Gold Note S-3 Anniversary Manuel utilisateur

GOLD NOTE®

S 3

ANNIVERSARY

ITALIAN PRESTIGE DUAL MONO INTEGRATED AMPLIFIER

Owner’s Manual

MANUFACTURED IN ITALY

TEL.+39.0571.675005 FAX.+39.0571.675013

S3 Anniversary Italian Prestige Integrated Amplifier

Table Of Contents

-Congratulations & Introduction 3

-Box Content 4

-Installation & Positioning 4

-Operating the S3Anniversary 4

-Panel Features 5

-Volume & Remote Control 6

-Technical Specifications 7

-Warranty, Customer Service & Warnings 8

-Troubleshooting 9

-F.A.Q. 8

-Troubleshooting 9

VERY IMPORTANT: Please read the following instructions carefully before installing your Gold Note

Integrated Amplifier

S3 Anniversary Italian Prestige Integrated Amplifier

Congratulations

Thank you for having purchased a GOLD NOTE® product.

Introduction

The S-3 Anniversary is a true Dual-Mono high

end audio integrated amplifier using the

famous Gold Note proprietary Mirror-Amp™

design technology that virtually eliminates

the best audio distortion even at high level of

volume.

The amplifier features a power supply

enhanced by two custom EI massive

transformers.

The two transformers are dedicated to the

audio signal path exclusively, while an internal galvanically insulated third transformers drives all the functions

that could adversary affect the sound of the amplifier, such as all the accessories functions including the motor

of the volume control, LED lights, etc….

The S-3 Anniversary does not have active or passive filters on the audio signal path. The amplifier features

thermal switches to turn off the unit if it reaches an internal high temperature. This feature, while preventing,

dangerous operating conditions also enables the amplifier to achieve the very best sonic performance

eliminating completely any audio signal path interference.

The amplifier chassis is made of Steel to minimize RFI and EMI interference.

The remoted volume control is powered by a motorized inductive plastic film ALPS 50Kohm potentiometer

setup to let the amplifier work very smoothly raising up the volume gently to be able working perfectly even

with high sensitivity speakers as well as the mid efficiency ones.

The S-3 Anniversary features a Virtual Vinyl line RCA stereo input. The exclusive Gold Note Virtual Vinyl input

allows the unit to perform a warmer audio signal and higher gain for all line sources enhance such nice charmy

audio benefit.

The S-3 Anniversary features a high quality built in headphone amplifier having a 6,3mm jack output, a

remoted volume control, 4 RCA line inputs, one XLR line input (optionally RCA) and 1 Virtual Vinyl line input.

Congratulations & Introduction 3

S3 ANNIVERSARY Italian Prestige Integrated Amplifier

(Contents of Packaging)

•1pc. INTEGRATED AMPLIFIER UNIT

•1pc. DETACHABLE AC POWER CHORD

•1pc. REMOTE CONTROL

•INSTRUCTIONS MANUAL

(Set-Up Instructions)

-Open all the cartons inside the main box and look that all the components listed are present.

-Carefully remove the amplifier chassis from the shipping box and foam.

-Connect the audio cable (not supplied) and the supplied AC Power Chord.

Rear Panel

o(1) IEC PLUG with FUSE - 100 -240 Volt - 50/60Hz with 3,15 A fuse

o(2) LEFT CHANNEL BINDING POSTS - Speaker Output

o(3) RIGHT CHANNEL BINDING POSTS - Speaker Output

o(4) GROUND FLOATING –Float the ground to isolate the unit –Lift up Floating, Lift down Super Ground

o(5) VIRTUAL VINYL LINE STEREO RCA IN –Enhance warm & higher level analogue sound for line sources

o(6) CD LINE STEREO RCA INPUT

o(7) AUX 1 LINE STEREO RCA INPUT

o(8) AUX 2 LINE STEREO RCA INPUT

o(9) AUX 3 LINE STEREO RCA INPUT –Only available on demand in parallel with the (12) XLR Inputs

o(10) AUX 1 LINE STEREO RCA INPUT

o(11) AUX 1 LINE STEREO RCA INPUT

o(12) AUX 3 LINE STEREO XLR INPUT

Contents of Packaging - Positioning –Operating Conditions 4

S1 ANNIVERSARY Italian Prestige Integrated Amplifier

(Operating Conditions)

