while it is being charged?
A: Yes.
Q5: How often does this unit need to be recharged?
A: It would be best to recharge it every 3 months.
Q6: Why it shuts off in 30s when charging other devices?
A. This unit may shut off automatically when charging for the devices that need light
charging current, such as headphone, smart watch,etc since there is minimum load current
limitation (200mA) on this unit, it will be automatically off after 30s if the load current is less
than 200mA.
8
FAQ
Autres manuels pour GT160
1
Table des matières
Autres manuels Gooloo Outils électriques
