Gigabyte Q35 Manuel utilisateur
English
1
English
PB Congratulations on your purchase of the GIGABYTE Notebook.
This manual will help you to get started with setting up your notebook. The nal product conguration
depends on the model at the point of your purchase. GIGABYTE reserves the right to amend without
prior notice. For more detailed information, please visit our website at www.gigabyte.com.
2
1
3
Using GIGABYTE Notebook for the First Time
1Connect the the power cord to the AC adapter.
2Connect the AC adapter to the DC-in jack on the left side of the notebook.
3Connect the power cord to the power outlet.
To install the battery please follow these steps:
1Target the battery’s direction into the tenon-mortise.
2Circulate the battery downwards until hearing the “snap” sound to lock the battery.
3Remember to slide the switch to the “Lock” position.
Important
• Ensure that your Notebook PC is connected to a grounded power adapter before turning it on for the rst time.
• When using your Notebook PC on power adapter mode, the socket outlet must be near to the unit and
easily accessible.
• Locate the input/output rating label on your Notebook PC and ensure that it matches the input/output
rating information on your power adapter. Some Notebook PC models may have multiple rating output
currents based on the available SKU.
• Power adapter information: Input voltage: 100-240Vac ,- Input frequency: 50-60Hz ,- Rating output
voltage: 19V, 2.1A
1
2
3
English
3
English
2
Switching on the Power
After you turn on the Notebook for the very rst time, do not turn it off until the operating system
has been congured. Please note that the volume for the audio will not function until Windows®
Setup has completed.
Booting Up the Notebook for the First Time
Depending on your conguration, the Microsoft®Windows® Boot Screen will be the rst screen that
you will see as the notebook starts up. Follow the on-screen prompts and instructions and enter
your personal information to complete the setup of the Windows®Operating System.
English
3
English
2
Top View
Left View
2 3
1
4
5
6
1 2 3 4 6
5 7
1Kensington Lock Port
2DC-In Jack
3HDMI Port
4USB 3.0
5USB 3.0(TYPE C)
6Microphone Jack
7Headphone&S/PDIF-Out Jack
Your GIGABYTE Notebook Tour
1Webcam
2Webcam on/off Indicator
(The indicator will be white while
the webcam on)
3Microphone
4Power Button
5TouchPad
6LED Indicators
Power on/Suspend Status
Battery Status LED
Airplane Mode Status LED
HDD Status LED
English
5
English
4
Right View
1USB 2.0
2Flash Memory Card Reader
3D-sub (VGA) Port
4RJ-45 LAN Jack
1 2 3 4
Bottom View
1Battery
2Speakers
1
2
Warning:
●
● Do not install the Notebook PC on a slant or a place prone to vibrations, or avoid using the Notebook PC in that
location for a long time.This increases the risk that a malfunction or damage to the product will occur.
●
●Do not store and use Notebook PC in direct sunlight or the location where temperatures exceed 112°F (45°C) such
as inside a vehicle.There is a danger of Lithium-ion battery expansion and aging.
●
● Do not use the Notebook PC in a badly ventilated location such as on bedding, on a pillow or cushion, etc, and do
not use it in a location such as room with oor heating as it may cause the computer to overheat.Take care that the
Notebook PC vents (on the side or the bottom) are not blocked especially in these environments. If the vents are
blocked, it may be dangerous and cause the Notebook PC to overheat.
English
5
English
4
The computer employs hotkeys or key combinations to access most of the computer’s controls like
screen brightness and volume output. To activate hotkeys, press and hold the <Fn> key before
pressing the other key in the hotkey combination.
Hotkey Description
Fn+~ Play/ Pause(in Audio/Video Programs)
Fn+F1 Touchpad Toggle
Fn+F2 Backlit Keyboard Toggle
Fn+F3 Mute Toggle
Fn+F5/F6 Volume Decrease/Increase
Fn+F7 Display Toggle
Fn+F8/F9 Brightness Decrease/Increase
Fn+F10 PC Camera Power on and off
Fn+F11 Airplane Mode Toggle
Fn+F12 Sleep Toggle
Fn+ NumLK Number Lock Toggle
Fn+ScrLK Scroll Lock Toggle
Caps Lock Caps Lock Toggle
Hotkeys
English
7
English
6Smart USB Backup Guide (Original: Recovery Image USB)
WARNING
●You can backup original recovery image through this application in case of losing by device damage.
● You can backup original recovery image to USB disk and restore the system if any storage system
replacement with the recovery USB disk.
● Before you restore the system through the recovery USB disk, please make sure that you have already
made the backup of your data.
●Please DO NOT shut down or un-plug the system when performing backup through recovery USB disk.
1
>20G
• Please plug in the USB disk which is
at least 20GB in capacity to make the
original image (backup the data in USB
rst. All data will be eliminated during
the creation of recovery USB disk)
2
• Insert the driver disk to your optical
drive and run the install of “Smart USB
Backup” (for none-ODD model, please
use USB ODD device or download
from http://www.gigabyte.com
3
• Run the “Smart USB Backup” after
nishing the install.