The amplifiers has been designed for use in Hi-Fi systems in sheltered locations. It ought therefore to be protected from

any eventual variations in temperature and humidity. Avoid to use the unit close to radiators or other strong heat sources,

electrical and electronic motors, switched on mobile phones etc. The location in proximity of other audio components is

not theoretically critical, but you should nevertheless pay attention to this. In any case, take care to unplug completely

the unit every time you need to move it, or to move the turntable on which it is installed.

TO ACHIEVE HIGHEST POSSIBLE QUALITY SOUND PERFORMANCES THE S AMPLIFIER DOES NOT HAVE ANY OUTPUT PROTECTION. SHORT CIRCUIT AND

TOO LOW IMPEDANCE SPEAKERS (BELOW THAN 4 OHMS) THAT COULD IRREMEDIABLY DAMAGE THE AMPLIFIER IF IMPROPERLY USED.

THE UNIT IS PROVIDED WITH THERMAL SWITCHES SETUP ON BOTH CHANNELS HEAT SINKS AND POWER TRANSFORMERS. BEFORE THE UNIT REACHES

A DANGEROUS TEMPERATURES IT TURNS OFF AUTOMATICALLY UNTIL COOLED DOWN TO A REGULAR OPERATING TEMPERATURE LEVEL.

TYPICALLY IF THE UNIT TURNS OFF DURING PLAYING IT TAKES 30 MINUTES TO COOL DOWN AND SWITCH IT ON AGAIN.

EVENTAULLY TEST THE UNIT WELL BEFORE CALLING ASSISTANCE FOR SERVICE.

Front Panel

o(14) ON/OFF - Master switch, it turns the unit ON/OFF completely.

o(15) BLUE LED Light –It shows the unit ON/OFF

o(16) INPUT SELECTOR –6 position manual rotative input selector

o(17) IR RECEIVER –for remote control

o(18) VOLUME CONTROL –Rotative remoted volume control knob

o(19) HEADAPONE SOCKET –6.3mm Headphone socket

Volume Control

The volume control of this unit is made with an high quality potentiometer made by ALPS. It is so precise that its error ability to track is very low.

Besides it is made with such materials that render its durability far superior than standard audio potentiometer.

The remote volume control with its proper electronic board and power transformer (to avoid any kind of interferences on signal path) works directly on a

DC motors positioned on the back of the potentiometer to avoid the use of electronic controllers can reduce sound quality.

Operating Conditions 5

S1 ANNIVERSARY Italian Prestige Integrated Amplifier

(REMOTE CONTROL)

•Select CD from the rectangular frame to activate the

Amplifier functions on the remote.

•The arrows VOLUME UP & DOWN allow to control

the volume.

PLEASE NOTE: All the other functions of the remote are dedicated to eventual other Gold Note units.

Remote Control Function 6

S3 ANNIVERSARY Italian Prestige Integrated Amplifier

Technical Specifications

MAIN DETAILS

POWER OUTPUT

100w + 100w @ 20-20000Hz

FREQUENCY RESPONSE

20Hz –20KHz @ +/- 3dB

THD (Total Harmonic Distortion)

<0.08% THD @ 20Hz-20KHz

RATIO SIGNAL TO NOISE

-105dB

DAMPING FACTOR

>150

SLEW RATE

13Volt/µs

VOLUME CONTROL

Motorised ALPS potentiometer

AUDIO INPUTS

ANALOGUE INPUTS

4 per Line RCA + 1 XLR & 1 RCA Virtual Vinyl stereo (to

enhance virtual analogue replay)

