Geo-FENNEL FL 245HV + Manuel utilisateur

www.geo-fennel.com

DE | EN | FR

FL 245HV +

USER MANUAL

Contents

1. Supplied with A

2. Power supply B

3. Features C

4. Operation D

5. Receiver E

6. Safety notes F

Dear customer,

Thank you for your conﬁdence in us having purchased a geo-FENNEL instrument.

This manual will help you to operate the instrument appropriately.

Please read the manual carefully - particularly the safety instructions. A proper use only guarantees a

longtime and reliable operation.

geo-FENNEL

Precision by tradition.

SUPPLIED WITH

· Rotating Laser Level FL 245HV +

· Receiver with clamp for levelling staff

· Remote control

· Rechargeable battery

· Charger

· Wall mount

· Floor support

· Box for alkaline batteries

· Laser intensive glasses

· Magnetic target

· Container

· User manual

FL 245HV +with receiver FR 45 Art. no. 244045

FL 245HV +with receiver FR-DIST 30 Art. no. 244050

FL 245HV +with receiver FR 77-MM Art. no. 244077

Technical data

Self-levelling horizontal / vertical

Self-levelling range ± 5°

Laser class 2

Accuracy

· horizontal ± 0,75 mm / 10 m

· vertical ± 1,0 mm / 10 m

Working range with receiver Ø

· with FR 45 1.200 m

· with FR-DIST 30 600 m

· with FR 77-MM 600 m

· w/o receiver 60 m

Scanning w/o receiver (radius) 60 m

Manual slope setting

· X axis ± 5° (9%)

· Y axis ± 5° (9%)

Axis direction vertical yes

Remote control range IR 100 m

Rotating speed 300, 800 rpm

Power supply / operating time 26 h (NiMH)

Temperature range -20°C - +50°C

Dust / water protection IP 65

CHARACTERISTICS

· Working range up to 1200 m diameter (depending on the receiver used)

· Dust / water protection IP 65 for exterior application

· Variable scanning and laser point mode

· Permanent 90° plumb beam

· AutomaticTILT alarm function

· Auto-shut-off when out of level

· Manual slope setting of X and Y axis

· Remote control function (on/off)

FEATURES

1. Laser emitting window

2. Rotating head

3. Receiving window remote control

4. Handle

5. Battery compartment

6. Keypad

7. Support for vertical use

8. 5/8“ thread hole vertical

9. 5/8“ thread hole horizontal

10.Charging plug

POWER SUPPLY

CHARGING THE BATTERY

Connect the charger with the charging plug of the instrument and the

power source. If the charging LED is red the battery is being charged;

if the LED is green the battery is fully charged.

ATTENTION

The rechargeable battery can be charged if it is in the instrument or if

it is ouside.

Battery status indication: If the ON/OFF LED ﬂashes the battery has

to be recharged.

Both the standard Li-Ion battery pack and alkaline batteries can

be used.

1) Insert alkaline batteries into the alkaline battery box (ensure

correct polarity) and ﬁx the battery box into the instrument.

2) Fix the rechargeable battery box into the instrument.

5/8″thread hole in the centre

5/8″thread hole in side

Charging

LED

OPERATION D

HORIZONTAL USE

Set up the instrument on an even surface or mount it onto a tripod.

After powering on the unit a ﬂashing laser diode indicates that the automatic self-levelling procedure

is working. The laser starts rotating when self-levelled. If not the laser was set up outside of its self-

levelling range. In this case set up the instrument on a more even surface.

VERTICAL USE

· Unfold the datum point on the integrated ﬂoor mount and set up the laser in its vertical (lay-down)

position.

· The laser automatically self-levels in this position.

· Set the ciruclar bubble as accurately as possible by using the two thumb screws. This ensures that

the instrument is set within its self-levelling range and the rotating beam is centered over its datum

point.

OPERATION - INSTRUMENT KEYPAD

POWER ON/OFF (2)

Power the laser on/off with button (2).

If the red ON/

OFF LED (1) is illuminated the laser is powered on.

First the laser dot is ﬂashing, then

the self-levelling

procedure starts automatically; meanwhile the TILT

LED (8) is ﬂashing. When the self-levelling procedure is

completed the laser rotates with 600 rpm and the TILT

LED (8) is illuminated permanently (= TILT function

activated).

