Genius G-Shot P210 Manuel utilisateur
Service Manual
G-Shot 210
Version K01A
Service Manual G-Shot P210
Contents ………………………………...…………..2
1.Function Test ………………………………………3
2.Troubleshooting ……………………………………5
3.Disassemble Procedure ……………………………6
4.Firmware Update Procedure ………………….…..8
5.Parts List ……………………………………………9
6.Tooling …………………………..…………………13
Version: K01A 2
Service Manual G-Shot P210
1. Function Test
TOOL/EQUIPMENT
SD card, TV,AC adapter, flower, accessory, computer
OPERATION DESCRIPTION
ITEM OPERATON DESCRIPTION
1 Plug in AC Adapter then Power on, Insert SD card and set to Red-eye
mode, shooting a picture in the dark and confirm the flashing twice.
2 Set to Forced flash mode, take the pictures without flash leakage and no
flash in the bright and far place.
3 Set to Off flash and switch to Macro mode, shooting the picture in the
dark and near place.
4 Press manual button to select IMAGE SIZE: 1600*1200 or 800*600.
Selecting QUALITY:NORMAL→FINE→SUPER FINE and they will
indicate the image size, quality and quantity of picture at the TFT-LCD
on the same time.
Version: K01A 3
Service Manual G-Shot P210
5 Press MODE button to set to movie mode to check the movie function.
6 Set to Video mode to select NTSC/PAL mode. The image should be
normally and without a little bit dark, noise or incomplete.
7 Select Erase mode at the Play Menu to erase one then erase all pictures
that don’t permit can’t erase image situation.
8 Turn off power and unplug theAC adapter.
Version: K01A 4
Service Manual G-Shot P210
Version: K01A 5
2. Troubleshooting
Item NG point NGAnalyzing solution
1 Power on failure (Big current) Changing the Power Board.
2 Power on failure (Current no
respond) Changing the Power Board.
3 Big capacitor no charge Changing the Power Board.
4 No trigger Changing the Power Board.
5 It appears color string on the
TFT-LCD after power on.
Changing the Power Board.
6 The LED of Red-eye is
constantly light. Changing the Power Board.
7 It has a report in triggering. Changing the Power Board.
8 It’s only triggering once on
Red-eye mode. Changing the Power Board.
9 Triggering while turning on the
power. Changing the Power Board.
10 Power On automatically. Changing the Power Board.
11 Power Off automatically. Changing the Power Board.
12 Charging current is too big.
(Over 2A) Changing the Power Board.
13 Power on failure Changing the MCU Board.
14 TFT-LCD is white screen. Changing the Power Board.
15 LCD/TV noise Changing the MCU Board.
16 Current drain is too big. Changing the Power Board.
17 TFT-LCD no back lit Changing the Power Board.
18 TV is black and white screen Changing the MCU Board.
19 USB connection NG Changing the MCU Board.
20 Power on failure with
connecting the USB cable. Changing the MCU Board.
If change any PCB of DSC, the calibration is necessary.
Service Manual G-Shot P210
4. Firmware Update Procedure
Product : G-Shot P210
To update this camera firmware, you will need to have
1. The new firmware file from Premier.
2. One SD card.
3. One card reader.
4. One AC Adapter only for the camera.
Please follow the steps below to perform the update process:
1. Rename the Boot file name to Code.bin.
2. Prepare a formatted and empty SD card.
3. Insert a SD card to the card reader. Copy the firmware file (Code.bin) into the SD
card root.
4. Make sure the new firmware file is copied to the SD card.
5. Insert the SD card into the camera, and then plug in the AC adapter (3.3V/2.6A)
into the camera.
6. Turn on the camera power.
7. Wait until 10 beeps finish then start to firmware update.
8. At this time the LED (RED) blinking until it go out, the firmware update
procedure is completed.
9. Remove the AC adapter and reformat the SD card if you want to use it again.
10. Check new firmware version from SETUP menu-> FACTORY SET.
Note: Don’t remove the power source during firmware update procedures.
Version: K01A 8
Service Manual G-Shot P210
5. Part List (G-Shot P210)
G-Shot P210_BODYASM: 25201255100
Item Part Name Part Number
1 Front Cover 15100016101
2 Rear Cover 15120011101
3 Top Cover 15100017101
4 MCU Board 20200012101
5 Switch Board 20200013101
6 Power Board 20200014101
7 ASM,G-Shot P210,Dummy 25200009101
1. Front Cover
Version: K01A 9
Service Manual G-Shot P210
2. Rear Cover
3. Top Cover
Version: K01A 10
Service Manual G-Shot P210
4. MCU Board
5. Switch Board
Version: K01A 11
Service Manual G-Shot P210
6. Power Board
Version: K01A 12
Autres manuels pour G-Shot P210
1
Table des matières
Autres manuels Genius Appareil photo numérique
Genius
Genius DSC13M SMART Manuel utilisateur
Genius
Genius P313 Feuille d'instructions
Genius
Genius D610 Manuel utilisateur
Genius
Genius P850 Manuel utilisateur
Genius
Genius D5123 Manuel utilisateur
Genius
Genius G312 Manuel utilisateur
Genius
Genius G-shot P534 Manuel utilisateur
Genius
Genius P535 Manuel utilisateur
Genius
Genius DSC-1.3M Smart Manuel utilisateur
Genius
Genius P513 Manuel utilisateur
Genius
Genius G-Shot P611 Manuel utilisateur
Genius
Genius D613 Manuel utilisateur
Genius
Genius 501 Manuel utilisateur
Genius
Genius G-shot P534 Manuel utilisateur
Genius
Genius NAVIGATOR 900 Manuel utilisateur
Genius
Genius P433 Manuel utilisateur
Genius
Genius P635 Manuel utilisateur
Genius
Genius G-Shot D1211 Manuel utilisateur
Genius
Genius V1010 Manuel utilisateur
Genius
Genius G-Shot G512 Manuel utilisateur
