3
dusty or if using in enclosed spaces.
10. Connect dust exaction equipment. If devices are provided for the connection of dust extraction
and collection facilities, ensure these are connected and properly used, especially in confined areas.
11. Do not abuse the cord. Never carry the tool by its cord or yank it to disconnect it from the
socket. Keep the cord away from heat, oil and sharp edges.
12. Secure your work. Where possible use clamps or a vice to hold the work. It is safer than using
your hand.
13. Do not overreach. Keep proper footing and balance at all times.
14. Maintain tools with care. Keep cutting tools sharp an clean for better and safer performance.
Follow instructions for lubricating and changing accessories. Inspect tool cords periodically and if
damaged have repaired by an authorized service facility. Inspect extension cords periodically and
replace if damaged. Keep handles dry, clean and free from oil and grease.
15. Disconnect tools. Disconnect when not in use, before servicing and when changing
accessories such as blades, bits and cutters.
16. Remove adjusting keys and wrenches. From the habit of checking to see that keys and
adjusting wrenches are removed from the tool and replaced in the storage area before switching on.
17. Avoid unintentional starting. Do not carry a plugged in tool with a finger on the switch. Ensure
the switch if off when plugging in.
18. Use outdoor extension cords. When a tool is used outdoors, use only extension cords
intended for outdoor use and so marked.
19. Stay alert. Watch what you are doing. Use common sense. Do not operate tools when you are
tired.
20. Check damaged parts. Before further use of the tool, a guard or other part that is damaged
should be carefully checked to determine whether it will operate properly and perform its intended
function. Check for alignment of moving parts, free running of moving parts, breakage of parts,
mounting and any other conditions that may affect its operation. A guard or other part that is
damaged should be properly repaired or replaced by an authorized service centre unless otherwise
indicated in this instruction manual. Have defective switches replaced by an authorized service
centre. Do not use the tool if the switch does not turn it on and off.
21. Warning The use of any accessory or attachment, other than recommended in this instruction
manual may present a risk of personal injury.
22. Have your tool repaired by a qualified person This electric tool is in accordance with the
relevant safety requirements. Repairs should only be carried out by qualified persons using original
spare parts, otherwise this may result in considerable danger to the user.
If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or
similarly qualified persons in order to avoid a hazard.
Specific safety instructions:
SPECIFIC RECOMMENDATIONS
- Abrasive grinding wheels should be stored and handled with care in compliance with the
manufacturer’s instructions;
- Examine the grinding wheel before use; do not use chipped, cracked or otherwise deficient
products;
