Geneinno TITAN Manuel utilisateur
TITAN
USER MANUAL
V1.0.5
2018.12
I. Users tips 2
II. Product
Overview 3
Titan graphic 3
Connect Titan 4
Bluetooth controller 5
Charge 6
III. APP operation
App main page 7
App operation interface 8
APP system settings 9
APP info 12
APP photo and video 14
IV. Brief Troubleshooting 15
V. Appendixes
Product parameter list 16
Product warranty 17
CONTENT
Packing list：
1.Titan, wireless relay, cable
2.Charger
3.Balancing weight
4.The bluetooth handle
5.Filter (users'choice)
6.User's Manual
Manual：
The contents and pictures of this manual are subject to the actual version and
the latest version. The content is subject to change without prior notice. Please
visit the official website “Download”page for the latest version.
APP:
Android IOS
Attention：
1.It is recommended that the weight Balancing block should not be installed in fresh water,
and the weight Balancing block should be installed in seawater. The installation position
should be adjusted according to the actual balance state of the host machine, whichever is
the best balance that the host machine can achieve.
2.Wireless relay design for low grade waterproofing standards, do not use directly in water.
3.At the beginning of use, it is recommended that the cable be connected to the wireless
relay first, and then to the host machine. The system will be powered on.
4.Please control the speed of movement during use to avoid scratches or equipment
damage caused by collision.
5.After the end of use, please rinse with fresh water and dry , especially keep the insertion
dry.Reduce corrosion of sea water and store in dry ventilation
6.Titan is designed for positive buoyancy. It is recommended to be used in clean water so
as not to stick sediment to affect buoyancy balance.
7.Please connect the Titan to wireless relay before putting it in the water, set the fresh/salt
water according to using environment
I. User tips
Copyright © 2018 GENEINNO All Rights Reserved.
II. Product
Overview：
Titan is a consumer level underwater intelligent robot, equipped with A17/A7 dual-
core CPU, supporting H265, 4K video encoding and decoding.
Equipped with professional deep-sea starlight level 4k camera, front 3000lm led light,
and built-in special image processing DSP,
At the same time, the whole machine adopts industrial-grade waterproof scheme,
with a maximum diving depth of 150m.The maximum speed is 2m/s, 2 high-power
horizontal thrusters and 4 low-power vertical thrusters. The closed-loop control
algorithm can effectively realize 360 degree full-attitude control, underwater
hovering and self-balance.
④signal/charging
port
Titan graphic：
Head
①Camera
②Light
Top
Bottom
⑥Buoyancy
control block
③Thruster
③Thruster
⑤Drainage
port
⑦Extension
port
Wireless relay
Cable
Copyright © 2018 GENEINNO All Rights Reserved.
Connect instructions：
1. Connect device: Insert one end of the wireless relay cable into the socket of the wireless
relay and tighten it with force. Insert the other end into the socket of the host machine and
tighten it with equal force, then complete Titan connection and power on.
2. App connect: when Titan gets to work(about 1 minute after connection), the LED light
on ,Titan will flash twice every several seconds, it means the Titan is ready to connect to
your phone, pad and PC devices, search the Wi-Fi hotspot named GENEINNO_XXXX,
connect your device to it, the default passwords is 88886666, then get to the app control
interface.
3. Operation: Put Titan into the water, you can freely control Titan to rise and dive.Wireless
relay has low grade waterproofing standard. It is recommended to be placed on shore or
on board and fixed to avoid the difficulty of recovery after being dragged into the water by
Titan.
Mobile device：with Android or IOS GeneROV APP installed
Connect Titan
Charger ①Plug
②Adapter
③Charging port
Copyright © 2018 GENEINNO All Rights Reserved.
①
③
Titan
wireless relay
②
④
⑤
Bluetooth controller
1. Connecting：
A: Start up: Turn the left button to the on position, press the HOME for 2 seconds until
the LED1 and LED2 flickering, the controller turns on.
B: Connect: When the controller is turned on, the light flickers, the controller is in the
connecting mode. Open the APP on your device, open the right menu bar, open
Bluetooth controller, tap to search the controller, you can find the BLE device named
GENEINNO-XXXX, tap to connect; when Bluetooth controller connected, the LED1/2 light
stays on.
