GeChic 1102I Manuel utilisateur
ユーザーガイド
On-Lap 1102I
Noces, Cauons & Warranty Exclusions
LCD Pixel Statement
Federal Communicaons Commission (FCC) Class B Statement
CE Declaraon of Conformity
WEEE Symbol Informaon
I
II
II
III
III
Chapter 1 Parts of On Lap Monitor & Accessories 1
Secon 1 Parts Descripon 1
Secon 2 Accessories Descripon 2
Chapter 2 Installaon Instrucons 3
Secon 1 Installaon of Horizontal Display 3
Secon 2 Store the Monitor in the Protecve Cover 4
Secon 3 Install 1102I Monitor to T1S2 Stand(Oponal) 4
Secon 4 Lay Touch Monitor Flat with 1102 Mul-Mount Kit(Oponal) 5
Secon 5 Mount On-Lap 1102 to VESA 75 Monitor Arm or Wall Mount
(with 1102 Mul-Mount Kit)(Oponal) 6
Secon 6 Install On-Lap Proprietary HDMI-A & USB-A to Dock Port
Cable(Oponal) 6
Chapter 3 Hot Keys, LED and OSD Instrucons 6
Secon 1 Hot Keys& LED Indicaons 6
Secon 2 OSD Descripon 7
Chapter 4 Sengs of Extended Display 9
Secon 1 Sengs of Extended Display on Windows 10 9
Chapter 5 Using of Touch Monitor 10
Secon 1 Noces 10
Secon 2 Touch Screen Sengs on Windows 10/7 10
Chapter 6 Product Specicaon 11
Secon 1 General Specicaon 11
Secon 2 Supported Operang Modes 12
Secon 3 Supported Video Modes 12
Chapter 7 Troubleshoong 12
CONTENTS
English
WEEE
IV
V
V
13
1. 13
214
15
115
216
3 1102I T1S2 16
41102 17
51102 On-Lap 1102 VESA75
18
6 HDMI-A + USB-A -Dock 18
LED OSD 18
1 LED OSD 18
22. OSD 19
21
1 - Windows 10 21
21
121
2 Windows 10/7 21
22
122
223
323
23
Noces, Cauons & Warranty Exclusions
Warning: The sign alerts you to potenal hazards that can hurt
you or damage the product.
1. When carrying On-Lap Monitor, please put it into the protecve cover with
glass side inward and avoid pressing the monitor violently and rubbing the
glass surface by any sharp objects.
2. When plugging in/out the cables, do make sure the force exerts in horizon-
tal direcon - do not shake the port or plug it in vercal direcon. Any dam-
age caused by wrong plug urging is not included in the warranty coverage.
3. The power input specicaon for On-Lap monitor is 5V 2A DC current.
Inpung On-Lap Monitor more than 5V can cause shortages, and this will
void the GeChic Manufacturer's Warranty. We suggest you to connect both
connectors of the USB power cable to your desktop΄s USB ports or use
GeChic 5V-2A charger.
4. Part of On-Lap Monitor or its protecve Cover contains magnets, please
put On-Lap Monitor away from hard drive or any device that may be eect-
ed or damaged by magnets. Please put the magnec buckle of protecve
cover away from your desktop when the PC is in sleep mode or boosng.
5. Cleaning On-Lap Monitor : Unplug the power input before cleaning. Please
use so cloth to clean touch screen. For stubborn stains, please use lightly-
dampened cloth to wipe again. Do not use benzene, alcohol, thinner, am-
monia, abrasive cleaners, compressed air or other corrosive solvents. These
solvents may cause permanent damage on the screen or leave unremova-
ble stain.
6. Please do not place the monitor on a shaky or unstable table, cupboard or
trolley and do not use the On-Lap Monitor on a moving vehicle.The Product
may be severely damaged from overturning or falling.
7. The product is not waterproof. Do not use this product in or near water.
8. Do not insert any object into the Product΄s slots or gaps. Do not disassem-
ble the monitor in any way.
9. High Volume Warning: High volume can lead to lasng damage to your
hearing. Please check the volume sengs before reproducing any sound.
10.Overuse of the monitor may result in vision damage. For every 30 minutes
with the monitor, give your eyes 10 minutes break. Avoid children under
age 2 to watch with the monitor; prevent children over age 2 from watch-
ing with the monitor over 1 hour per day.
