Cerana ONE Pro UAS | User’s Manual
About Your UAS
Cerana ONE Pro is an industrial grade quadrotor multicopter UA designed for BVLOS
flights in autonomous and manual modes, with redundant onboard 5G cellular connectivity
enabling remote operation for up to 40 minutes.
Cerana ONE Pro is an X4 quadcopter, equipped with the highly advanced flight control
computer (FCC). This FCC allows Cerana ONE Pro to operate fully autonomously,
semi-autonomously or manually depending on operator requirements.
Cerana ONE Pro features a compute module (Garuda CoPilot Computer, or GCC) which
extends the flight management capabilities of the platform, allowing for unlimited
operating range through a centralised operation centre via 5G cellular network technology.
Cerana ONE Pro’s forward and downward facing cameras provide the operator real-time
video streams viewable from anywhere in the world.
Additional forward depth perception is provided to the Detect and Avoid (DAA) subsystem
with a pair of synchronised stereo cameras and a 112° wide Radar to avoid obstacles in
flight.
With a wide variety of interchangeable payloads and high loading capability, Cerana ONE
Pro is a multi-role platform capable of being deployed in service of myriad use-cases.
All Cerana ONE Pro systems are designed, built and tested in-house by Garuda Robotics.
Cerana ONE Pro is designed and made with pride in Singapore.
Features
●Dual batteries for power redundancy
●Dual RTK GNSS setup using high sensitivity, multi-constellation (GPS, GLONASS,
Galileo & BeiDou) receivers
●Forward obstacle avoidance sensors
●Automatic Return-to-Launch (traditional), or Backtrack-to-Launch (pilot directed, or
automatic)
●Failsafe detection and recovery from low battery, RC signal loss, and geofence
breach
●BVLOS ready (when piloted using Plex Horizon GCS in drone operations centre, and
connected via cellular signals)
GARUDA ROBOTICS PAGE 6 / 48
