Goodmans MICRODAB16BT Manuel utilisateur

USER MANUAL

MODEL: MICRODAB16BT

DAB MICRO

SYSTEM

AUX IN

SOURCE PLAY/PAUSE

ENTER

STOP PREV NEXT

EJECT

STANDBY

Welcome1

Troubleshooting5

Technical Specifications6

Customer Support7

Your DAB Micro System

2.0 In The Box

2.1 Front View

Quick Setup

3.0 Fitting the Remote Battery

3.1 Connecting the Speakers

3.2 Connecting the Power

3.3 Standby & Auto Standby

3.4 Adjusting the Volume

Operation4

CD Operation

4.0 Load a Disc

4.01 Play a Disc

4.02 Skip Tracks And Search

4.03 Programmed Playback

4.04 Repeat Single/All Track(s)

4.05 Random playback

4.06 Numeric Buttons

DAB Radio Operation

4.10 Using DAB For the First Time

4.11 Positioning the Antenna

4.12 Full Scan

4.13 Manual Tuning

4.14 Storing a Station Preset

4.15 Recalling a Preset

4.16 DAB Display Modes

4.17 Secondary Services

4.18 Pruning

4.19 Dynamic Range Control

2.4 Rear View

2.5 Remote Control

3.5 Mute Function

3.6 Tone Adjustment

3.7 DSP Effects

3.8 Loudness Function

3.9 Switching Modes

FM Radio Operation

4.20 Tuning a Station

4.21 Scan Modes

4.22 Stereo/ Mono Mode

4.23 Storing a Station Preset

4.24 Recalling a Preset

4.25 FM Display Modes

4.26 Positioning the Antenna

AUX Input Operation

4.30 Aux In Mode

Bluetooth Operation

4.40 Connecting a Bluetooth Device

4.41 Controlling a Connected Device

General Operation

4.50 Factory Reset

MICRODAB16BT

Welcome

Thank you for choosing this Goodmans product. We’ve been

making electronics for the British people for 70 years. Each of

our projects has been carefully designed to be great at what it

does and this one is no exception. We hope you enjoy your

new DAB Micro System.

Your DAB Micro System2

In The Box

Carefully remove your DAB Micro System from the packaging.

Inside the box you will ﬁnd:

• MICRODAB16BT

• 2 x Speakers

• Remote Control

• Quick Start Guide

• Guarantee Booklet

If any of these items are missing, contact customer support.

Visit: www.goodmans.co.uk/support

2.0

Mains Power

Your MICRODAB16BT requires a mains supply of

230-240V AC ~ 50Hz. Please ensure that your mains supply is

compatible before use. Disconnect the power cord from the

mains when not in use.

Position of DAB Micro System

Place on a ﬂat, stable surface that is not subject to vibrations.

Avoid the following locations:

• Where it is exposed to direct sunlight

• Where it is close to heat radiating sources

• Where the humidity is high and ventilation is poor

• Where it is dusty

Adjusting the Antenna

Fully extend the antenna to ensure good reception in both DAB

and FM Radio modes. It may be necessary to alter the position

of the MICRODAB16BT and/or the antenna to achieve the best

signal.

MICRODAB16BT

Front View2.1

A SPEAKERS.

B STANDBY button.

Press to wake or enter STANDBY

mode.

C STANDBY indicator. This will

illuminate when standby mode is on.

D /ENTER button. In CD/BT mode

press to Play or Pause playback of a

CD.

E SOURCE button. Press to skip

between DAB, FM, CD, BT & AUX

modes.

F button. Press to stop playback of a

CD.

G CD drawer. Place CD onto the

drawer when ejected.

H IR sensor. Remote control sensor.

TAKE CARE WITH

LIVE ELEMENTS

I LCD display. Displays information

required for operation.

J EJECT button. Press to eject/close

the CD drawer.

K button. Press to skip to previous

CD/BT tracks. Press and hold to fast

rewind CD/BT tracks.

L VOLUME control. Rotate clockwise to

increase the volume level and anti-

clockwise to decrease.

