Gianni Industries ML-400M Manuel utilisateur

ML-400 Electric Lock

Specifications

Operating Voltage: 12 ~ 24 VDC/AC

Current Draw: 280mA/12VDC; 180mA/24VDC

Locking Mode: Fail-Safe

Operating Temperature: -10°C~+49°C

Humidity: 0~85% non-condensing

Applicable to horizontal and vertical installation

For single/double action swing doors

Latch Throw: 16mm

Endurance Rating: 250,000 cycles (Factory tested)

Static strength: 1,500 lbs

Preload: 500 lbs of pressure strength

Mortise Mount Model Dimensions

Unti:mm

ML-400 Series Models

ML-400M: Mortise mount

ML-400MSMB: Surface mount

ML-400MVGL: Surface mount

Installation Instruction

(for frameless glass doors & walls)

Wiring Diagram

Door Status Output:

12~24VDC/AC

1A/125VAC

Red: +

Black: -

Blue: N.O.

Green: COM.

Yellow: N.C.

Using crimper or pliers and pressing the header

of connector down to even position.

Butt Splice (IDC) Connector

Strike Plate Dimensions

ML-400M

210

160

40.5

185

KP-ML-400-D KP-ML-400-F

KP-ML-400-E

KP-ML-400-A KP-ML-400-B KP-ML-400-C

210

185

100

210

185

100

210

185

150

12 5

100

150

12 5

100

150

12 5

Complete assembly

4-1

5-1 5-2 5-3 5-4 5-5

Surface Mount Model Dimensions

ø5.2mm

23.5

210

ø5.2mm

210 23.5

ø5.2mm

Mortise Mount Installation Unti:mm

210

23.5

210 23.5

ø5.2mm

ø5.2mm ø5.2mm

or leaf

Frame

Attention! Please ensure that the

template is the correct way up.

Alignment CL

Align the center line (CL) of the lock

body template with the CL of the door

leaf. Ensure the CL of the strike plate

template matches the lock body CL as

closely as possible.

Cut out mortise holes for the lock

body and strike plate and drill

holes according to the templates. Tighten the fixing lugs with

screws.

Connect power cable to the lock

and test before screwing to the

door leaf. Affix the strike plate.

Unti:mm

ML-400MSMB

32.5

200

180

oor

Door Loop

(Optional)

The door loop protects the wiring

from damage at the door hinge.

32.5

200

180

4-2

Surface Mount Installation

Glass Mount Model Dimensions

53.5

212

53.5

212

Unti:mm

M6 x 25 Screw











ML-400MVGL

Door Leaf

Door Freme

Blind Nut

Interior/Secured Side

4-3

Glass Mount Installation

Frameless Glass Wall

Spacer

Set Screws

Frameless Glass Door (10 to 13 mm thick)

Spacer

1.It is recommended to attach the spacers to the interior/secured side of the door.

2.Tighten the set screws firmly but do not overtighten to cause damage to the glass.

3.The glass thickness should be 10~13 mm. The bracket can be adjusted to properly align the position of strike plate and lock body depending on the door

gap ranging from 6 to 10 mm.

1.Confirm the installation location and clean the surface of the glasses.

2.Take off the sticker on the back side of the spacer and attach the space to the glass. Add more spacers if needed per glass thickness. Use silicone sealant

or other adhesives to secure the bracket firmly.

3.Tighten the set screws with an Allen wrench, secure the electric lock to the glass bracket, and then install the cover.





4-4

Table des matières

Autres manuels Gianni Industries Verrouillage

Gianni Industries

Gianni Industries EM-150M Manuel utilisateur

Gianni Industries

Gianni Industries 10003F Manuel utilisateur

Gianni Industries

Gianni Industries EM-600 Manuel utilisateur

Gianni Industries

Gianni Industries Electromechanical Lock Manuel utilisateur

Gianni Industries

Gianni Industries 10040DS Manuel utilisateur

Gianni Industries

Gianni Industries EM-1200 Manuel utilisateur

Gianni Industries

Gianni Industries 10000ST Manuel utilisateur

Gianni Industries

Gianni Industries 10020 Manuel utilisateur

Gianni Industries

Gianni Industries EB-195 Manuel utilisateur

Gianni Industries

Gianni Industries EM-NH300 Manuel utilisateur

Gianni Industries

Gianni Industries Gk300 Series Manuel utilisateur

Gianni Industries

Gianni Industries GS250 Series Manuel utilisateur

Gianni Industries

Gianni Industries EM-2200 Manuel utilisateur

Gianni Industries

Gianni Industries EB-220-32 Manuel utilisateur

Gianni Industries

Gianni Industries EM-750 Manuel utilisateur

Gianni Industries

Gianni Industries 10010ST Manuel utilisateur

Gianni Industries

Gianni Industries EM-NH350 Manuel utilisateur

Gianni Industries

Gianni Industries 10003M Manuel utilisateur

Gianni Industries

Gianni Industries EB-200N Manuel utilisateur

Gianni Industries

Gianni Industries P Series Manuel utilisateur

Gianni Industries

Gianni Industries ML-210 Manuel utilisateur

Gianni Industries

Gianni Industries 10006S Manuel utilisateur

Gianni Industries

Gianni Industries EB-400 Manuel utilisateur

Gianni Industries

Gianni Industries Mortise Series Manuel utilisateur

Manuels Verrouillage populaires d'autres marques

Magic

Magic 105 Manuel utilisateur

Gantner

Gantner GAT NET.Lock 7020 System Guide rapide

Wittkopp

Wittkopp Insys 7202 Manuel utilisateur

Dorma

Dorma Studio Classic Manuel utilisateur

Securam

Securam ECSL-601 Manuel utilisateur

Sudhaus

Sudhaus 3003 Manuel utilisateur

Safety 1st

Safety 1st 48517 Manuel utilisateur

Pado

Pado FDS-10 Manuel utilisateur

Esco

Esco systeQ Series Manuel utilisateur

COMPX

COMPX National D8951 Manuel utilisateur

secureo

secureo Key Box Manuel utilisateur

Stock Loks

Stock Loks C8713 Manuel utilisateur

COMPX

COMPX 1T-058 Manuel du propriétaire

Auslock

Auslock T11 Manuel utilisateur

ELCOM

ELCOM 7205 Manuel utilisateur

Stealth SAFES

Stealth SAFES ShadowVault Manuel utilisateur

Knox

Knox KeySecure 5 Manuel utilisateur

Kwikset

Kwikset 48334/01 Manuel utilisateur