Glide Gear TMP 500 Manuel utilisateur
TMP 500
For more informaon please visit our website: www.glidegear.net
Requirements
In order to use the TMP 500, you will need the following items, which are not in-
cluded with the TMP 500:
• A video recording device such as a DSLR or a Mirrorless camera, a tablet
or a smartphone. The TMP 500 does not come with a phone or a tablet
mount/adapter.
• A device, typically, a tablet or a cellphone, displaying the script to be read
in front of the camera. The device will need to be equipped with a tele-
prompng applicaon or soware allowing mirroring of text.
• A tripod capable of supporng the weight of the enre setup.
Compability
• DSLR/Mirrorless Cameras: The height of the camera can be adjusted by a
total of 2,9” or 74mm
• Tablet/Cell phone: the maximum display the TMP 500 will accommodate
without part of the screen being cut o is 9.9”x 5” or 25cm x 12.5cm
• The TMP 500 rails are 14” (35.5cm) long industry standard 15mm rails.
Longer lenses might require using 15mm rail extensions to be used with
the TMP 500
App Download
Download a free or a paid version of a teleprompter
in the app store of your tablet or cellphone. The app
must be able to mirror the script in order to funcon
properly with the TMP 500.
TMP 500
1The TMP500 can be mounted onto a tripod or a
shoulder rig.
For more informaon please visit our website: www.glidegear.net
2
4The mirror’s angular posion can be adjusted
by using the 2 thumbscrews on each side of
the mirrors (Fig. B).
5Rotate the mirror so it makes a 45 degree angle
with the rails as pictured in Fig. C)
Fig. B
Fig. C
45-degree angle
5
Tripod Mount: When using a tripod, remove the
cheese-plate from the tripod head and screw it
onto one of the mounng holes at the boom of
3Shoulder-Rig Mount: The TMP500 can only be
used with shoulder rig equipped with 15mm
rails. Simply screw the 2 rails into the rail of the
shoulder rig to mount the TMP500 (Fig. A). Fig. A
32
6
4
Tighten the thumbscrews
on each side of the mirror
to lock it in place.
Assembly
TMP 500
7Mount your prompng device such a tablet
onto the TMP 500 by clamping your tablet
as pictured in Fig. D.
7
Fig. D
8Mount your camera on the camera
plaorm.
8
ADJUSTMENTS
(i) CAMERA HEIGHT: using the slot in the back of the cam-
era plaorm, adjust the height of the camera so its lens is
at the center of the mirror.
i
(ii) CAMERA POSITION: Move the camera plaorm
along the rails so that its lens is as close as possible
to the mirror.
ii
(iii) MIRROR ANGLE : Adjust the mirror's angle so
that the person reading the text can clearly read
the text displayed on the prompng device while
looking straight at the camera
iii
Fig. E
For more informaon please visit our website: www.glidegear.net
TMP 500
For more informaon please visit our website: www.glidegear.net
The TMP 500 includes 2 extra 1/4-20 mounng screws.
Use the mounng screws to mount the accessories of your choice
on each side od the frame holding the mirror as pictured in Fig. F
Mounng Accessories
Fig. F
The TMP 500, thanks to its 15mm rails can
be mounted on any standard shoulder rig
featuring 15mm rails as pictured on the
right.
Shoulder Rig
Table des matières
Autres manuels Glide Gear Accessoires pour appareils photo
Glide Gear
Glide Gear G2G Vest Manuel utilisateur
Glide Gear
Glide Gear REVO 50 Manuel utilisateur
Glide Gear
Glide Gear DEV-1000 Manuel utilisateur
Glide Gear
Glide Gear Dev Dolly Pro Manuel utilisateur
Glide Gear
Glide Gear F2F 25 Manuel utilisateur
Glide Gear
Glide Gear JB4 Quick-Jib Instruction manuelle
Glide Gear
Glide Gear OH 200 Manuel utilisateur
Glide Gear
Glide Gear LEIOS SMOOTH-C Manuel utilisateur
Glide Gear
Glide Gear DST 50 Manuel utilisateur
Glide Gear
Glide Gear AXJ-100 Manuel d'installation et d'exploitation