M button. Press to skip to next CD/

BT track(s). Press and hold to fast

forward CD/BT tracks.

N AUX input. Connect external audio

sources with a 3.5mm audio cable (not

supplied)

AUX IN

SOURCE PLAY/PAUSE

ENTER

STOP PREV NEXT

EJECT

STANDBY

CAUTION

VISIBLE AND INVISIBLE LASER

RADIATION WHEN OPEN

AVOID EXPOSURE TO BEAM

SPEAKER(4)

ANTENNA

AC 220V-240V ~50Hz

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

WARNING: SHOCK HAZARD - DO NOT OPEN

AVIS: RISQUE DE CHOC ÉLECTRONIQUE - NE PASOUVRIR

WARNUNG: ELEKTROSCHOCK GEFAHR- NICHT ÖFFNEN

LASERSCHUTZKLASSE 1 PRODUKT

CLASS 1 LASER PRODUCT

APPAREIL A LASER DE CLASSE 1

H I J

O P Q

MICRODAB16BT

Rear View

Remote Control

2.2

2.3

O PIGTAIL antenna. Extend for best

radio reception.

P SPEAKER terminals. Insert the

speaker cables into the correct

terminals (see section 3.1).

Q MAINS cable. Connect to a mains

socket.

01 STANDBY button. Press to wake or

enter STANDBY mode.

02 NUMERIC buttons. Used to enter

digits or direct skip to track numbers.

03 button. Press to stop playback of a

CD.

04 MENU button. Press to enter the

DAB or FM menu options.

05 button. Press to skip to previous

CD/BT tracks. Press and hold to fast

rewind CD/BT tracks.

06 ENTER button. Press to select/

activate options.

07 ENTER button. Press to select/

activate menu options.

08 INFO button. Press to display

information about the current DAB or

FM station.

09 DSP. Press to cycle the DSP sound

effect modes.

10 LOUD button. Press to enable the

loudness option.

AUX IN

SOURCE PLAY/PAUSE

ENTER

STOP PREV NEXT

EJECT

STANDBY

CAUTION

VISIBLE AND INVISIBLE LASER

RADIATION WHEN OPEN

AVOID EXPOSURE TO BEAM

SPEAKER(4)

ANTENNA

AC 220V-240V ~50Hz

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

WARNING: SHOCK HAZARD - DO NOT OPEN

AVIS: RISQUE DE CHOC ÉLECTRONIQUE - NE PASOUVRIR

WARNUNG: ELEKTROSCHOCK GEFAHR- NICHT ÖFFNEN

LASERSCHUTZKLASSE 1 PRODUKT

CLASS 1 LASER PRODUCT

APPAREIL A LASER DE CLASSE 1

H I J

O P Q

VOLUME

RANDOM

MICRODAB16BT

Remote Control2.3

VOLUME

RANDOM

11 TONE button. Press to cyle

between bass & treble adjustment

modes.

12 MUTE button. Press to activate the

audio mute function.

13 UNPAIR button. Press to unpair a

connected Bluetooth device.

14 EJECT button. Press to eject or

close the CD drawer.

15 DAB/FM button. Press to switch to

DAB mode. Press again to switch to

FM mode.

16 CD button. Press to switch to CD

mode.

17 BT button. Press to switch to

Bluetooth mode.

18 AUX IN button. Press to switch to

AUX input mode.

19 button. Press to skip to next CD/

BT track(s). Press and hold to fast

forward CD/BT tracks.

20 REPEAT button. Press to cycle

between the repeat playback modes.

21 RANDOM button. Press to enable

the random playback mode.

22 PROG. button. Press to enable the

programmed playback function.

23 VOLUME +/- buttons. Press the ‘+’

button to increase the volume level.

Press the ‘-’ button to decrease the

volume level.

MICRODAB16BT

3.0

3.1

Quick Setup3

Fitting the Remote Battery

1. Press the small tab to the left of the battery insert inwards.

Then slide the battery insert out of the main remote unit.