INPUT SENSITIVITY

550mV (all input)

INPUT IMPEDANCE

47kΩ

HEADPHONE

6.3mm jack

AUDIO OUTPUTS

SPEAKER

Gold plated binding posts

FIXED OUTPUT

One stereo RCA (optional variable)

CONNECTIVITY

REMOTE INFRA-RED

RC5 proprietary code variable on Volume only

POWER

MAINS SUPPLY

100V ▪115V ▪230V ▪50 or 60Hz (depending on market

destination not convertible)

POWER TRANSFOMERS

2 audio E core customised + 1 service unit

POWER CONSUMPTION

350watt Max –40watt Min.

UPGRADES

SPECIAL

Gold Note Lucca Power Chord

PHYSICAL

DIMENSIONS

425mm L x 105mm H x 350mm D

TOTAL WEIGHT

12Kilos

FINISHES

FRONT PANEL

Brushed Black or Silver anodised aluminium

CASE

Black powder coated

Technical detail & pictures may vary without notice

Volume Control –Technical Specifications 7

S3 Anniversary Italian Prestige Integrated Amplifier

(Warranty Registration)

To validate the warranty is necessary to register the unit on the Gold Note internet web site within 15 days from the purchase on the appropriate area of

the web site: http://www.goldnote.it/

If the unit is not registered correctly or is been purchased from a different country of the purchaser origin/home the unit will not be covered by any

warranty and the eventual registration refused.

The warranty does not does not cover in any case: Tubes, Phono Cartridge Styli and Batteries.

(Customer Service)

All GOLD NOTE® products are the result of meticulous technological research, and consequently their correct functioning is guaranteed. In spite of this it

is possible that problems may emerge which non-specialist users cannot resolve. In this case, contact your dealer who will advise you on how to resolve

the problem.

Do not return any object directly to the factory or to the national distributor or without being authorized to do so. In such cases both GOLD NOTE® and

the distribution agents operating within your territory decline responsibility of any kind.

Please Note: Descriptions and technical characteristics may vary in any moment without notice.

Warnings

1. Do not disassemble any part of the product.

2. Do not use any part of the product for other purposes.

3. For service and problems of any kind, contact qualified Gold Note personnel.

4. Protect the product from rain and humidity and keep away from heat sources, electric and electronic motors etc.

5. The power Chord supplied must be used only on this unit.

6. Gold Note does not have responsibility for any improper use of this unit

Warranty Certificate –Customer Service –Warnings - F.A.Q. 8

S1 ANNIVERSARY Italian Prestige Integrated Amplifier

Troubleshooting

SYNTOM

DESCRIPTION

REASON

REMEDY

THE AMPLIFIER DOES NOT

WORK

The LED (15 is off

•The power Chord is detached or

not correctly powered

•Verify the AC power chord

connection.

.

•Then Fuse is blown

•Replace the fuse with one of

the same value.

THE AMPLIFIER SHUT DOWN

DURING PLAYING

•The unit warms up too much and

the thermal switches inside turn it off

waiting to cool it down

•Be sure the unit is necessarily

positioned in a airy place.

The PHONO (DISC) INPUT DOES

NOT WORK

•The Phono MM & MC i san

optional feature

•Be sure you have it installed on

the position wanted

THE AMPLIFIER HAS A LOW

LEVEL VOLUME WORKING

The amplifier needs to raise

up the volume knob over the

third quarter of the total run

to drive mid sensitivity

speakers

•The Unit is designed to play also

high sensitivity speakers and the logarithmic

volume control features a soft raising that

enable the mid efficiency speakers work on

high knob position

•There is no problem of

distortion even if the amplifiers drives the

speakers with volume knob closed to

maximum level

Troubleshooting 9

Note:…………………………………………………………………………………………………………………………………………………………………………..

.........................................................................................................................................................................................................

Gold Note S-3 Anniversary Manuel utilisateur

Manuels Amplificateur populaires d'autres marques