Gigabyte GN-GSV2401S Manuel utilisateur
GN-GSV2401S
SWITCHING HUB USER GUIDE
Gigabyte Ethernet Switching Hub with 24 10/100 Mbps Fast Ethernet Ports
plus 2 Gigabit Ports
Rev. 1.0
Copyright ©2003 Gigabyte Technology Co., Ltd. All Rights Reserved.
FCC Warning
This equipment has been tested and found to comply with the limits for a Class A
digital device, pursuant to Part 15 of the FCC Rules. These limitations are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user is encouraged to
try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into a different outlet from the one the receiver is
connected to.
• Consult your local distributors or an experienced radio/TV technician for help.
• Shielded interface cables must be used in order to comply with emission limits.
Changes or modifications to the equipment, which are not approved by the party
responsible for compliance, could affect the user’s authority to operate the
equipment.
CE Mark Warning
This is a Class A product. The product may cause radio interference in a domestic
environment or residential area. If interference does occur, the user may need to
take appropriate actions to counteract this interference.
Copyright ©2003 All Rights Reserved.
This publication, including all photographs, illustrations and software, is protected
under international copyright laws, with all rights reserved. Neither this manual,
nor any of the material contained herein, may be reproduced without the express
written consent of the manufacturer.
Disclaimer
The information in this document is subject to change without notice. The
anufacturer makes no representations or warranties with respect to the contents
hereof and specifically disclaims any implied warranties of merchantability of
fitness for any particular purpose. Furthermore, the manufacturer reserves the
right to revise this publication and to make changes from time to time in the
content hereof without obligation of the manufacturer to notify any person of such
revision or changes. Gigabyte has an on-going policy of upgrading its products
and it may be possible that information in this document is not up-to-date. Please
check with your local distributors for the latest information. No part of this
document can be copied or reproduced in any form without written consent from
the company.
Trademarks
All trade names and trademarks are the properties of their respective companies
and are acknowledged.
Contents
CHAPTER 1 GETTING STARTED ........................................................................................... 1
1.1 UNPACKING INFORMATION CHECKING YOUR ITEMS .................................................. 2
1.2 HOW TO USE THIS GUIDE............................................................................................ 3
CHAPTER 2 INTRODUCTION TO THE GIGABYTE 2+24 PORTS 10/100/1000
MBPS GIGABYTE SWITCHING HUB ...................................................... 4
2.1 GENERAL DESCRIPTION ............................................................................................. 5
2.2 KEY FEATURES........................................................................................................... 6
2.3 THE FRONT PANEL ..................................................................................................... 7
2.4 THE REAR PANEL ....................................................................................................... 9
CHAPTER 3 INSTALLING AND USING THE GIGABYTE SWITCHING HUB10
3.1 LOCAL CONSOLE MANAGEMENT ............................................................................. 11
3.2 LOG—IN .................................................................................................................. 15
3.3 MAIN MENU ............................................................................................................ 16
3.4 SWITCH STATI C CONFIGURATION ............................................................................. 17
3.5 PORT CONFIGURATION ............................................................................................. 18
3.6 TRUNK CONFIGURATION .......................................................................................... 21
3.7 VLAN CONFIGURATION .......................................................................................... 23
3.8 MISC CONFIGURATION ............................................................................................. 31
3.9 RESTART CONFIGURATION ....................................................................................... 34
CHAPTER 4 PRODUCT SPECIFICATIONS ......................................................................36
4.1 PRODUCT SPECIFICATIONS FOR 10/100BASE-X PORT FUNCTIONS .......................... 37
4.2 PRODUCT SPECIFICATIONS FOR 10/100/1000 BASEX PORT FUNCTIONS.................. 37
4.3 PRODUCT SPECIFICATIONS FOR SWITCHING FUNCTIONS .......................................... 37
4.4 PRODUCT SPECIFICATION FOR MANAGEMENT FUNCTIONS....................................... 38
4.5 PHYSICAL SPECIFICATION ........................................................................................ 38
1
Chapter 1 Getting Started
2
1.1 Unpacking Information, Checking Your Items
Thank you for purchasing this powerful, high-performance Gigabyte 2+24 ports
10/100/1000 Mbps Gigabyte Switching Hub. Before getting started, please check
the package to make sure all the following items are included.
