Additional controls and important information.
How to insert Batteries
Removethecover fromthe backof theremote
_:__ controller.
Inserttwo batteries.
, Be sureth_ the (+)and(-) directionsarecorr,:.
. Be surethat _th batteriesare new.
Re-attachthecover.
,Do notuserechargeablebatteries Such
batteriesdiffer _om standarddryceils in
shape, dimensions,and performance.
,Removethe b_eries fromtheremote
controllerifthe air conditionerisnot
goingto be usedforan exlended length
oftime,
The ventilation lever must be in the CLOSE position in order to maintain the best cooling conditions.
When fresh air is necessary in the room, set the ventilation lever to the OPEN position.
The damper is opened and room air is drawn out.
NOTE: Before using the ventilation feature,
position the lever, _ shown. First, pull down
part C] to horizontal line with part CL
i Pa_j
fi
l!
Pa_@
Air Direction
The direction of air can be controlled wherever you
want to cool by adjusting the horizontal louver and
the vertical louver.
•HORIZONTAL AIR-DIRECTION CONTROL
Control the horizontal air direction by air swing
system
•VERTICAL AIR-DIRECTION CONTROL
The ve_ical air direction is adjusted by moving the
horizontal louver.
Howto Attach DrainPan
The air conditioner employs a proper drain method whereby the con@nsed water (moisture removed from
the air} is drained to the outside.
in very humid weather, (and for reverse cycle models in the reverse mode) ex_ssive condensate water
removed from the air may cause some water to collecL To remove this excess water you can install the
drain pan as detai!_ below. CABINET
1.Take the drain pan which is located inthe air discharge.
2. Remove the hole rubber from the b_e-pan (for some models). "-
3. Installthe drain pan to the right corner of the cabinet with 4 (or 2) screws.
4. Conne_ the drain hose of 3/5"inside diameter to the outlet located at the
bottom of the drain pan.You can purchase the drain hose or tubing locally PAN
to satisfy your particular needs, (Drain hose is not supplied).
DRAIN HOSE-