2. Insert 1 x CR2025 battery into the removable battery slot

taking note that the + polarity faces upwards.

3. Replace the battery insert by simply pushing back into the

space you removed it from.

Leaking batteries may damage the battery cabinet and the

remote as a whole. If you are not going to use the

MICRODAB16BT for an extended period, please remove the

battery to avoid damage.

Caution: Danger of explosion if battery is incorrectly replaced.

Replace only with the same or equivalent type.

Connecting the Speakers

1. Unwrap the speaker wires.

2. Place a speaker on either side of the main unit, preferably at

the same height, and with at least 150mm between each

speaker and the main unit.

3. Connect the speaker wires to the terminals on the rear of

the unit (P). Take care to match the speaker placed to the

LEFT to the LEFT output on the rear of the unit. Repeat for

the RIGHT speaker.

4. When connecting ensure the RED wire connects to the

RED terminal and the BLACK wire to the BLACK terminal.

RIGHT SPEAKER LEFT SPEAKER

REAR PANEL

MICRODAB16BT

3.3

3.2

3.4

3.5

Connecting the Power

1. Insert the plug into a power socket, and switch the power on.

2. Press the STANDBY button on either the main unit or remote

control.

Standby & Auto Standby

1. Press the STANDBY button to wake from standby mode.

2. Press the STANDBY button again to enter Standby mode.

Due to new ECO regulation requirements this product

incorporates a power saving feature.

3. When in CD, BT or AUX mode, once audio playback has

ceased and the unit has stood idle for approximately 20

mins, it will switch into a ‘power-down’ power saving mode.

4. To wake the unit up, press the STANDBY button.

Adjusting the Volume

1. Rotate the volume control clockwise or anti-clockwise to

increase or decrease the volume output.

2. Press the VOLUME +/- buttons on the remote control.

Mute Function

1. Press the MUTE button at any time to silence the output.

2. Press again to resume audio output.

SOURCE PLAY/PAUSE

ENTER

STOP PREV NEXT

EJECT

STANDBY

CAUTION

VISIBLE AND INVISIBLE LASER

RADIATION WHEN OPEN

AVOID EXPOSURE TO BEAM

SPEAKER(4)

ANTENNA

AC 220V-240V ~50Hz

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

WARNING: SHOCK HAZARD - DO NOT OPEN

AVIS: RISQUE DE CHOC ÉLECTRONIQUE - NE PASOUVRIR

WARNUNG: ELEKTROSCHOCK GEFAHR- NICHT ÖFFNEN

LASERSCHUTZKLASSE 1 PRODUKT

CLASS 1 LASER PRODUCT

APPAREIL A LASER DE CLASSE 1

MICRODAB16BT

Tone Adjustment

1. Press the TONE button on the remote control.

2. The ﬁrst adjustment is Bass. Use the VOL+/- buttons to

adjust.

3. Press the TONE button again to edit the Treble using the

VOL+/- buttons to adjust.

DSP Effects

1. Pressing the DSP button repeatedly cycles through a set of

EQ presets to alter the sound ﬁeld. Choose from: Flat,

Classic, Rock, Pop & Jazz.

Loudness Function

1. Press the LOUD button on the remote to enable.

2. Press again to disable the effect.

Switching Modes

To switch between the available modes: CD, DAB/FM & AUX

IN follow the below steps.

1. Press the SOURCE button on the main unit to cycle through

the options or press the relevant button on the remote

control from CD, DAB/FM (press repeatedly to cycle

between DAB & FM) & AUX IN.

SOURCE PLAY/PAUSE STOP PREV NEXT

STANDBY

BASS 0

SOURCE PLAY/PAUSE STOP PREV NEXT

STANDBY

CD Mode

DSP:FLAT

3.6

3.7

3.8

3.9

MICRODAB16BT

CD Operation

Operation4

Load a Disc

1. Open the CD drawer by pressing the EJECT button.

2. Load a disc onto the disc tray with the label side facing up.

3. Press the EJECT button once more to close the CD door.

Play a Disc

1. Follow the steps above to load a disc (if not already loaded).

2. The player begins to read the disc immediately.

3. When the disc is successfully read playback begins

automatically with the ﬁrst track.

