GE MINICAM PRO HO98756 Manuel utilisateur
MiniCam™ Pro
User’s Manual
HO98756
www.jascoproducts.com
For technical support contact Jasco Products at 1-800-654-8483
Page 2
Table of Contents
CAUTIONS-------------------------------------------------------3
SYSTEMREQUIREMENTS---------------------------------3
MAINTENANCE CARE AND STORAGE---------------3
CONTENTS------------------------------------------------------5
GETTING TO KNOW YOUR MINICAM™ PRO------5
INSTALLATION-----------------------------------------------6
PHOTOIMPRESSION™-------------------------------------9
VIDEO IMPRESSION™------------------------------------13
MSN® MESSENGER----------------------------------------16
TROUBLE SHOOTING------------------------------------18
TWO YEAR LIMITED WARRANTY-------------------20
FCC STATEMENT-------------------------------------------21
Page 3
Cautions
Read Before Using Your MiniCam™ Pro
1. You must install the camera driver BEFORE connecting the camera
to your computer.
2. Please read this user’s manual before operating your MiniCam™ Pro.
3. Do not leave camera connected to the USB if camera is not going to
be used for a long period of time. This can adversely affect the
picture quality.
System Requirements
1. Operating System
a. Microsoft® Windows® 98 SE
b. Microsoft® Windows® ME
c. Microsoft® Windows® 2000
d. Microsoft® Windows® XP
2. CD drive
3. USB port
Maintenance Care and Storage
Page 4
1. Do not use or store the camera in high humidity and extreme
high/low temperature.
2. Do not touch the lens with your fingers.
3. Do not drop the camera or get the camera wet.
4. Do not try to repair the camera.
5. To clean the camera, use a dry cloth. Do not use organic solvents,
such as alcohol etc. to clean the camera.
6. Store the camera in a dry and clean place
Contents
1. MiniCam™ Pro with stand and clip
2. CD with driver and software application
3. Instruction manual
Getting to Know Your MiniCam™ Pro
Note: You must install the camera driver BEFORE connecting the
camera to your computer.
Page 5
Page 6
Installation
Please note that you must install the camera drivers BEFORE
you connect the camera to the USB port of your computer.
1. You must install all relevant updates, service packs, and patches for
your operating system. These are available on Microsoft’s® website
under “Resources”. Use the “Windows Update” link.
(www.microsoft.com).
2. Insert the included 98756 MiniCam™ Pro CD into the CD Rom
Drive. (The CD should auto load).
3. If CD does not auto load, follow these steps:
a. Double click on My Computer
b. Double click on the CD icon on the CD drive
c. Double click on setup.exe
4. The installation menu will come up. Select MiniCam™ Pro 98756
Driver.
Page 7
5. Select Next on the Welcome screen.
6. Under Setup Type select Complete, and then Next to continue.
7. Select Install to begin copying the driver files to your computer.
8. On the final screen, select Finish.
9. It may be necessary to have your Windows installation disk available
to install any additional windows drivers onto your computer. You
will receive a prompt if this is necessary.
10. (Optional) On the installation menu, select ArcSoft Software Suite.
Follow the on screen instructions to install ArcSoft
VideoImpression™ and/or ArcSoft PhotoImpression™. DirectX®
may install as well. Please follow the instructions to complete the
installation. You may need to reboot your computer.
11. (Optional) Select User’s Manauls to open a PDF version of the
98756 Instruction Manual in both English and Spanish. You will
need Adobe Reader to open the user’s manuals.
Page 8
12. (Optional) To download Adobe® Reader® select Adobe Reader 7.0
and follow the instruction instructions. You may need to reboot your
computer.
13. When you have installed the driver, and all of the optional software
you want to install, select Exit.
14. Remove the warning label from the USB plug of your MiniCam™
Pro.
15. After your computer reboots, plug your MiniCam™ Pro’s USB plug
into the USB plug of your computer.
16. Open ArcSoft VideoImpression™ or ArcSoft PhotoImpresssion™
and follow the instructions below to begin using your MiniCam™
Pro camera. Enjoy!
PhotoImpression™
Welcome to PhotoImpression
ArcSoft PhotoImpression™ is an easy-to-use image-editing program
specifically designed for general consumers. The program enables you to
edit, retouch, enhance or add special effects to digital images with point-
and-click simplicity. It also offers a great variety of project templates for
creating greeting cards and calendars, plus the functionalities of the
popular Arcsoft PhotoPrinter® and Funhouse™ programs.
ArcSoft PhotoImpression™ is an all-inclusive application designed
specifically for novice users. It combines photo editing with additional
creative and printing tools that maximize your digital imaging experience.
Page 9
Page 10
Features include:
• Create dynamic images
• Editable text
• Instantly remove red-eye
• Special effects and enhancements/Intuitive resize options
• Photo fun
• Choose from a wide variety of frames, brush stroke edges and shapes
• Multiple, advanced printing options--now with PIM!
• Desktop interaction
• Works great with digital cameras and scanners
To Open ArcSoft PhotoImpression™
1. Double click on the ArcSoft PhotoImpression™ icon on the desktop.
2. You may also go to ArcSoft under Programs in the Start Menu, and
click on Photo Impression.
Table des matières
Autres manuels GE Webcam
GE
GE HO98067 MiniCam Pro Manuel utilisateur
GE
GE 98068 Manuel utilisateur
GE
GE EasyCam Pro Manuel utilisateur
GE
GE HO98066 Manuel utilisateur
GE
GE EasyCam 98063 Manuel utilisateur
GE
GE 98061 Manuel utilisateur
GE
GE 98046 MiniCam Pro Manuel utilisateur
GE
GE 98090 Manuel utilisateur
GE
GE EasyCam Twin HO98068 Manuel utilisateur
GE
GE EasyCamTM Pro 98064 Manuel utilisateur
