54
Your Light-a-Life LED light can power from a
Sherpa® Power Pack or Goal Zero Yeti® Solar
Generator.
1. Insert the green plug into a 6mm 12V port on
a Sherpa Power Pack or Yeti Solar Generator.
Ensure the 12V port on your power source is
turned on.
2. Use the power switch on top of the Light-a-
Life to turn it on. Toggle between high and low
settings by moving the switch left or right.
3. Hang with the carabiner or attach to a metal
surface with the magnets.
You can also power the Light-a-Life from a 12V
car port using the included adapter. Simply
plug the Light-a-Life’s blue connector into the
matching end of the 12V adapter.
Unexpected rainstorms probably won’t harm it.
Ready for Outdoor Use: The Light-a-Life has been
engineered to withstand the elements, including
rain and snow. Although it’s tough enough to
withstand a storm, the Light-a-Life should not be
submerged in water and all ports/plugs should be
dry before turning on or chaining.
HOW IT WORKS
You can chain up to 8 Light-a-
Lifes together.
1. Begin chaining with the first
light in your string that will plug
into your Sherpa Power Pack or
Yeti Solar Generator.
2. Tug slightly on the green
covering over the chaining port
to expose the chaining port.
3. Insert the green plug from
another Light-a-Life into the chaining port.
4. Continue on with the remainder of the lights
in your string.
Helpful Hint: Ensure each light
is turned on prior to hanging.
This allows you to turn the entire
string on/off by controlling the
first light in the series.
WARNING: While in use, the
metal neck of the Light-a-Life will
become hot to the touch. It is still
safe to wrap the cable around the
metal neck while in use.
CHAINING
