Goodwe EzLogger Pro SERIES Manuel utilisateur
340-00027-00
EzLogger Pro
Monitoring Data Logger
EzLogger Pro SERIES USER MANUAL
GOODWE (Australia)
19 Faireleigh Street, VIC,
3046, Australia
Tel: +61 3 9324 0559 (after-sales service)
GOODWE (United Kingdom)
46 Foyle Road London N17 0NL
United Kingdom
Tel: 44 (0)333 358 3184
Tel: +31 6 1988 6498 (after-sales service)
Note: The above contact details are subject to change without notice. Please visit our company's
official website www.goodwe.com.cn for details.
Tel: 400-998-1212 (after-sales service)
Company Website Company WeChat
GOODWE (China)
189 Kunlunshan Rd, SND,
Suzhou, China
GOODWE (Netherlands)
Zevenwouden 194,
3524 CX Utrecht, the Netherlands
5.3 ..........................................................................................................Program Upgrade
Table of Contents
Table of Contents
01
Chapter I: Safety Precautions
.....................................................................................................
1.2 Schematic Symbols ..........................................................................................................
1.1 Safety Instructions ............................................................................................................ 01
01
02
............................................................................................
Chapter II: Product Introduction
2.2 Appearance Description ................................................................................................
2.3 Description of LED Indicators ..........................................................................................
2.1 Product Introduction ....................................................................................................... 02
02
05
07
Chapter III: Equipment Installation
.......................................................................................
3.1 Packaging Information ..................................................................................................
3.2 Equipment Installation ..................................................................................................
07
08
Chapter VI: Data Upload and Function Configuration For Wi-Fi EzLogger Pro
........................................................................................... 28
6.1 ...................................................................................How to use Wi-Fi EzLogger Pro 28
6.2 Using ProMate to configure Wi-Fi EzLogger Pro ................................................... 29
4.1 Port Description ...............................................................................................................
4.2 Connection to the Inverter ..........................................................................................
4.3 Connection to the Environmental Monitor and Meter ......................................
4.4 Connection to the Computer ......................................................................................
4.5 Connection to the Ripple Control Receiver ............................................................
4.6 Connection to DRED .......................................................................................................
Chapter IV: Electrical Connection
.......................................................................................... 10
10
13
14
14
16
11
5.1 How to Use LAN EzLogger Pro .................................................................................
Chapter : LAN EzLogger Pro Data Upload and Function ConfigurationV
............................................................................................... 17
17
5.2 ......................................................................................EzLogger Pro Configuration 18
27
Table of Contents
9.1 Certification Mark ............................................................................................................
Chapter IX : Certification and Warranty
..........................................................................
9.4 Warranty Conditions ......................................................................................................
9.5 Disclaimer ...........................................................................................................................
37
37
37
37
9.2 Warranty Period ................................................................................................................
9.3 Warranty Certificate ........................................................................................................
37
37
Chapter VII : Website Monitoring
.................................................................................. 30
7.1 Register A New User and Add A Power Station...................................................... 30
7.2 View Power Station Information .. ................................................. .............................. 33
.............................................................................. 36
Chapter VIII : Technical Specifications
Chapter I: Safety Precautions
Chapter I: Safety Precautions
1.1 Safety Instructions
EzLogger Pro produced by Jiangsu Power Supply Technology Co., Ltd. (hereinafter GoodWe
“GoodWe”) is designed and tested in strict accordance with the relevant safety regulations,
however, as an electrical and electronic device, the following safety instructions shall be followed at
the time of installation and maintenance, improper operation will cause personal injury and property
damage to the operator and third party.
1. Prevent children from approaching EzLogger Pro.
2. Do not open the upper cover, unauthorized touching or replacement of components may cause
personal injury and damage to EzLogger Pro, in this case, GoodWe will not be liable for such injury
or damage or quality warranty.
3. Static electricity may damage electronic components, so appropriate measures shall be taken to
prevent static electricity.
1.2 Schematic Symbols
01
Minor or moderate injury may be caused
It shall not be disposed of as ordinary waste, a special route is required for recycling
Keep upright, and do not tilt or put upside down
Recyclable
Fragile! Handle with care
Keep away from moisture
CE mark
Points of attention
Explanation
Chapter II: Product Introduction
02
Chapter II: Product Introduction
2.1 Product Introduction
EzLogger Pro is a dedicated device for the photovoltaic power generation system monitoring and
management platform, which achieves interface aggregation, data acquisition, data storage, centralized
monitoring, centralized maintenance and other functions for the inverters, environmental monitor, watt-
hour meter and other devices in the photovoltaic power generation system.
2.2 Appearance Description
Introduce the appearance and function of EzLogger Pro.
