GEONAUTE ONstart 310 Manuel utilisateur

EN ONstart 310

Intuitive guide

Start / Standby

This product can be switched to standby to increase battery life.

To start ►Press Cfor 2 seconds

To switch to standby ►Go to "TIME"or "ALARM"mode

►Press Cfor 5 seconds

NOTE: ONstart 310 can be switched to standby manually if the stopwatch and timer are at zero.

ONstart 310 switches to standby mode automatically after 24 hours.

Accessing the functions

Press the Mode button (B) in succession to access the various functions.

• STOPWATCH: Stopwatch (1/100s up to 99h59min59s) with 50 split times

• TIMER: 3 types of countdown:

 MATCH: countdown with several programmable times (see page 3/8)

 COACH: with several customisable workouts (see page 3/8)

 UPDOWN: countdown followed by a stopwatch (see page 4/8)

• TIME: Time and date

• ALARM: Alarm

• PACER: Sets a cadence (from 1 to 240 beeps/min)

Note: For each function, when set for the first time, ONstart 310 will switch automatically to settings mode.

B B B B

LAP-SPLIT / Reset / Decrease Start / Pause / Increase

LAP

SPLIT

Mode / Validation / (Settings)

Main display

RECALL: Recall split time

Return

Settings

1/6

Stopwatch Mode

4.1 - Using the stopwatch

Start the stopwatch ►Press C

Pause ►Press C

Reset ►Press Awhen the stopwatch is paused.

4.2 - Using split times

ONstart 310 measures split times (SPLIT: the time taken from the start up to a given point) and lap times (LAP: the

time taken since the previous partial measurement up to the given point).

Taking a split time when the stopwatch is on ►Press A

Each time Ais pressed, the latest LAP and SPLIT times are shown below the total time.

ATotal time

Most recent LAP

SPLIT

LAP no.

START

LAP 1

SPLIT 1

SPLIT 2

SPLIT 3

END: SPLIT 4

LAP 2 LAP 3 END: LAP 4

400 m 800 m 1200 m 1500m

STOP

4.3 - Viewing split times

To view the split times for each LAP/SPLIT (when the stopwatch is on

or off)

►Press D

To scroll through the various split times as well as the average time,

the quickest time and the slowest time

►Press D

D D D D

Time for LAP 1

and Split 1 AVG

Average of the split

times

FAST

Fastest split time and

corresponding LAP

SLOW

Slowest split time and

corresponding LAP

Note: It is possible to view only the latest activity timed with the stopwatch.

... up to 50 LAP/SPLIT times

2/6

Timer mode (countdown)

ONstart 310 has 3 different countdown modes.

• MATCH: Countdown with several programmable times (up to 9 blocks and 99 repetitions).

Perfect for refereeing a match with several half-times.

Block 1 Block 2 ...... Block no.

X repetitions (Repeat)

• COACH: Coach with several customisable workouts (up to 99 Action + Rest series and 99 repetitions for each

series).

Series 1 Series 2

Warm Up Action Rest Break Action Rest ...... Cool

X repetitions (Repeat) X repetitions (Repeat)

This type of countdown is designed for programming a workout session made up of blocks that vary in intensity and

length. Perfect for interval training.

WARM UP Warm up phase

ACTION Acceleration phase

REST Deceleration phase

BREAK Recovery time between 2 series

COOL Cool down time

• UpDown: Countdown linked to a stopwatch. When the countdown is over, the stopwatch starts automatically.

Perfect for the start of a race using a countdown (sailing in a regatta, for example).

5.1 - Selecting the countdown

►Go to "TIMER"mode by pressing B.

►Use Aand Cto select the countdown and press Bto conﬁrm.

ACACC

B B B

5.2 - Setting the "MATCH" countdown

►Go to countdown mode then select "MATCH"mode

►Press and hold the Ebutton to access the settings

(when setting for the ﬁrst time, you will arrive there automatically).

►Set the countdown times and the repetitions

by pressing the A(-) and C(+) buttons and press the

Bbutton to conﬁrm.

5.3 - Setting the "COACH" countdown

For "COACH"mode, 9 different schedules can be saved.

►Go to countdown mode then select "COACH"mode

►If you have already created several workouts,

select the one you want to set.

►Press and hold the Ebutton to access the settings

(when setting for the ﬁrst time, you will arrive there automatically).

►Choose your settings by pressing the

A(-) and C(+) buttons and press the

Bbutton to conﬁrm:

• Edit: modify a workout programme.

• Delete: delete a workout programme.

• Rename: rename an existing programme.

• Create: create a workout programme.

