Gira 1279 series Manuel utilisateur

Installation and

Operating Instructions

Surface-mounted home station video

1279 ..

Contents

Device description ................................................3

Operation ..............................................................4

Normal conversation mode...................................6

Switching functions ............................................10

Structure of menu interface ................................11

User menu ..........................................................12

Start-up menu .....................................................19

Installation...........................................................26

Connection..........................................................27

Removal ..............................................................28

Start-up ...............................................................29

Assigning a door station to

surface-mounted home station video .................30

Assigning surface-mounted home station video

to a flush-mounted home station.........................31

Assigning a flush-mounted home station to

surface-mounted home station video .................32

Assigning a switching actuator to

surface-mounted home station video .................33

Assigning surface-mounted home

station video via floor-call button........................34

Deleting all call button assignments

via floor-call button .............................................35

What to do if... ....................................................36

Notes on care......................................................37

Technical data .................................................... 38

Warranty ............................................................ 39

Device description

The surface-mounted home station video from the

Gira telecommunication system is a completely

preassembled unit with a 2" TFT colour display

and a convenient hands-free speech function.

The surface-mounted home station video is

operated with capacitive operating buttons. The

system settings and operation are supported with

an on-screen display in 21 selectable languages.

1 Cover frame, 2-gang without crossbar

(not included in the scope of supply; frameless

installation only possible with wall mounting)

2 Mounting plate

3 Surface-mounted home station video

4 Fixing holes for wall mounting

5 Fixing holes for box mounting

6Terminalblock

7 Protective cover (for protecting the terminal block

during installation or renovation work)

BUS

Operation

The surface-mounted home station video is oper-

ated with capacitive operating buttons. All that is

needed for operation is to lightly touch the sym-

bols. Successful actuation of the buttons is sig-

nalled by an acknowledgement tone, which can

be switched off if desired.

The operating buttons have the following

functions:

specifically switches the display and the

related colour camera on and off:

To switch on, briefly press . If several colour

cameras are installed, the last active camera is

switched on.

To switch off, press and hold for

approx. 2 seconds.

If several colour cameras are connected, is

also used to switch to the next camera.

After a door call, the camera image from the door

station which initiated the door call is displayed.

Pressing switches on the next camera and

then the one after that, etc. Once the last camera

is reached, the next press of the button switches

back to the first camera. If several colour cameras

are installed, the number of the active camera

(e.g. Cam 1) is displayed for approx. 5 seconds in

the lower part of the display.

In the menus, serves as a "Back button", i.e.

pressing this button moves back one step in the

menu or exits the menu again.

Briefly pressing the button activates the menu

(see Page 11).

OK confirms the menu item selected in the

display.

Selection of the menu items or settings in the

display.

If no menu is active, the voice volume (see Page 7)

and the ringing tone volume (see Page 7) are set

with .

Directly switches a switching actuator

(see Page 10).

Used for ringing tone deactivation (see Page 8).

Operation of the door opener (see Page 10).

Accepts and ends call and operates the

enforcement function (see Page 6).

Normal conversation mode

Accepting a call

✓When a call is received, flashes for two

minutes.

1. Press to begin intercom conversation with

the person at the calling station.

✓During the intercom conversation, lights up.

If the call comes from a video door station, the

display (main display) is automatically switched on

and shows the camera image.

If several colour cameras are installed, the number

of the camera displayed is shown.

If the call comes from a door station audio or a

home station, the type of call ("Door call" or "Inter-

nal call") and "Accept call" are shown in the dis-

play. In this case, the call can also be accepted

with OK.

A colour camera in the system can be switched on

with the "Camera" function button. If several

colour cameras are present, the last active camera

is switched on.

Maximum conversation time

The maximum conversation time is 2 minutes.

When this time expires, the conversation is

automatically ended.

Operation without

additional power supply

If the surface-mounted home station video is

operated without an additional power supply, no

message appeares in the diplay. When a call is

received, flashes for two minutes.

Camera 1

Door call

Accept call

Camera OK

Enforcement function

If the background noises at the door station are so

loud that automatic switching of the speech direc-

tion is not guaranteed, the enforcement function

can be used:

1. Press and hold while speaking.

While the button is being pressed, it is only

possible to speak from the flush-mounted

home station video to the door station.