Introduce the appearance, specifications and ports of EzLogger Pro.
Introduce the main functions of EzLogger Pro.
Figure 2.2-1 External View of EzLogger Pro
L=190mm
H=37mm
03
Front of the box
Side of the box
2.2 Appearance Description
USB
Micro SD
ANT
Reload
1
2
3
4
Wi-Fi or GPRS antenna connector
SD memory card slot
USB slot
Factory reset button
5
Buzzer sound hole
No. Port Port Description
Sound alarm
Figure 2.2-3 Side View of EzLogger Pro Box
Figure 2.2-2 Front View of EzLogger Pro Box
W=118mm
L=190mm
ANT port only can use in Ezlogger Pro with Wi-Fi and Ezlogger Pro with GPRS.
1. SIM card slot
04
Back of the box
1. Wall mounting hole 2. Rail clip 3. Cooling vents
Top surface of the box
2.2 Appearance Description
1
2
3
Figure 2.2-4 Back View of EzLogger Pro Box
1
Figure 2.2-5 Top View of EzLogger Pro Box
SIM card slot only can use in the EzLogger Pro with GPRS.
05
Bottom surface of the box
1
2
3
4
5
6
7
8
No.
2.3 Description of LED Indicators
8
7
6
5
4 321
Figure 2.2-6 Bottom View of EzLogger Pro Box
2.3 Description of LED Indicators
Introduce the meaning of the LED indicators.
The LED indicators are as follows:
Figure 2.3-1 Explanatory Drawing of LED Indicators
06
2.3 Description of LED Indicators
Description of the LED indicators is as follows:
Blue light On
Blue light Off
Blue light flashes (1s
On/Off alternately)
Blue light continue On or
Off
Blue light flashes (1s
On/Off alternately)
Blue light continue On
Blue light Off
Blue light On
Blue light Off
Blue light On
Blue light flashes (1s
On/Off alternately)
Blue light flashes (1s
On and 3s Off alternately)
Blue light Off
POWER
RUN
SERVER
PC
COM1
Power supply is normal
No power supply
EzLogger Pro is running properly
EzLogger Pro is not running properly
EzLogger Pro is properly connected to the external network server
EzLogger Pro is properly connected to the router, but not
connected to the external network server
EzLogger Pro network is not connected
EzLogger Pro is connected to the computer software ProMate
EzLogger Pro is not connected to the computer software ProMate
Number of inverters actually acquired by EzLogger Pro is equal to
the parameter setting
Number of inverters actually acquired by EzLogger Pro is less than
the parameter setting
Number of inverters to be acquired according to EzLogger Pro
the parameter setting is not set
No inverter data acquired by EzLogger Pro
Port Status Status Description
COM2
Blue light On Number of inverters actually acquired by EzLogger Pro is equal to
the parameter setting
Blue light flashes (1s
On/Off alternately)
Number of inverters actually acquired by EzLogger Pro is less than
to the parameter setting
Blue light flashes (1s On
and 3s Off alternately)
Number of inverters to be acquired according to EzLogger Pro
parameter setting is not set
Blue light Off No inverter data acquired by EzLogger Pro
COM3
Blue light On
Number of inverters actually acquired by EzLogger Pro is equal to that
to the parameter setting
Blue light flashes (1s
On/Off alternately)
Number of inverters actually acquired by EzLogger Pro is less than
the parameter setting
Blue light flashes (1s On
and 3s Off alternately)
Number of inverters to be acquired according to EzLogger Pro
parameter setting is not set
Blue light Off No inverter data acquired by EzLogger Pro
COM4 Blue light On Communication of external environmental monitor and other
devices is normal
Blue light Off No external environmental monitor and other devices
07
Chapter III: Equipment Installation
Chapter III: Equipment Installation
3.1 Packaging Information
EzLogger Pro x1
Power adapter x1 Guide rail x1
Expansion screw x2
User manual x1
..... .. ....
......... ..
.... .
.. ...
Wiring terminal x4
Introduce the packaging information and installation process of EzLogger Pro.
After opening the EzLogger Pro package, please check whether the accessories are
complete and there is any apparent damage. If there is any damage or certain items are
missing, please contact your dealer.
Delivery diagram of accessories:
Introduce the packaged accessories of EzLogger Pro.
Figure 3.1-1 Delivery Diagram of EzLogger Pro Packaged Accessories
Power adapter models will be determined according to the safety
regulations of export destination countries.
Wi-Fi Configuration x 1
(Wi-Fi model only)
(Wi-Fi/GPRS model only)
Antenna x 1
Table des matières
Autres manuels Goodwe Enregistreur de données