4. Press the /ENTER button once to pause the music

playback. The track timer ﬂashes to indicate the player is in

pause mode; press the button to cease music playback.

The LED shows the total number of tracks and the duration

of all the tracks together.

Skip Tracks and Search

1. Press the button once during playback to skip to the

next track. To skip to a speciﬁc track, press this button

several times until you reach the track number required.

2. Press the button once during playback to return to the

beginning of the current track. Press the button twice

repeatedly to skip to the previous track. To skip back to a

speciﬁc track, press this button several times.

3. Hold the button during playback to fast forward the

current track.

4. Hold the button during playback to fast rewind the

current track.

4.0

4.01

SOURCE PLAY/PAUSE STOP PREV NEXT

STANDBY

DISC CD

Track 01 00:16

4.02

RANDOM

Autres manuels pour MICRODAB16BT

Table des matières

Autres manuels Goodmans Système stéréo

Goodmans

Goodmans MICRO1467I Manuel utilisateur

Goodmans

Goodmans GPS165MP3R Manuel utilisateur

Goodmans

Goodmans MICRO1109IP Manuel utilisateur

Goodmans

Goodmans Micro 1455 Manuel utilisateur

Goodmans

Goodmans 335105 Manuel utilisateur

Goodmans

Goodmans GMC6039DVD Manuel utilisateur

Goodmans

Goodmans MICRO 1930DVD Manuel utilisateur

Goodmans

Goodmans MICRO 1465i Manuel utilisateur

Goodmans

Goodmans GMC 1034DAB Manuel utilisateur

Goodmans

Goodmans 336723 Manuel utilisateur

Goodmans

Goodmans IPHONE MICRO1468I Manuel utilisateur

Goodmans

Goodmans MICRODAB10 Manuel utilisateur

Goodmans

Goodmans GMN10040MP3 Manuel utilisateur

Goodmans

Goodmans GMS950R Manuel utilisateur

Goodmans

Goodmans GMC01 Manuel utilisateur

Goodmans

Goodmans GMS880 Manuel utilisateur

Goodmans

Goodmans GMC1042MP3 Manuel utilisateur

Goodmans

Goodmans MICRO1530 Manuel utilisateur

Goodmans

Goodmans GSR85DAB Manuel utilisateur

Goodmans

Goodmans 2719 Manuel utilisateur

Goodmans

Goodmans 329582 Manuel utilisateur

Goodmans

Goodmans Micro 1990 DVDF Manuel utilisateur

Goodmans

Goodmans 4160AV Manuel utilisateur

Goodmans

Goodmans GMC1034DAB Manuel utilisateur

Manuels Système stéréo populaires d'autres marques

LG CM3330B Manuel utilisateur

Sony

Sony SS-CEP50 Manuel utilisateur

Cetacea Sound

Cetacea Sound CVS-II Manuel utilisateur

Aiwa

Aiwa XR-H66MD Manuel utilisateur

Denon

Denon UCD-250 Manuel utilisateur

Sanyo

Sanyo DC-MX41i Manuel utilisateur

Sharp

Sharp CD-ES600V Manuel utilisateur

Exibel

Exibel BDX600-UK Manuel utilisateur

Sanyo

Sanyo DC-F320 Manuel utilisateur

Philips

Philips FWM583X Manuel utilisateur

Sharp

Sharp CD-C462 Manuel utilisateur

Onkyo

Onkyo CBX 300 - CD / MP3 Clock Radio Manuel utilisateur

Aiwa

Aiwa XR-EM70 Manuel utilisateur

Cyrus

Cyrus Lyric Manuel utilisateur

Philips

Philips MCM159/98 Manuel utilisateur

Philips/Magnavox

Philips/Magnavox Magnavox FW 62C Manuel utilisateur

RCA

RCA RS3965SB Manuel utilisateur

Sharp

Sharp XL-UH240 Manuel utilisateur