Gilson ASPEC GX-274 Guide de référence

Gilson,Inc. | PO Box 620027 | Middleton, WI 53562-0027 | Tel: 608-836-1551 OR 800-445-7661 | Fax: 608-831-4451

GilsonS.A.S. | 19, avenue des Entrepreneurs | BP 145, F-95400 Villiers-le-bel, FRANCE

www.gilson.com | sales@gilson.com | ser[email protected] | [email protected]

Installation Qualication Procedures

GX-274 ASPEC™

LT375011-02 | Page 1 of 5

The Installation Qualication (IQ) procedures are aimed at end users who are implementing GLP-type requirements

and can be readily incorporated into proprietary Standard Operating Procedures (SOPs).

1. Instrument Identication

Manufacturer

Gilson, Inc.

3000 Parmenter Street

PO Box 620027

Middleton, WI 53562-0027 USA

Instrument Name Serial Number*

GX-274 ASPEC™

Z-Arm

GX Rinse Pump (Optional)

*Refer to the shipping label, located on each shipping container, for this information. Check that it matches the serial number on the instrument.

Page 2 of 5 LT375011-02GX-274 ASPEC™ Installation Qualiﬁcation

Supplier

Organization

Address

Phone Number

Fax

Service Technician

User

Organization

Department

Site (Room)

Date of Installation

Primary Contact

Name

Phone

E-Mail

Page 3 of 5 LT375011-02GX-274 ASPEC™ Installation Qualiﬁcation

2. Pre-Installation

Instrument Description

The GX-274 ASPEC™ is a single-probe X/Y/Z liquid handler that when paired with a VERITY® 4060 Single Syringe

Pump or VERITY® 4260 Dual Syringe Pump can automate liquid handling procedures and solid phase extraction (SPE)

procedures that use positive pressure elution for cartridge-based applications.

For technical specications for the GX-274 ASPEC, refer to the Chapter 1, Introduction in the GX-274 ASPEC™ User’s

Guide.

Unpacking

When unpacking the instrument, check the contents against the information listed under the Unpacking heading in

Chapter 1, Introduction in the GX-274 ASPEC™ User’s Guide.

Retain all packing material so the GX-274 ASPEC may be shipped safely in the future.

Installation Site Requirements

Technical Speciﬁcation Deﬁnition

Power Requirements 50 to 60 Hz

Voltage: 100 to 240V (Universal Input)

Current

Rating

2A for 100 to 120V

1A for 220 to 240V

Power Consumption: 250W (Maximum)

Temperature Range 5C° to 40°C

Dimensions

(W x D x H)

59.7 x 54.1 x 57.1 cm (23.5 x 21.3 x 22.5 in.)

NOTE

Dimensions do not include the VERITY® 4260 Dual Syringe

Pumps.

NOTE

The height dimension does not include the Z-arm, which

will vary depending on where the Z-arm is clamped.

Page 4 of 5 LT375011-02GX-274 ASPEC™ Installation Qualiﬁcation

Documents

In addition to this document, the following are provided. For reference purposes, specify the storage location for each.

LT26140CD ASPEC™ Systems Documentation CD

LT375011 GX-274 ASPEC™ IQ Procedures

LT310180 QC Checklist - GX-274 ASPEC™

LT310181 QC Checklist - GX-274 ASPEC™ Z-Drive

LT255565 GX-274 ASPEC™ - China RoHS

LT255568 GX-274 ASPEC™ System Setup Overview

LT312270 GX-274 ASPEC™ Declaration of Conformity

LT315018 Unpacking Instructions

3. Installation

Locator Plate Setup

Refer to the appropriate procedures in Chapter 2, Installation in the GX-274 ASPEC™ User’s Guide.

Z-Arm Setup

Refer to the appropriate procedures in Chapter 2, Installation in the GX-274 ASPEC™ User’s Guide.

Plumbing Connections

Refer to the appropriate procedures in Chapter 2, Installation in the GX-274 ASPEC™ User’s Guide.

Rear Panel Connections

Refer to the appropriate procedures in Chapter 2, Installation in the GX-274 ASPEC™ User’s Guide.

