Gira Touch sensor 2 Manuel utilisateur

GIRA

Info Touch sensor 2, 24 V potential-free

Installation Instructions

Touch sensor 2, 24 V potential-free 3/12 Page 1 of 3

Function

• touch sensors for connection to 24 V control

systems

• two red status indication LEDs for each rocker

• backlighting

• connection with terminal block at the rear

Connection

Button outputs and LED inputs (FIG. B)

Touch sensor 2, 24 V potential-free

single

triple Order no.: 2001 ..

Order no.: 2003 ..

Sensor terminal

(upper row) assigned

rocker: LED terminal

(lower row)

triple single

1 1 left 1 left 1

2 1 right 1 right 2

3 2 left ---- 3

42right---- 4

5 3 left ---- 5

63right---- 6

---- ---- 7

lighting 8

GIRA

Info Touch sensor 2, 24 V potential-free

Installation Instructions

Touch sensor 2, 24 V potential-free 3/12 Page 2 of 3

Fitting (FIG. C)

1. Remove rockers (5) carefully from touch sensor.

2. Install housing base (1) in the wall.

3. Place design frame (2) over the base and connect

touch sensor (3) to the control system.

4. Plug touch sensor (3) into the base (1).

5. Fasten touch sensor to the base using only the

screws supplied (4)..

6. Slide inscription foil (6) into the touch sensor be-

tween the lateral guides.

Important: If necessary, label foil (6) before fitting.

7. Snap rockers (5) onto the touch sensor.

Removal (FIG. D)

1. Use your thumb and index finger to hold the rocker

on the right and left side.

2. Slide the rocker to the right (1) (or to the left) and

then pull forwards (2) on the right or left side.

3. Loosen the retaining screws

4. If other devices are installed under the same frame

(e.g. socket outlets), they must be detached from

the base as well.

5. Withdraw the touch sensor from the base.

Important: Without the retaining

screws the device will not function

properly.

Safety warnings

Attention:Electricalequipmentmustbe installed

and fitted by qualified electricians only.

Failure to observe any of the installation instruc-

tions may cause damage to the device and result

in fire and other hazards.

This device is a safety class III device. Never con-

nect to voltages other than 24 V SELV circuits

(no mains potential !!).

GIRA

Info Touch sensor 2, 24 V potential-free

Installation Instructions

Touch sensor 2, 24 V potential-free 3/12 Page 3 of 3

Technical data

Touch sensor rated

voltage: AC/DC 24 V SELV

LED rated voltage: DC 24 V SELV

Contact current: max. 20 mA per contact

LED current: approx. 1 mA per LED

Connection: 2 x terminal block 9-pole

0.4...0.8 mm single-wire

Power consumption: max. 0.2 W (all LEDs on)

Type of protection: IP 20

Safety class: III

Ambient temperature: -5 °C ... +45 °C

Storage / transport

temperature: -25 °C ... +70 °C

Warranty

The warranty is provided in accordance with statutory requirements via the specialist trade.

Please submit or send faulty devices postage paid together with an error description to your responsible sales-

person (specialist trade/installation company/electrical specialist trade).

They will forward the devices to the Gira Service Center.

Giersiepen GmbH & Co. KG

Electrical Installation

Systems

P.O. Box 12 20

42461 Radevormwald

Germany

Phone +49 (0) 21 95 / 602 - 0

Fax +49 (0) 21 95 / 602 - 191

www.gira.com

[email protected]

Autres manuels Gira Accessoires

Gira

Gira KNX 5011 00 Manuel utilisateur

Gira

Gira 1025 00 Manuel utilisateur

Gira

Gira 1170 Series Manuel utilisateur

Gira

Gira 1117 00 Manuel utilisateur

Gira

Gira 2688 Series Manuel utilisateur

Gira

Gira Observer 110 Manuel utilisateur

Gira

Gira Observer 70 Manuel utilisateur

Gira

Gira System 55 Pushbutton sensor 4 Standard Manuel utilisateur

Gira

Gira 5466 02 Manuel utilisateur

Gira

Gira 5068 00 Manuel utilisateur

Gira

Gira CO2-Sensor Manuel utilisateur

Gira

Gira System 106 Manuel utilisateur

Gira

Gira KNX/EIB Manuel utilisateur

Gira

Gira 5472 02 Manuel utilisateur

Gira

Gira 5111 00 Manuel utilisateur

Gira

Gira EDA 3902 F Manuel utilisateur

Gira

Gira 0384 00 Manuel utilisateur

Gira

Gira 5466 02 Manuel utilisateur

Gira

Gira 5461 02 Manuel utilisateur

Gira

Gira 0873 00 Manuel utilisateur

Gira

Gira 5112 00 Manuel de l'opérateur

Gira

Gira 5472 02 Manuel utilisateur

Gira

Gira 5471 00 Manuel utilisateur

Gira

Gira 234902 Manuel utilisateur

Manuels Accessoires populaires d'autres marques

Hillco

Hillco 2810 Manuel utilisateur

Siemens

Siemens QSA2700D Manuel de l'opérateur

Contours

Contours ZY024 Manuel utilisateur

Saivod

Saivod VS621 Manuel utilisateur

Virtuox

Virtuox VirtuCLEAN 2.0 Manuel utilisateur

SCE

SCE ENVIRO-THERM SCE-TE170B24VSS Manuel utilisateur

Z-Wave

Z-Wave HSD-200Z Manuel utilisateur

turck

turck FMX-IM-2UPLI63FX Manuel utilisateur

Decagon Devices

Decagon Devices 10HS Manuel utilisateur

UPPAbaby

UPPAbaby Cup Holder Manuel utilisateur

Elko

Elko SmartSensor Leakage Wireless Manuel utilisateur

Grizzly

Grizzly H8371 Manuel utilisateur

Panasonic

Panasonic HG-T Series Manuel utilisateur

IFM Electronic

IFM Electronic Efector 250 Series Guide de référence

DigiDesign

DigiDesign 888/24 I/O Manuel utilisateur

PROZIS

PROZIS QUAY Manuel utilisateur

patagonia

patagonia PSI Vest Manuel utilisateur

SFC Energy

SFC Energy EFOY GO! Manuel utilisateur