geratech EGE-MSI-16x16 Manuel utilisateur
geratech®
EGE-M
S
I-1
6
x1
6
M
odüler
M
at
r
ix
(
HDCP - 4Kx2K
)
EGE-MSI-16x16 Modüler
Matrix
(HDCP - 4Kx2K)
www.geratech.com.tr
geratech®
EGE-MSI-16x16 Modüler Matrix
CONTENTS
1. Introduction............................................ 1
2. Applications........................................... 1
3. Package Contents ................................ 1
4. System Requirements............................ 1
5. Features.................................................. 2
6. Operation Controls and Functions....... 3
6.1 Front Panel ........................................3
6.2 Rear Panel.........................................5
6.3 RS-232 Protocols ...............................6
6.4 RS-232 & Telnet Command.............7
6.5 Telnet Control ...................................9
6.6 Web GUI Control ............................11
7. Connection Diagram .......................... 13
...................................... 14
...18
9. Acronyms ............................................. 18
www.geratech.com.tr
geratech®
EGE-MSI-16x16 Modüler Matrix
1. INTRODUCTION
The Modularized Matrix series are designed to route the signal of 16
sources to any connected 16 displays, providing resolution up to Full
HD 1080p/4Kx2K and WUXGA (1920x1200@60HzRB). Besides the regular
matrix functionality, the matrix models are very attractive to the
modularization design these models can be setup as a matrix of HDMI,
DVI-D, CAT5e/6/7, VGA or their any combinations (count with eight,
for example, a matrix with 8-HDMI-in/8-DVI-IN and 8-HDMI-OUT/8-DVI-
OUT), all you need to do is to swap the input or output modules as you
wish. Refers to section 8 for available module boards.
2. APPLICATIONS
Public information display
Educational demo
Professional Presentation
Advertising display
Hospital Operation Room
3. PACKAGE CONTENTS
1 x Enclosure of Modularized 1616 Matrix (including control board, &
powers)
2 x Input Module Board of HDMI/DVI/CAT5e/6/7 or VGA(Optional)
2 x Output Module board of HDMI/DVI/CAT5e/6/7 (Optional)
2 x Power Cord
Operation manual
4. SYSTEM REQUIREMENTS
Input source equipments like PC/Laptop/DVD/Blu-ray players output
display TV/monitor or CAT5e/6/7 to HDMI receivers.
1
www.geratech.com.tr
geratech®
EGE-MSI-16x16 Modüler Matrix
2
5. FEATURES
HDMI, HDCP 1.1 and DVI 1.0 compliant
Changeable input and output boards
Input and output module types can be mixed and added in
increment of 8 from 8x8 up to 16x16 with HDMI, DVI, CAT5e/6/7 and
VGA interfaces
Supports LPCM 7.1CH, Dolby TrueHD, Dolby Digital Plus and DTS-HD
Master Audio transmission
Supports a wide range of PC and HDTV resolutions from VGA to
WUXGA and 480i to 1080p or 4Kx2K
Supports RS-232, Telnet and Web GUI controls
Supports redundant power supply
HDMI cable length with a resolution 1080p/8bits&12bits the Input/
Output source can be 15m/15m(8bits) and 10/10m(12bits) away
EDID modes:
a. Standard mode: Factory Default
b. Automatic mode: Taking EDID from the lowest output port
c. Manual mode: Can assign any output to any input port
CAT5e/6/7 cable length with a resolution 1080p/8bits&12bits the
Input/Output source can be 100m/100m away
5PlayTM convergence: Video, Audio, PoE, Ethernet & Control (IR &
RS-232)
4Play convergence: Video, Audio, PoE & Control (IR & RS-232)
3Play convergence: Video, Audio & Control (IR & RS-232)
www.geratech.com.tr
geratech®
EGE-MSI-16x16 Modüler Matrix
3
6. OPERATION CONTROLS AND FUNCTIONS
6.1 Front Panel
POWER RETURN 789LOCK
MENU
PAGE 654 SAVE
3
2
1RECALL
ALL
PAGE +
0
OUT/IN ENTER
LOCK
STANDBY
2
7
8
9
3
1
6
5
4
10 11 12 13
1POWER button & LED: Press this button to turn On the device or
press it again to switch to standby mode. The LED will illuminate
the temperature inside is too high and air circulation is highly
suggested.
2LCM: Displays the setting information of each input and output
and other setting information according to the selection.
3LOCK button & LED: Press this button to lock all the function buttons
on panel. The LED will illuminate, to unlock press it again.
4RETURN: Press this button to return back/exit the current selection.
5MENU: Press this button to enter into the menu selections of
A.EDID
1.
EDID from 1~16 ports.
2. Standard EDID: Use the built-in EDID which supports video
up to 1080p@60/WUXGA@60RB and audio supports LPCM
2CH.
www.geratech.com.tr
www.geratech.com.tr
geratech®
EGE-MSI-16x16 Modüler Matrix
4
3. Manual EDID: Support independent EDID by appoint input
and output ports.
B. IP
1. IP address,
2. Netmask,
3. Gateway.
C. Temperature
1. Temperature 1,
device inside.
D. LCM Contrast Range from 1~4
6PAGE:
displaying the current I/O status or when entering into the menu for
detail selection.
7SAVE: Press this button to save the present setting of the I/O. There
are 3 sets available for saving.
8RECALL: Press this button to recall from the saving settings of 1~3.
9ENTER:
selection.