Time remaining

Number of

repetitions

completed

Number of

repetitions

programmed

Progress in blocks

completed

Time remaining

Number of

repetitions

completed Number of

repetitions

programmed

3/6

5.3.1 - "EDIT" programme

After selecting "EDIT"for the relevant programme, set the countdown time for each exercise, the number of series

(from 1 to 99) and repetitions (1 to 99) by pressing the A(-) and C(+) buttons and press the Bbutton to confirm.

Series 1 Series 2

Warm Up Action Rest Break Action Rest ...... Cool

X repetitions (Repeat) X repetitions (Repeat)

5.3.2 - "DELETE" programme (only if at least one programme has been saved)

After selecting "DELETE"for the relevant programme, select YES to delete the programme by pressing the A(-)

and C(+) buttons and press the Bbutton to confirm.

5.3.3 - "RENAME" programme (only if at least one programme has been saved)

After selecting "RENAME"for the relevant programme, select YES to rename the programme by pressing the A(-)

and C(+) buttons and press the Bbutton to confirm each letter.

5.3.4 - "CREATE" programme

After selecting "CREATE", set the various countdown times, the number of series (from 1 to 99) and repetitions

(1 to 99) by pressing the A(-) and C(+) buttons and press the Bbutton to confirm.

Series 1 Series 2

Warm Up Action Rest Break Action Rest ...... Cool

X repetitions (Repeat) X repetitions (Repeat)

By default, the name of the workout programme is "COACH 1", "COACH 2", etc.

If you want to change this, go to the "RENAME" STEP.

"MEMORY FULL" appears if the memory is full. One or more programmes will need to be deleted by going to the

"DELETE" STEP.

5.4 - Setting the "UPDOWN" COUNTDOWN

►Go to countdown mode then select "UPDOWN"mode

►Press and hold the Ebutton to access the settings

(when setting for the ﬁrst time, you will arrive there

automatically).

►Set the countdown times by pressing the A(-) and C(+) buttons and press the Bbutton to conﬁrm.

5.5 - Using the countdown

►Go to the desired countdown mode.

►For "COACH"mode, select the desired saved workout by pressing the A(-) and C(+) buttons and press the B

button to conﬁrm.

Starting the countdown ►Press Start/Pause (C)

Pause ►Press Start/Pause (C)

Reset ►Press Reset/LAP (A)

4/6

PACER mode

The "PACER" can be used to set a per-minute pace with

beeps at a set frequency. The pacer is used in combination

with a stopwatch.

Setting the PACER

►Go to "PACER" mode

►Press and hold the Ebutton to access the settings.

►Set the per-minute frequency (1, 2, 3, 4, 5, 10, 15, 20, 30, 40, 50, 60, 80, 100, 120, 140, 150, 140, 180, 200 or

240 bpm) by pressing the A(-) and C(+) buttons and press the Bbutton to conﬁrm.

Using the PACER

Start the pacer and the stopwatch ►Press Start/Pause (C)

Pause ►Press Start/Pause (C)

Reset ►Press Reset/LAP (A)

Time Mode

Setting the time mode

►Go to the "TIME"mode

►Press and hold the Ebutton to access the settings.

►In turn, set the hours, minutes, format for the time, year, month, day and the date format by pressing the A(-)

and C(+) buttons and press the Bbutton to conﬁrm.

Alarm Mode

Setting the Alarm mode

►Go to the "ALARM"mode

►Press and hold the Ebutton to access the settings.

►Enable (ON) or disable (OFF) the alarm then set the hour and minutes by pressing the A(-) and C(+) buttons

and pressing the Bbutton to conﬁrm.

Using the alarm

►To stop an alarm ringing: press any button.

Pace value set

Stopwatch

5/6

4 Boulevard de Mons – BP 299

59665 Villeneuve d’Ascq cedex – France

ɉɪɨɢɡɜɨɞɢɬɟɥɶɢɚɞɪɟɫɎɪɚɧɰɢɹ

Precautions for Use

This product is waterproof (1 ATM) in wet conditions, when exposed to water spills and to rain but

cannot be submerged in water.

CR2032

To change the battery, visit the store where you purchased your product. If you change the battery

yourself, you may damage the seal, affect the watch’s watertightness, and void your warranty. Battery life

is affected by how long the product has been at the store and how you use the product.

The "crossed out bin" symbol means that this product and its batteries cannot be disposed of with

household waste. They must be disposed of via selective waste sorting. The product and batteries must

be recycled at a collection point at end of life. Recycling your electronic waste protects the environment

and your health. Discard your batteries in a recycling area.