4
• Select your USB disk from the drop-
down list and start to create the
recovery USB disk.
5
• The window will pop out when the creation of recovery disk is done.
• Please press F12 on starting the system when you need to restore the system. Select
“boot from recovery USB disk” and the system will be restored.
• The time needed for restore will be around 30 mins(time needed may vary by USB disk
model) .
English
7
English
6
System Recovery (Restore your laptop operating system)
When something is going wrong with the laptop operating system, the storage of the laptop has
a hidden partition containing a full back up image of the operating system that can be used to
restore the system to factory default settings.
All ready to go
Make sure your PC is plugged in. This will take a few minutes.
Recovery Guide
Note
˙If the storage has been switched or the partition deleted, the recovery option will no longer be
available and a recovery service will be needed.
˙The recovery function is only available on devices with O/S preinstalled. Devices with DOS do not
have the recovery function.
Launch System Recovery
The system recovery feature is preinstalled before the laptop is shipped from the factory. The
option menu allows you to launch the Windows recovery tool to reinstall the operating system to
factory default.
The brief introduction below will show you how to start the recovery tool and restore your system.
Windows 10 Recovery Guide
During the laptop turn on process, press and hold F9
key to launch the tool.
2
1Turn off and restart the laptop.
3
There are two options for system recovery
˙Reset this PC
You can choose to keep or remove your files and then reinstalls Windows
without losing your les.
˙GIGABYTE Utility
Your PC settings will be restored to factory default settings.
Caution: All personal data and les will be lost.
Choose “Troubleshoot” to enter the recovery settings. (Also you can choose
“Continue” to exit recovery system and continue to Windows 10 for files or
data backup.)
English
9
English
8
Here are what will happen
˙All of your personal les and apps will be removed.
˙Your PC settings will be restored to pure O/S (without GIGABYTE app) .
4
▓Choose “Reset this PC”
Keep my les
Choose an account to continue.All apps will be removed, and settings
will back to pure O/S (without GIGABYTE app), but your personal les
will be kept.
Remove everything
All apps, setting and personal les will be removed.
▓Choose “GIGABYTE Utility”
Just remove my les
Only personal data and les will be removed, but computer settings will
be kept.
Fully clean the drive
The drive will be completely restored to factory default settings. It takes
more time. > [Click on “Reset” to execute recovery function.]
Caution
˙Once the “Recovery” is selected, your personal data and les will be deleted
after the laptop starts restoring, and the operating system will be reset to
factory default settings.
˙A progress indicator bar will show on the window when the recovery process is
running. Please make sure the AC-adapter is plugged in and do not turn off the
laptop.
The recovery will be activated and you will see the
option buttons on the window. Click on “Yes” to start it.
After the system recovery is completed, you will see
the option button on the window, please click on
“Shutdown”.
English
9
English
8
▓Advanced options
System Restore
Use a restore point recorded on your PC to restore Windows.
System Image Recovery
Recover Windows using a specic system image le.
Startup Repair
Fix problems that keep Windows from loading.
Command Prompt
Use the Command Prompt for advanced trobleshooting.
UEFI Firmware Settings
Change settings in your PC’s UEFI rmware.
Startup Settings
Change Windows Startup behavior.
Table des matières
Autres manuels Gigabyte Ordinateur portable
Gigabyte
Gigabyte AORUS X5 v8 Manuel utilisateur
Gigabyte
Gigabyte Q2542C Manuel utilisateur
Gigabyte
Gigabyte G5 Manuel utilisateur
Gigabyte
Gigabyte AORUS 15X ASF Manuel utilisateur
Gigabyte
Gigabyte U21 Manuel utilisateur
Gigabyte
Gigabyte Aorus X5 Manuel utilisateur
Gigabyte
Gigabyte JCK2230BNH Manuel utilisateur
Gigabyte
Gigabyte T1132 Manuel utilisateur
Gigabyte
Gigabyte AORUS 17X Manuel utilisateur
Gigabyte
Gigabyte Q21 Manuel utilisateur
Gigabyte
Gigabyte Q1458 Manuel utilisateur
Gigabyte
Gigabyte P15 Manuel utilisateur
Gigabyte
Gigabyte X5 v8 Manuel utilisateur
Gigabyte
Gigabyte W511 Series Manuel utilisateur
Gigabyte
Gigabyte XB-8US5150SP Manuel utilisateur
Gigabyte
Gigabyte W451U Manuel utilisateur
Gigabyte
Gigabyte Q2442 Series Manuel utilisateur
Gigabyte
Gigabyte P17F R5 Manuel utilisateur
Gigabyte
Gigabyte U2142 Manuel utilisateur
Gigabyte
Gigabyte Q2440 Manuel utilisateur