7812

If in normal use the ON/OFF LED (1) ﬂashes the battery has to be recharged.

ROTATING SPEED (3)

The instrument standardly rotates with max. speed (= 800 rpm). Press button (3) to change to 300 rpm.

ON / OFF REMOTE CONTROL FUNCTION - INSTRUMENT BUTTON ONLY (4)

With this button the remote control function can be disabled in order to avoid that several units on one

construction site disturb each other. If the remote control LED is illuminated it is the remote control

function is ready-to-receive.

LED REMOTE CONTROL (9)

If the LED is illuminated the the remote control function is ready-to-receive.

TILT MODE (7)

After completion of the self-levelling procedure the TILT mode is automatically enabled.

If the level is now disturbed the rotation stops and the TILT LED is ﬂashing.

1. Press theTILT button (7) once: The rotation of the laser starts - but the TILT mode is disabled.

2. Press theTILT button (7) twice: The rotation of the laser starts, the self-levelling procedure is

completed and the laser restarts working with enabled TILT mode.

Press button (7) to disable the TILT mode after completion of the self-levelling procedure.

OPERATION WITH THE REMOTE CONTROL

SLOPE MODE (10)

SLOPE SETTING (11)

Slopes can be set up to ± 5° in X and Y direction.

Press button (10) to enter into this mode. To change between

X and Y axis press button (10) again. The LEDs (5) and (6)

show the axis chosen. To tilt the axis chosen press buttons

(11). To quit the slope mode press button (10) again.

Power LED

Slope adjustment axis

direction selection button

Slope adjustment button

Area scanning/dot move clockwise

or anti-clockwise

Area scanning function

Rotation speed set button

Remote control sleep button

SCAN FUNCTION (12)

Press button (12) to change from the rotation to the scan mode:

Press button 1 x = long scan line

Press button 2 x = short scan line

Press button 3 x = dot mode

SCAN DIRECTION (13)

Change the direction of the scan mode with button (13).

LED (14) - REMOTE CONTROL

This LED ﬂashes if any button is used and a beep sounds.

ON / OFF REMOTE CONTROL FUNCTION (15)

With this button the remote control can be powered off - but not the instrument.

Press the ON/OFF button of the remote; the instrument will be in standby function. The ON/OFF LED

of the laser ﬂashes. The values set will remain.

ROTATING SPEED - REMOTE BUTTON (16)

The instrument standardly rotates with max. speed (= 800 rpm). Press button (16) to change to

300 rpm.

If the batteries of the remote are empty each key pressure will cause a permanent sound.

APPLICATION

RECEIVER FR 45 E

FEATURES

1. Vial (2)

2. Display

3. Reference indicator

4. Receiving window

5. ON / OFF switch

6. Loudspeaker

7. Battery compartment (back side)

8. Sound on / off

9. Accuracy coarse / normal / ﬁne

10.Light on / off

11. Magnets (2)

12.1/4“-thread for clamp (back side)

SUPPLIED WITH

Receiver FR 45, battery, clamp, user manual

Technical Data

Indication Front display

Accuracy coarse ± 10 mm

Accuracy normal ± 4 mm

Accuracy ﬁne ± 2 mm

Tones 3

Operating time 400h

Power supply 1 x 9V

SYMBOLS

1. Power ON / OFF

2. Battery status indicator

3. Detection indicator

4. Sound ON / OFF

5. Detected position indicator

ACCURACY COARSE / NORMAL / FINE

The FR 45 is equipped with three precision modes. They can be chosen by pressing button (9):

Accuracy coarse ± 10 mm

Symbol on display: without symbol

Accuracy normal ± 4 mm

Symbol on display:

Accuracy ﬁne ± 2 mm

Symbol on display:

INSTALLATION OF THE BATTERIES

• Open the battery compartment cover (7).

• Insert 1 x 9 V AA battery according to the installation symbol (ensure correct polarity!). Close the

cover.

• In order to save battery power the receiver will automatically turn off if it has not received laser scan-

ning singal for 5 minutes.

USE OF RECEIVER

Press the button (5) to switch the unit on.

Move the receiver up and down carefully to detect the laser beam.