The package should include the following:
• Gigabyte GN-GSV2401S Switching Hub
• AC power cord
• User’s Guide for the Gigabyte Switching Hub
• Mounting Kit containing:
- Rubber feet for placing the switching hub on a table or flat surface
- Two mounting brackets
- Screws for attaching the brackets to the switching hub
- Power cables
If you are missing any of the items listed above, please contact your local
distributor or authorized reseller.
Figure 1.1 The Gigabyte GN-GSV2401S Switching Hub
3
1.2 How to use this Guide
The Gigabyte GN-GSV2401S User’s Guide is divided into the follow chapters:
• Chapter 2, Introduction contains a general description and key functions of
the 2+24 ports 10/100/1000 Mbps Gigabyte Switching Hub.
• Chapter 3, Installation explains the set-up procedures to make the gigabyte
switching hub operational.
• Chapter 4, Product Specifications contains information about the technical
aspects of the gigabyte switching hub.
• Appendices, including Contact Information and Warranty Statement. Read
only if necessary.
4
Chapter 2 Introduction to the
Gigabyte 2+24 Ports 10/100/1000
Mbps Gigabyte Switching Hub
5
2.1 General Description
The Gigabyte GN-GSV2401S is a powerful, high-performance, Fast Ethernet
switching hub, which acts as traffic controller for 24 local routes and 2 highways to
connect your networks to other outside networks.
With all 24 ports capable of 10 or 100 Mbps auto-negotiation operation (NWay)
and 2 Gigabit Ethernet uplink ports, the switching hub can automatically negotiate
with the connected partners for the network speed and duplex mode. It is ideal for
micro-segmenting large networks into smaller, connected subnets for improved
performance, enabling bandwidth-demanding multimedia, imaging and database
applications. Moreover, the 10/100Mbps auto-sensing ability provides an easy
way to migrate 10Mbps to 100 Mbps network with ease. Compared to the shared
10Mbps or 100Mbps networks, the switching hub delivers a dedicated
10/100Mbps connection to every attached client with no bandwidth congestion
issues and the most cost-effective way to invest in your network’s performance in
the long run.
Store-and-forward switching mode guarantees low latency, plus eliminates all
network errors, including runt and CRC error packets. To work under fullduplex
mode, transmission and reception of the frames can occur simultaneously without
causing collisions, as well as doubling the network bandwidth.
The switching hub is plug-and-play without needing any software to configure,
and is also fully compliant with all kinds of network protocols. Moreover, the
abundant diagnostic LEDs on the front-panel provide the operating status of
individual ports and the entire system.
6
2.2 Key Features
The Gigabyte Switching Hub provides the following key features:
• Twenty-four non-blocking 10/100 Mbps Auto-negotiation Ethernet ports
• Two non-blocking 10/100/1000 Mbps Auto-negotiation Ethernet ports
• Full or Half duplex transfer mode for each port
• Complies with the Flow Control support for Full-duplex specifications of the
IEEE802.3x standard
• Complies with Port-Based VLAN, tag based VLAN with either IVL or SVL
support specifications of the IEEE802.1q standard
• Complies with Two-Level priority Queuing support specifications of the
IEEE802.1p standard
• Complies with Rapid Reconfiguration for fast address migration to support
specifications of the IEEE802.1w standard
• Supports static Port Trunking
• Supports Store-and-Forward switching scheme
• Prevents Head of Line (HOL) blocking
• Supports 14K Mac address table, 4K VLAN table entries
• RS-232 port interface for Console management & System configuration
• Controls Ingress & Engress rate
Table des matières
Autres manuels Gigabyte Changer
Gigabyte
Gigabyte FGSD-1022VHP Manuel utilisateur
Gigabyte
Gigabyte GN-GSV2401 Manuel utilisateur
Gigabyte
Gigabyte SW008A Manuel utilisateur
Gigabyte
Gigabyte GN-GT5D Manuel utilisateur
Gigabyte
Gigabyte GN-GSV2401M Manuel utilisateur
Gigabyte
Gigabyte GN-GT8S Manuel utilisateur
Gigabyte
Gigabyte SW016A Manuel utilisateur