Download the instruction manual and contact us at www.support.geonaute.com

6/6

Ref. 1850.754

cc : 89854

Made in China - Fabricado na/em China

Произведено вКитае - Imal edildigi yer Çin

中国制造 - 中國製造 - ผลตในจน

以下标示仅在中国大陆地区适用

中国制造 - 中國製造

上海莘威运动品有限公司, 上海市闵行区申北路2号邮

编:201108

商标 : GEONAUTE

产品等级：合格品 - 质检证明：合格

执行标准：GB/T 227782008

540-0011 大阪市中央区農人橋1-1-22 大江ビル10

階ナチュラムイーコマース株式会社

廢電池請回收

IMPORTADO PARA BRASIL POR IGUASPORT LtdaCNPJ :

02.314.041/0001-88

для занятий спортом

хронометр

Импортер: ООО "Октоблу", 141031, Россия, Московская область,

Мытищинский район, МКАД 84-йкм., ТПЗ "Алтуфьево", владение 3,

строение 3, +7(495)6414446

Не подлежит обязательному подтверждению соответствия

台灣迪卡儂有限公司台灣台中市408南屯區大墩南路379號諮詢電話: (04) 2471-3612

TURKSPORT Spor Urünleri Sanayi ve Ticaret Ltd.ŞtiOsmaniye Mahallesi

Çobançeşme Koşuyolu BulvarıNo: 3 Marmara Forum Garden Ofﬁce 0B

Blok 01 Bakırköy 34146 Istanbul, TURKEY

Table des matières

Autres manuels GEONAUTE Montre

GEONAUTE

GEONAUTE ONrhythm 50 Manuel utilisateur

GEONAUTE

GEONAUTE WATCH KRONYS 200W Manuel utilisateur

GEONAUTE

GEONAUTE SYNKRON 400 Manuel utilisateur

GEONAUTE

GEONAUTE WATCH KRONYS 200D Manuel utilisateur

GEONAUTE

GEONAUTE WATCH CONO TRTL 500 Manuel utilisateur

GEONAUTE

GEONAUTE KRONYS 300 Manuel utilisateur

GEONAUTE

GEONAUTE WATCH OUTDOOR 500WW Manuel utilisateur

GEONAUTE

GEONAUTE W900 ? SWIP Manuel utilisateur

GEONAUTE

GEONAUTE WATCH KRONYS 500Y Manuel utilisateur

GEONAUTE

GEONAUTE ONwalk 900 Manuel utilisateur

GEONAUTE

GEONAUTE SYNKRON 200M Manuel utilisateur

GEONAUTE

GEONAUTE WATCH KRONYS 200A Manuel utilisateur

GEONAUTE

GEONAUTE W 700XC M Swip Manuel utilisateur

GEONAUTE

GEONAUTE oxylane ONgo' up 600 Manuel utilisateur

GEONAUTE

GEONAUTE On Goup 700 Manuel utilisateur

GEONAUTE

GEONAUTE SYNKRON 200 Manuel utilisateur

GEONAUTE

GEONAUTE MW600 Manuel utilisateur

GEONAUTE

GEONAUTE ONMOVE 100 Manuel utilisateur

GEONAUTE

GEONAUTE WATCH KRONYS 500W Manuel utilisateur

GEONAUTE

GEONAUTE SYNKRON 200Y Manuel utilisateur

GEONAUTE

GEONAUTE WATCH CHRONO 700 Manuel utilisateur

GEONAUTE

GEONAUTE ONmove 120 GPS Manuel utilisateur

GEONAUTE

GEONAUTE SYNKRON 500.A Manuel utilisateur

GEONAUTE

GEONAUTE WATCH SYNKRON 300W Manuel utilisateur

Manuels Montre populaires d'autres marques

Pandora

Pandora WATCH2 Manuel utilisateur

Casio

Casio QW-4343 Manuel utilisateur

Suunto

Suunto X6 Manuel utilisateur

Seiko

Seiko N830 Manuel utilisateur

MotionX

MotionX 365 Manuel utilisateur

Garmin

Garmin VENU SQ 2 Manuel utilisateur

QCY

QCY Watch GTC Manuel utilisateur

Canyon

Canyon Cindy CNE-KW41WP Manuel utilisateur

Esq

Esq Watches Guide d'installation

Crane

Crane AA5-CDSM-3A Manuel utilisateur

Timex

Timex W-214 Manuel utilisateur

DETOMASO

DETOMASO MATERA Manuel utilisateur

Geemarc

Geemarc Watch N Shake Manuel utilisateur

LORUS

LORUS W590 Manuel utilisateur

STENLILLE

STENLILLE Actío Manuel utilisateur

Casio

Casio 5594 Manuel utilisateur

Sinn

Sinn HUNTER'S WATCH 3. Edition Manuel utilisateur

Slazenger

Slazenger SLZ800 Manuel utilisateur