GE Aquant Manuel utilisateur

Measurement & Control

INS5765 Rev. A

June 2013

Aquant®

Protimeter Non-Invasive

Moisture Meter

Instruction Manual

WƌŽƟŵĞƚĞƌ

Aquant

REL

DRY

Protimeter Aquant Page 1

1 Safety Considerations

Calibration of unit - The

accuracy specifications of the

product are valid for one year after

the date of calibration, and the

product requires recalibration after

this period.

Only operate the measuring

instrument properly, for its

intended purpose and within the

parameters specified in the technical

data. Readings from moisture meters

are not definitive but are used to help

a professional make informed

judgment to the material’s moisture

condition. Conductive material such

as salts, carbon and metal can give

false positive readings.

2SearchMode(REL)

The Aquant non-invasive mode gives

readings, in relative terms, of the

moisture condition up to 3/4” beneath

the surface of materials. This mode of

operation is ideal for making rapid

surveys of solid walls and floors and

to pinpoint areas of concern that may

justify a more extensive investigation.

Page 2 Protimeter Aquant

2 Search Mode (REL) (cont.)

The Search mode may also be used as

an alternative to the Measure mode

when it is impractical or undesirable

to push electrode pins into surfaces.

Consider, for example, taking

moisture readings behind ceramic

tiles in shower cubicles or in walls

covered by quality wallpapers where

pinholes would not be acceptable.

Surface moisture (such as

condensation on an otherwise dry

wall) has little effect on Search mode

readings. Conductors (other than

water) within the material may cause

high Search mode readings. Make

sure the flat surface on the back of the

meter is in full contact with the

material to be tested.

It is recommended that users place

the meter onto different areas to

measure and do not slide the meter

across surfaces.

Note: Sliding the meter can cause

premature wear to the back of

the meter.

Protimeter Aquant Page 3

3 Reference Mode

Measure the material until the meter’s

reading is stable, then press for

2 seconds. This will store the reading

until the mode changes of the meter

turns off. Now all reading taken after

will be displayed as normal, but

below you will see a second reading

that shows you if the material is

measured above or below the original

reading. Reference mode can be

useful when trying to establish what

materials are above or below a point

of reference or dry standard. See

page 6 for further information.

Page 4 Protimeter Aquant

4OperatingAquant

Switch On:

Press the ON/OFF button.

The unit turns on, with the LCD

displaying all the segments and

sweeping the LED bar graph.

Protimeter Aquant Page 5

Measurements:

The numeric measurement and color

LED will be shown as well as the

“DRY” (green) or “AT RISK”

(yellow) or “WET” (red), based on

the measurement shown.

7-16.9 DRY (Green)

17-19.9 AT RISK (Yellow)

20-99.9 WET (Red)

Reference Mode of Measurement:

Take the first measurement which

needs to be taken as reference. While

the first reading is displayed on the

screen, press and hold the button

for 2 seconds to enter the Reference

Mode. The display will be similar to

the one shown below.

To return to the normal measurement

mode, press again.

Page 6 Protimeter Aquant

Settings:

Press and hold the button and

switch on the unit by pressing .

Hold both the buttons until the

Aquant displays the version.

Release both buttons while it shows

the version number. The unit enters

Settings Mode.

Protimeter Aquant Page 7

DRY, AT RISK and WET Settings:

The first screen to appear in Settings

is the DRY, AT RISK and WET

setting screen.

This screen sets whether the

indication on the display needs to be

switched ON or OFF. When it is ON,

the moisture condition will be

displayed on the screen. When it is

OFF, no indication is displayed on

screen.

Page 8 Protimeter Aquant

DRY, AT RISK and WET Settings

(cont.):

Use the button to turn ON/OFF

the settings.

If the unit detects no key press for 2

seconds in the Setting screen, it

moves to the next setting.

Pressing the button, after you

have entered the desired setting, will

save the setting and move the screen

to the next setting.

Table des matières

Autres manuels GE Instrument de mesure

GE DM5E Manuel utilisateur

GE StressTel T-MIKE E Manuel utilisateur

GE Druck DPI 620 Genii Manuel utilisateur

GE AB Series Manuel utilisateur

GE CB Watch 3 Manuel utilisateur

GE moisture.IQ Manuel utilisateur

GE Sievers 900 Series Manuel utilisateur

GE Multilin DDFR Manuel utilisateur

GE Optica Manuel utilisateur

GE XL Vu+ VideoProbe Manuel utilisateur

GE Mentor Visual iQ CCF28 Manuel utilisateur

GE Multilin PQM Manuel utilisateur

GE DigitalFlow GC868 Manuel utilisateur

GE DigitalFlow DF868 Manuel du propriétaire

GE TransPort PT900 Manuel utilisateur

GE MAC VU360 Manuel utilisateur

GE AutoSigma 3000 DL Manuel d'utilisation et d'entretien

GE Sievers 500 RL Manuel utilisateur

GE TOP-FREEZER 16 Manuel utilisateur

GE Kelman DGA900 Manuel

GE Protimeter Timbermaster Manuel utilisateur

GE DigitalFlow GS868 Manuel utilisateur

GE N60 Manuel utilisateur

GE TransPort PT878GC Manuel utilisateur

Manuels Instrument de mesure populaires d'autres marques

Suaoki

Suaoki D40 Manuel utilisateur

Elster

Elster BK-G1.6 Manuel utilisateur

Endress+Hauser

Endress+Hauser Deltabar FMD71 Manuel

Duratool

Duratool D03128 Manuel utilisateur

Vega

Vega VEGAPULS 65 Manuel utilisateur

Tonghui

Tonghui TH2618B Manuel utilisateur

Tenmars

Tenmars TM-801 Manuel utilisateur

MSR

MSR 145 Manuel utilisateur

TPS

TPS WP-82 Manuel utilisateur

ELMETRON

ELMETRON CP-511 Manuel utilisateur

PCB Piezotronics

PCB Piezotronics 003C30 Manuel utilisateur

Tenma

Tenma 72-10465 Manuel utilisateur

Endress+Hauser

Endress+Hauser Proline Promag 50 Caractéristiques techniques

Siemens

Siemens SITRANS F Coriolis FCT030 Manuel de la liste des pièces

KLINGER

KLINGER CMF V Series Manuel utilisateur

EXFO

EXFO FTB-2 Manuel d'exploitation et d'entretien

Keysight

Keysight M8290A Manuel utilisateur

ADTEK

ADTEK MW-5 Manuel utilisateur