11.Exclusions from Warranty Service
Please read the warranty terms below carefully, and follow the usage guide
and precauonary notes. Please keep this manual for future reference.
GeChic does not warrant uninterrupted or error-free operaon of this Prod-
uct. The warranty only covers failure /malfuncon under normal use condi-
ons during warranty period. The warranty does not apply to the following
condions:
(1)The bar code has been removed or worn down, and cannot be idened.
(2)This product has been modied, disassembled, or reed.
I
(3)Display and touch funcon working normally; only variaon in appear-
ance (i.e., ageing, arion, scratch, color changing and etc.).
(4)Any breakdown caused by power supply. (i.e., inpung power over 5V or
unsteady current)
(5)Any damage caused by disoperaon or failure to follow this manual. (i.e.,
Plug or unplug the cable in wrong direcon and causing damage on cable
or monitor.)
(6)Any damage caused by hing or cracking monitor accidentally or
purposely, or collapsing or overturning monitor.
LCD Pixel Statement
There is slightly uneven brightness on the screen when displaying dierent
screen paern. The LCD screen has 99.99% or more eecve pixels. 0.01% of
pixels or less may not light or may light incorrectly. The On-Lap monitor uses a
high quality LCD panel. Nevertheless, pixels on the LCD screen may not light or
appear as red or black dots. All the above are normal with the LCD monitor
and will not aect the normal usage of the product.
Avoid placing the monitor against sun-light, or it may damage the monitor.
An aerimage of the previous screen may remain, when the same image is
displayed for hours. In this case, the screen is recovered slowly by turning o
the power for a few hours.
Federal Communicaons Commission (FCC)
Class B Statement
Noce: This equipment has been tested and found to comply with the limits
for a class B digital device, pursuant to part 15B of the FCC Rules. These limits
are designed to provide reasonable protecon against harmful interference in
a residenal installaon.
If this equipment does cause harmful interference to radio or television recep-
on, which can be determined by turning the equipment o and on, the user
is encouraged to try to correct the interference by one or more of the follow-
ing measures:
●Reorient or relocate the receiving antenna.
●Increase the separaon between the equipment and receiver.
●Connect the equipment into an outlet on a circuit dierent from that to
which the receiver is connected.
●Consult the dealer or an experienced radio/TV technician for help.
Cauon:
1. Changes or modicaons not expressly approved by GeChic Corp. could
void the user's authority to operate the equipment.
2. Shielded interface cables and AC power cord, if any, must be used in
order to comply with the emission limits.
3. The manufacturer is not responsible for any radio or TV interference
caused by unauthorized modicaon to this equipment. It is the respon-
sibilies of the user to correct such interference.
II
CE Declaraon of Conformity
This product complies with the following standards:
●EN60950-1:2006 and A11+A1 (Safety requirement of Informaon Tech-
nology Equipment).
●EN 55032:2006+A1: 2007 (Radio Disturbance requirement of Infor-
maon Technology Equipment).
●EN55024:1998+A1:2001+A2:2003 (Immunity requirement of Infor-
maon Technology Equipment).
●N 61000-3-2:2006+A1: 2009+A2: 2009 (Harmonic current emissions).
●EN 61000-3-3:2008 (Voltage uctuaons & icker) following provisions
of direcves applicable.
●2006/95/EC (Low Voltage Direcve).
●2004/108/EC (EMC Direcve).
●2005/32/EC (EuP Direcve, EC No. 1275/2008 implemenng Direcve
for Standby and O mode power consumpon) and is produced by a
manufacturing organizaon on ISO9000 level.
WEEE Symbol Informaon
This symbol on the product, accessories or literature indicates that this prod-
uct and its electronic accessories (e.g., adapter, cables, and Rear Dock) must
not be disposed of with your other household waste. Instead, it is your re-
sponsibility to dispose of these items by handing it over to a designated
collecon point for the recycling of waste electrical and electronic equip-
ment.
For more informaon about where you can drop o your waste
equipment for recycling, please contact your local city oce, your
household waste disposal service or the shop where you purchased
the product.
For Disposal in Countries Outside of the European Union
If you wish to discard this product and its accessories in other area and coun-
tries, please contact your local government for applicable laws and regula-
ons governing the disposal of this product.