2. To end the enforcement function and release

the call from the door station again, release

again.

End call

✓During the intercom conversation, lights up.

1. Briefly press to end the voice connection.

✓The illumination of the goes out.

During a conversation with an audio door station

or an internal conversation with another home sta-

tion, "End call" appears during the conversation.

In this case, the call can also be ended with OK.

Setting the speech volume

The speech volume is changed to one of eight

levels during intercom communication.

The speech volume is increased with and

decreased with .

Setting the ringing tone volume

The ringing tone volume is changed to one of eight

levels when no intercom communication is in

effect.

The ringing tone volume is increased with

and decreased with .

Door call

End call

Camera OK

Deactivating/activating ringing tone

1. Press to deactivate the ringing tone.

✓With the ringing tone deactivated, lights up.

2. Press again to reactivate the ringing tone.

✓The illumination of goes out.

Switching off the ringing tone with Automatic

call acceptance activated

When flashes, Automatic call acceptance is

active. With Automatic call acceptance active, it

is not possible to change the status of the ringing

tone deactivation. If the ringing tone is to be

deactivated or activated, first the Automatic call

acceptance must be deactivated in the "Options"

menu (see Page 16).

If is pressed with Automatic call acceptance

activated, the current status of the ringing tone

deactivation is shown:

• If lights up for approx. 3 seconds, the ringing

tone is deactivated.

• If goes out up for approx. 3 seconds, the

ringing tone is activated.

Then flashes to indicate that Automatic call

acceptance is active.

Only deactivate the ringing tone if

necessary

Only deactivate the ringing tone in special cases.

Otherwise, your run the risk of not hearing the

ringing in an emergency, for example.

Switching on camera image

With the display of the home station and the

related colour camera can be specifically switched

on/off:

1. To switch on, briefly press .

✓If several colour cameras are present, the last

active camera is switched on.

✓With several colour cameras, the designation of

the camera currently active is shown in the

lower area of the display for approx. 5 seconds.

2. To switch off, press and hold for

approx. 2 seconds.

Changing to next colour camera

If several colour cameras are installed, it is possi-

ble to switch to the respective next camera with

1. Briefly pressing switches on the next

camera in each case.

✓The designation of the camera currently active

is shown in the lower area of the display for

approx. 5 seconds.

Switching functions

Opening door

1. The door opener is operated with .

✓If several doors are present, the door opener of

the door station from which the door call was

made is operated within 2 minutes. It switches

to the main door 2 minutes after the start of the

call or 30 seconds after the door call is ended.

Switching light on (only in conjunction with a

switching actuator)

Switching actions can be triggered in two differ-

ent ways:

• press to switch on the light (e.g. the outdoor

or staircase illumination)

• with the "Switching" menu (see Page 13)

Autres manuels pour 1279 series

Table des matières

Manuels Autre populaires d'autres marques

GO Industries

GO Industries 38017 Manuel utilisateur

Cissell

Cissell 30LBCMAN2 Manuel utilisateur

RIDGID

RIDGID K-60SP Manuel utilisateur

Gage Bilt

Gage Bilt GB751SH-5 Manuel utilisateur

OVE

OVE SIERRA 60 Manuel utilisateur

ReelCraft

ReelCraft 7800 OLB21 Manuel utilisateur

Body Armor 4x4

Body Armor 4x4 ECO-SERIES Manuel utilisateur

ROBLIN

ROBLIN DROP Guide de l'utilisateur

EMG

EMG EMG-ACB BARREL Manuel de service

MiniSolar

MiniSolar MT-150 Manuel utilisateur

Parkside

Parkside PSZ 250 B2 Manuel utilisateur

ABB

ABB REM 610 Manuel du produit

Parkside

Parkside 55992 Manuel du propriétaire

Skyjacker

Skyjacker F250 Manuel utilisateur

IBM

IBM IBM SYSTEM Z Guide d'installation

Grech Motors

Grech Motors G28 Manuel utilisateur

NOVAK

NOVAK BATTERY CARE SHEET Mode d’emploi

Telemotive

Telemotive blue PiraT Mini Guide de l'utilisateur