Page 5 of 5 LT375011-02GX-274 ASPEC™ Installation Qualiﬁcation

Start Up

Refer to the appropriate procedures in Chapter 3, Operation in the GX-274 ASPEC™ User’s Guide.

GX-27X Series Oset Utility

Refer to Chapter 3, Operation in the GX-274 ASPEC™ User’s Guide for information on running the GX-27X Series Oset

Utility (part number 2604710).

4. Firmware Version

To obtain the rmware version for your records:

1. Install the Gilson Ethernet Utility. Refer to its documentation, if necessary.

2. Start the Gilson Ethernet Utility. Click the Start button and then select: All Programs > Gilson Applications > Utilities > Gilson

Ethernet Utility.

3. Select GX 274 ASPEC from the list and then click Connect.

4. Record the rmware version, which is displayed in the “Prom Version” column.

Instrument Name Firmware Version*

GX-274 ASPEC™

5. Acceptance

If no installation problems were detected or installation problems that were detected were resolved, have the local

Gilson representative who installed the GX-274 ASPEC provide the information requested below.

Name

Organization

Signature

Date

End user was provided with a copy of this document.

Table des matières

Autres manuels Gilson Équipement de laboratoire

Gilson

Gilson 223 Manuel utilisateur

Gilson

Gilson MC-250 Series Manuel utilisateur

Gilson

Gilson Gilson Test-Master TM-5 Manuel utilisateur

Gilson

Gilson 333 Manuel utilisateur

Gilson

Gilson CENTRY 103 Minicentrifuge Manuel utilisateur

Gilson

Gilson ASPEC GX-271 Manuel utilisateur

Gilson

Gilson Pipetting Aid Manuel utilisateur

Gilson

Gilson pipetman Manuel utilisateur

Gilson

Gilson PIPETMAN P20 Manuel utilisateur

Gilson

Gilson Pipetman Classic Series Manuel utilisateur

Gilson

Gilson MyPipetman P2 Manuel utilisateur

Gilson

Gilson PIPETMAN L Manuel utilisateur

Gilson

Gilson PIPETMAN F Series Manuel utilisateur

Gilson

Gilson Extractman Manuel utilisateur

Gilson

Gilson macroman Manuel utilisateur

Gilson

Gilson ASPEC GX-271 Manuel

Gilson

Gilson PIPETMAN Neo P2N Manuel utilisateur

Gilson

Gilson PIPETMAN P Manuel

Gilson

Gilson ASPEC GX-271 Manuel utilisateur

Gilson

Gilson CENTRY 103 Minicentrifuge Manuel utilisateur

Gilson

Gilson Pipetman Fixed Manuel utilisateur

Gilson

Gilson pipetman Manuel utilisateur

Gilson

Gilson Safe Aspiration Manuel utilisateur

Gilson

Gilson Trackman Manuel utilisateur

Manuels Équipement de laboratoire populaires d'autres marques

Qiagen

Qiagen DML 3000 Manuel utilisateur

Queensgate

Queensgate NANOSCAN OP400 Manuel de programmation

Conviron

Conviron GEN1000-GE Manuel utilisateur

Parr Instrument

Parr Instrument 4560 Mode d’emploi

IKA

IKA IC control Manuel utilisateur

Integra

Integra DOSE IT Manuel utilisateur

Agilent Technologies

Agilent Technologies 5800 ICP-OES Manuel utilisateur

Endress+Hauser

Endress+Hauser Cleanfit CPA875 Manuel utilisateur

NI PXI-5422 Manuel

Collomix

Collomix Aqix Manuel utilisateur

SPEX SamplePrep

SPEX SamplePrep 6875 Freezer/Mill Series Manuel utilisateur

Ocean Insight

Ocean Insight FLAME-NIR+ Manuel utilisateur

Parker

Parker ALIGN-MG-NA Manuel utilisateur

BD 644787 Manuel utilisateur

DENTAURUM

DENTAURUM Compact Megaplus Manuel utilisateur

Biuged Laboratory Instruments

Biuged Laboratory Instruments BGD 626 Manuel utilisateur

VWR

VWR SAS Super IAQ Manuel utilisateur

illumina

illumina MiSeqDx Manuel utilisateur