III
Chapter 1 Parts of On Lap Product & Accessories
Secon 1 Parts Descripon
1
2
Secon 2 Accessories Descripon
1. Accessories in Package
Standard Accessory
USB-A to Micro USB power & touch cable(1.2m) 1 pcs
HDMI-A to Micro-HDMI video cable(1.2m) 1 pcs
5V,Max.2A Adapter 1 pcs
Protecve Cover Stand 1 pcs
Manual 1 pcs
2. Oponal Accessories
Product Name Descripon
USB-A to Micro USB power &
touch cable(2.1m) 1 pcs
One plug is USB-A(male) for adapter/computer USB
port; the other is Micro USB(male) for On-Lap moni-
tor.
On-Lap Proprietary VGA
video cable (2.1m)
Proprietary cable for On-Lap products.
One plug is D-sub(male) for computer΄s VGA port;
the other plug is Micro-HDMI (male) for On-Lap
monitor.
HDMI-A to Micro-HDMI
Video Cable (2.1m)
One plug is HDMI-A (male) for connecng to com-
puter΄s HDMI-A port ; the other plug is Micro-HDMI
(male) for connecng to On-Lap monitor.
Mini-HDMI to Micro-HDMI
Video Cable (2.1m)
One plug is mini-HDMI (male) for camera΄s mini-
HDMI port ; the other plug is Micro-HDM (male)
connecng to On-Lap monitor.
Micro-HDMI to Micro-HDMI
Video Cable (1.2m)
One plug is Micro-HDMI (male) for camera’s Micro-
HDMI port; the other plug is Micro-HDMI (male) for
connecng to On-Lap monitor.
On-Lap proprietary HDMI-
A&USB-A to dock port cable
(2m)
Proprietary cable for On Lap 1503/1102. One plug is
Gechic proprietary connector for plugging into the
port on Rear Dock; the other two plugs are HDMI-A
(male) and USB-A (male).
Please refer to Chapter 2> Secon 6.
1102 Mul Mount Kit
Proprietary for On-Lap1102. Can be used as a stand
of touch monitor for varies viewing angles; can be
installed on wall mount or arm of VESA 75. Please
refer to Chapter 2.
T1S2 Stand
Proprietary for On-Lap1102/M505/T1 series monitor.
T1S2 supports the monitor for both horizontal and
vercal displays with exible viewing angle adjust-
ment. Please refer to Chapter 2> Secon 3.
Chapter 2 Installaon Instrucons
Secon 1 Installaon of Horizontal Display
Refer to the Fig., ① take
the magnec buckle o
rstly, ②fold and aach
the rubber side of the
magnec buckle on the
mental plate. Adjust the
posion of the magnet
buckle to change the
viewing angles.
The min. viewing angle of horizontal
display is 40 degrees. Do not aach the
magnec buckle higher than the blue line ,
otherwise it may cause the monitor over-
turning.
As the g. below, rotate aside the Cover Locks rstly, and take the monitor out.
Then turn the monitor's backside to the Protecve Cover:①Put the boom
half of the monitor into the Protecve Cover, and ②Put the top half of the
monitor into the Protecve Cover. Rotate down the Cover Locks to prevent the
monitor from sliding out.
①②
As the g. , connect On-Lap 1102 to
a laptop. On-Lap 1102 can be pow-
ered on through two USB ports or a
5V-2A adapter. The video input
source is "HDMI1".
P.S. If the monitor does not get enough power from a single USB port, it
may cause splash screen or display interrupon. Please connect to two
USB ports on your PC or the 5V-2A adapter.
3
It is recommended to install 1102I
touch monitor on VESA75 arm or
wall mount for its Vercal Display.
Secon 2 Store the Monitor in the Protecve Cover
Warning: When not in use, please put the monitor back in the Protec-
ve Cover with its backside outward. Please also rotate down the Cover
Lock to prevent the monitor from sliding out.
Warning: Please keep the " Rear Dock Port" downward in the Protecve
Cover. If the monitor is put upside down in the Protecve Cover, it may
cause the scratches and the Cover Locks cannot be locked on.
Secon 3 Install 1102I Monitor on T1S2 Stand (Oponal)
As shown in the Fig, screw the monitor to the VESA bracket and then screw
the bracket to T1S2 stand.
4
Table des matières
Autres manuels GeChic Comprimé