C. Turn off: Turn the left button to the off position, the controller turns off. When it
turns on for 3 minutes without connect the device, the controller will turn off
automatically; when the Bluetooth is connected for 3 minutes with out operation, the
controller will turn off automatically.
D. Connect position confirm：When it controller is connected successfully via
Bluetooth, open the GeneROV APP, there will be the controller icon indication in the APP
operation interface.
2. Bluetooth controller keys：
A: Confirm for menu and pages, switch for menu of turn on/off；
B: Back for menu and pages, cancel；
X: Gear reduce by one, doesn’t work when it’s in the max third gear；
Y: Gear increase by one, doesn’t work when it’s in the min first gear.;
R: Light down by one, LED out when it’s 0, doesn’t work when it reach it min.
R2: Light up by one, doesn’t work when it reach the max.
R3(Press the right gear vertically): Turn on/off the lock of depth.
L: Start/pause recording ；L2: shot, start/pause burst；
L3: (Press the left gear vertically): Turn on/off the lock of direction；
Stick R: Pop for more page information(Home page), selection move to the right or
current value increase by one(home page)，
Copyright © 2018 GENEINNO All Rights Reserved.
Copyright © 2018 GENEINNO All Rights Reserved.
Charge
1. Titan battery info will be seen at APP operation interface, battery signal light info
will be seen at wireless relay; Please charge Titan when battery is low using standard
charger and plug; charge Titan for 3 hours, wireless relay for 2 hours; signal lights on
charger is red when it’s charging, turn into green when fully charged.
2. Be sure, that there are no water in the plugs,before you start charging.
①How to charge Titan: tighten the plug between charger
and Titan
②How to charge wireless relay: tighten the plug between
charger and wireless relay
X：increase gear
Y：reduce gear
L：Record
L2：Shot
Dive up/down
Direction
control
Stick:
up/down
left/right A：Confirm
B：Quit
R：reduce LED lightness
R2：increase LED lightness
Stick L: Pop for the setting menu(home page), selection move to the left or current
value reduce by one(home page).
Stick U: Focus move up Stick D: Focus move down
Titan
Charger
Wireless Relay
Charge
①
②
III. APP operation
[16]
[15]
APP Main Page
[11]
[12]
[13]
12
3
4
5
6 7 8
：Product type
：Menu (APP update, hardware update, Bluetooth controller, about and help options)
：Titan picture
：Current status
：Current equipment name and entrance
：Device
：Forum
：Underwater City
[1]
[2]
[3]
[4]
[5]
[6]
[7]
[8]
Copyright © 2018 GENEINNO All Rights Reserved.
：Return
：Menu
：Depth
：Up/Down/Left/Right
：Motion mode
：Running Time
：Bluetooth controller
：Temperature
：Delay
：Battery
：Settings
：Shot/Film mode
：Shot/Film
：photos/Videos
：Attitude control
：LED
：3D real-time attitude
：Lock Down Depth
：Motion Switch
：Lock Down Direction
：Restore 0 pitch angle
APP operation interface
APP Operation Interface
5 6 7 8 9 10
1
2
3
4
11
12
13
14
15
161
171
18 19 20 21
[21]
[1]
[2]
[3]
[4]
[5]
[6]
[7]
[8]
[9]
[10]
[11]
[12]
[13]
[14]
[15]
[16]
[17]
[18]
[19]
[20]
Copyright © 2018 GENEINNO All Rights Reserved.
APP System Settings
App consists of camera settings, recording settings, environment settings,
señor settings, mode settings and factory settings
App系统设置界面
1. Camera settings consist of shot settings, live-streaming quality and anti-shake
switchers。
Copyright © 2018 GENEINNO All Rights Reserved.
Autres manuels pour TITAN
1
Table des matières
Autres manuels Geneinno Robotique
Manuels Robotique populaires d'autres marques
STEMCenter USA
STEMCenter USA Pi-Bot v2.00 Manuel utilisateur
SunFounder
SunFounder PiDog Manuel utilisateur
Universal Robots
Universal Robots UR5 Manuel utilisateur
Universal Robots
Universal Robots E Series Manuel utilisateur
YASKAWA
YASKAWA MOTOMAN-MPL80 II Manuel utilisateur
EFORT
EFORT ECR5 Manuel d'instructions