10 ALL: Press this button to select all outputs to one input.
11 OUT/IN: Press this button to select input source to displaying on
output display. The sequence should be OUT/INnumber(s) for
output sourceOUT/INa number for input displayEnter.
12 0~9: Press these numbers when selecting input output ports.
13 +: Press this button when selecting more than one output for an
input selection. This button works correspondingly with OUT/IN
button only.
www.geratech.com.tr
geratech®
EGE-MSI-16x16 Modüler Matrix
5
6.2 Rear Panel
RS232 CONTROL IR ALL
OUT IN
SERVICE OUTPUT 0
IR IN
4 5
1
2
3
Note: The above panel is an illustration of HDMI I/O.
1OUTPUT 1~16: Connect to HD or 3D TV/monitors with HDMI cables
up to 16 displays.
2CPU
a. RS-232: Connect with D-Sub 9-pin cable from the PC/Laptop
device for RS-232 control over the Matrix or the connected
device(s).
b. CONTROL: Connect to an active network line for LAN serving
and Telnet/Web GUI control.
c. IR OUT/IN: Reserved.
e. OUTPUT 0: Connect to DVI/HDMI (with DVI to HDMI adaptor)
monitor/TV for instant output image viewing.
3INPUT 1~16: Connect to source equipment such as Blu-ray/PS3
players up to 16 sets with HDMI cables.
4POWER & POWER Supply: The device will automatically turns ON
when connecting with power supply.
5Ventilation Fan: This fan will automatically turns ON when the
device is switch to ON. Do not block this port of the device or
cover it with any object. Please allow adequate space around
the unit for air circulation.
www.geratech.com.tr
geratech®
EGE-MSI-16x16 Modüler Matrix
6
6.3 RS-232 Protocols
CMSI-1616
Remote Controller
PIN PIN
1NC 1NC
2TxD 2RxD
3RxD 3TxD
4NC 4NC
5GND 5GND
6NC 6NC
7NC 7NC
8NC 8NC
9NC 9NC
Baud Rate: 19200bps
Data Bit: 8 bits
Parity: None
Stop Bit: 1
Flow Control: None
www.geratech.com.tr
geratech®
EGE-MSI-16x16 Modüler Matrix
7
Command Description
P1 Power on.
P0 Power off.
OxIy Output (x:0~16) set to input (y:1~16).
ALLOUT x All output set to input (x:01~16).
ACTIVE Report I/O active channels.
INDETECT Input channels detect indicator.
OUTDETECT Output channels detect indicator.
PORTSTATUS Report all output connection status.
HDCPON x Setting input port(x:01~16) HDCP on.
HDCPOFF x Setting input port (x:01~16) HDCP off.
HDCPONALL Setting all input port HDCP on.
HDCPOFFALL Setting all Input port HDCP off.
HDCPSTATUS Show HDCP status of all output(0=HDCP
disable,1=enable).
MUTEO x Video mute command at output
(x:0~16) interface.
UNMUTEO x Video unmute command at output
(x:0~16) interface.
MUTEI x Video mute command at input
(x:0~16)interface.
UNMUTEO x Video unmute command at output
(x:0~16) interface.
UNMUTEI x Video unmute command at input
(x:0~16) interface.
MUTEALL Mute all outputs.
UNMUTEALL Unmute all outputs.
MUTESTATUS Show mute status of all output(0=not
muted,1=muted).
www.geratech.com.tr
geratech®
EGE-MSI-16x16 Modüler Matrix
8
HPDL x Pull the input(x:01~16) Hot-Plug-Detect
signal to 'LOW'.
HPDH x Pull the input(x:01~16) Hot-Plug-Detect
signal to 'HIGH'.
HPDLALL Set all input HPD to Low.
HPDHALL Set all input HPD to High.
HPDSTATUS Report all input Hot-Plug-Detect signal
status.
EDIDMODE x y Set EDID mode(y:1~2) to Input(x:
01~16).
EDIDMODEALL x The EDID mode(x:1~2) of All Input.
EDIDPORT x y Set EDID Assigned Port(y:01~16) to
Input(x:01~16).
EDIDPORTALL x The EDID of All Inports is assigned to
Output (x:01-16).
EDIDSTATUS Report all input EDID mode&port.
UART x "str" Write UART string to output
port(x:01~16).
UARTBAUD x y Setting output port(x:01~16) UART
baud rate(y).
STATUSUART Show output port UART baud rate.
TEMPSTATUS Show temperature sensor values y1, y2.
SETIPADDR Setting IP address<x.x.x.x>.
SETSNMASK Setting subnet mask<x.x.x.x>.
SETGWADDR Setting gateway IP address<x.x.x.x>.
IPCONFIG
RSTIP
Defaults(DHCP).
BUZZER x Buzzer Mute(0),UnMute(1).
REBOOT System reboot.
SAVETO x Save as Preset x(1~10).
RECALLTO x Recall Preset x(1~10).
Table des matières
Manuels Routeur réseau populaires d'autres marques
NETGEAR
NETGEAR FS526T - Switch Manuel utilisateur
Korenix
Korenix JetNet 5710G Series Manuel utilisateur
Automated Logic
Automated Logic ZN551 Manuel du propriétaire
Cisco
Cisco ASR 1000 Series Manuel de l'opérateur
EnGenius
EnGenius ESR-9710 Manuel utilisateur
Cisco
Cisco 805 Series Instructions d'utilisation et de sécurité