AMove the receiver down

Acoustic signal : ultra-short requent beep

BMove the receiver up

Acoustic signal: short requent beep

COn level

Acoustic signal: continuous beep

A+B: The closer the distance to „on level“ (C) is,

the shorter the arrows become.

CLAMP FOR LEVELLING STAFF

If required the FR 45 can be attached to laser poles or any other equipment by means of the clamp

supplied with.

Autres manuels pour FL 245HV +

Ce manuel convient aux modèles suivants

Autres manuels geo-FENNEL Niveau laser

geo-FENNEL

geo-FENNEL CrossPointer5 SP Manuel utilisateur

geo-FENNEL

geo-FENNEL Geo3X HP Manuel utilisateur

geo-FENNEL

geo-FENNEL ECOLINE EL 609 Manuel utilisateur

geo-FENNEL

geo-FENNEL FL 40-4Liner Manuel utilisateur

geo-FENNEL

geo-FENNEL FL 110HA Manuel utilisateur

geo-FENNEL

geo-FENNEL FL 220HV Manuel utilisateur

geo-FENNEL

geo-FENNEL CrossPointer5 SP Manuel utilisateur

geo-FENNEL

geo-FENNEL MULTI-LINER FL 55 PLUS HP Manuel utilisateur

geo-FENNEL

geo-FENNEL Selection PRO FLG 40-PowerCross GREEN SP Manuel utilisateur

geo-FENNEL

geo-FENNEL Geo4-XR GREEN Manuel utilisateur

geo-FENNEL

geo-FENNEL CrossPointer5 SP Manuel utilisateur

geo-FENNEL

geo-FENNEL FL 100HAJunior Manuel utilisateur

geo-FENNEL

geo-FENNEL FR 45 Manuel utilisateur

geo-FENNEL

geo-FENNEL Maxi-Liner FL 65 HP Manuel utilisateur

geo-FENNEL

geo-FENNEL 360 LinerPoint HP Manuel utilisateur

geo-FENNEL

geo-FENNEL FL 30 Manuel utilisateur

geo-FENNEL

geo-FENNEL FLG 64-GREEN HP Manuel utilisateur

geo-FENNEL

geo-FENNEL 530000 Manuel utilisateur

geo-FENNEL

geo-FENNEL MULTI-LINER FL 55 PLUS HP Manuel utilisateur

geo-FENNEL

geo-FENNEL Geo5X-L360 HP Manuel utilisateur

geo-FENNEL

geo-FENNEL MULTI-LINER FL 55 PLUS HP Manuel utilisateur

geo-FENNEL

geo-FENNEL FLG 260VA-Green Manuel utilisateur

geo-FENNEL

geo-FENNEL FL 10-CROSS Manuel utilisateur

geo-FENNEL

geo-FENNEL FKL 50 Manuel utilisateur

Manuels Niveau laser populaires d'autres marques

Nedo

Nedo ET-5 Manuel utilisateur

LaserLiner

LaserLiner X2-Laser Manuel utilisateur

Spectra

Spectra LL300N Manuel utilisateur

Nedo

Nedo Crossliner 4 Manuel utilisateur

Lasertec

Lasertec FX360G Manuel utilisateur

Flex

Flex ALC 8 Manuel utilisateur

Black & Decker

Black & Decker LZR5 Manuel utilisateur

Johnson

Johnson 40-6692 Manuel utilisateur

Cocraft

Cocraft HL 20-SG Manuel utilisateur

Zircon

Zircon iLine Manuel utilisateur

HWH

HWH 310 SERIES Manuel utilisateur

Leica

Leica iCON robot 60 Manuel utilisateur

LaserLiner

LaserLiner SuperCross-Laser SCL 2 Manuel utilisateur

LaserLiner

LaserLiner ActiveFinder XP Manuel utilisateur

DeWalt

DeWalt DW082 Manuel utilisateur

imex

imex EL20 Manuel utilisateur

Fixturlaser

Fixturlaser NXA D I-0912 Manuel utilisateur

Wacker Neuson

Wacker Neuson PAL450 Manuel utilisateur

geo-FENNEL FL 245HV + Manuel utilisateur

Manuels Niveau laser populaires d'autres marques