GARCARE GPCS06 Manuel utilisateur

Corded Pole Saw

GPCS06

Before using electric chain saw for the first time, please read this manual carefully

from every beginning to the end, in order to avoid wrong operation. Preserve it well

and hand it to any subsequent user, by aids of reading of this manual, the users will

be well informed at any time.

Fig. A

Fig. B

Fig. D

Fig. E

Fig. F

Fig. G

Fig. 3

Fig. 4

Fig. 1

Fig. 2

Fig. 5

Fig. 6

Fig. 7

Fig. H

MAX

MIN

Fig. 8

Fig. 9

Fig. I

Fig. 10

Fig.11

Safety instructions

This section covers the basic safety points when work by aids of the electric chain saw.

Symbols in the instructions

Icons on the electric pole saw

In accordance with essential

requirements of the

European directive(s)

Denotes risk of personal injury or

damage to the tool.

To reduce the risk of injury,

user must read instruction

manual.

Wear gloves.

Double insulation :

ClassⅡdevice .This device

must not be earthed.

Wearing of protective shoes

advised.

Electrical hazard, keep at

least 10m distance away

from electrical power lines.

Keep bystanders away

Wear hearing protection.

Never operate the machine in the

rain or in damp or wet condition.

Moisture is a shock hazard.

Wear eye protection.

Remove plug from the mains

before doing any work on the

chainsaw

Wear respiratory protection.

Remove plug from the mains

immediately if the cable is

damaged or cut

Danger signs, information on prevention of people or property damage.

Mandatory signs (the command is described instead of the exclamation

mark) including information to prevent damage.

Note signs with information about better handling of the electric chain

saw.

General power tool safety warnings

WARNING：Read all safety warnings and all instructions. Failure to follow the

warnings and instructions may result in electric shock, fire and/or serious injury.

Save all warnings and instructions for future reference.

The term "power tool" in the warnings refers to your mains-operated (corded) power tool

or battery-operated (cordless) power tool.

1) Work area safety

a) Keep work area clean and well lit. Cluttered or dark areas invite accidents.

b) Do not operate power tools in explosive atmospheres, such as in the presence

of flammable liquids, gases or dust. Power tools create sparks which may ignite the

dust or fumes.

c) Keep children and bystanders away while operating a power tool. Distractions

can cause you to lose control.

2) Electrical safety

a) Power tool plugs must match the outlet. Never modify the plug in any way. Do

not use any adapter plugs with earthed (grounded) power tools. Unmodified plugs

and matching outlets will reduce risk of electric shock.

b) Avoid body contact with earthed or grounded surfaces, such as pipes,

radiators, ranges and refrigerators. There is an increased risk of electric shock if your

body is earthed or grounded.

c) Do not expose power tools to rain or wet conditions. Water entering a power tool

will increase the risk of electric shock.

d) Do not abuse the cord. Never use the cord for carrying, pulling or unplugging

the power tool. Keep cord away from heat, oil, sharp edges or moving parts.

Damaged or entangled cords increase the risk of electric shock.

e) When operating a power tool outdoors, use an extension cord suitable for

outdoor use. Use of a cord suitable for outdoor use reduces the risk of electric shock.

f) If operating a power tool in a damp location is unavoidable, use a residual

current device (RCD) protected supply. Use of an RCD reduces the risk of electric

shock.

3) Personal safety

a) Stay alert, watch what you are doing and use common sense when operating a

power tool. Do not use a power tool while you are tired or under the influence of

drugs, alcohol or medication. Amoment of inattention while operating power tools may

result in serious personal injury.

b) Use personal protective equipment. Always wear eye protection. Protective

equipment such as dust mask, non-skid safety shoes, hard hat, or hearing protection

used for appropriate conditions will reduce personal injuries.

c) Prevent unintentional starting. Ensure the switch is in the off-position before

connecting to power source and/or battery pack, picking up or carrying the tool.

Carrying power tools with your finger on the switch or energising power tools that have

the switch on invites accidents.

d) Remove any adjusting key or wrench before turning the power tool on. A

wrench or a key left attached to a rotating part of the power tool may result in personal

injury.

e) Do not overreach. Keep proper footing and balance at all times. This enables

better control of the power tool in unexpected situations.

f) Dress properly. Do not wear loose clothing or jewelry. Keep your hair, clothing

and gloves away from moving parts. Loose clothes, jewelry or long hair can be caught

in moving parts.

g) If devices are provided for the connection of dust extraction and collection

facilities, ensure these are connected and properly used. Use of dust collection can

reduce dust-related hazards.

4) Power tool use and care

a) Do not force the power tool. Use the correct power tool for your application.

The correct power tool will do the job better and safer at the rate for which it was

designed.

b) Do not use the power tool if the switch does not turn it on and off. Any power

tool that cannot be controlled with the switch is dangerous and must be repaired.

c) Disconnect the plug from the power source and/or the battery pack from the

power tool before making any adjustments, changing accessories, or storing

power tools. Such preventive safety measures reduce the risk of starting the power tool

accidentally.

d) Store idle power tools out of the reach of children and do not allow persons

unfamiliar with the power tool or these instructions to operate the power tool.

Power tools are dangerous in the hands of untrained users.

e) Maintain power tools. Check for misalignment or binding of moving parts,

breakage of parts and any other condition that may affect the power tools

operation. If damaged, have the power tool repaired before use. Many accidents are

caused by poorly maintained power tools.

f) Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp

cutting edges are less likely to bind and are easier to control.

g) Use the power tool, accessories and tool bits etc. in accordance with these

instructions, taking into account the working conditions and the work to be

performed. Use of the power tool for operations different from those intended could

result in a hazardous situation.

5) Service

a) Have your power tool serviced by a qualified repair person using only identical

replacement parts. This will ensure that the safety of the power tool is maintained.

Safety tips for electric pole saw

Keep all parts of the body away from the saw chain when the chain saw is

operating. Before you start the chain saw, make sure the saw chain is not

contacting anything. A moment of inattention while operating chain saws may

cause entanglement of your clothing or body with the saw chain.

Always hold the chain saw with your right hand on the rear handle and your

left hand on the front handle. Holding the chain saw with a reversed hand

configuration increases the risk of personal injury and should never be done.

Hold the power tool by insulated gripping surfaces only, because the cutter

blade may contact hidden wiring or its own cord. Cutter blades contacting a

"live" wire may make exposed metal parts of the power tool "live" and could give the

operator an electric shock.

Wear safety glasses and hearing protection. Further protective equipment for

head, hands, legs and feet is recommended. Adequate protective clothing will

reduce personal injury by flying debris or accidental contact with the saw chain.

Do not operate a chain saw in a tree. Operation of a chain saw while up in a tree

may result in a personal injury.

Always keep proper footing and operate the chain saw only when standing on

fixed, secure and level surface. Slippery or unstable surfaces such as ladders may

cause a loss of balance or control of the chain saw.

When cutting a limb that is under tension be alert for spring back. When the

tension in the wood fibres is released the spring loaded limb may strike the operator

and/or throw the chain saw out of control.

Use extreme caution when cutting brush and saplings. The slender material

may catch the saw chain and be whipped toward you or pull you off balance.

Carry the chain saw by the front handle with the chain saw switched off and

away from your body. When transporting or storing the chain saw always fit

the guide bar cover. Proper handling of the chain saw will reduce the likelihood of

accidental contact with the moving saw chain.

Follow instructions for lubricating, chain tensioning and changing

accessories. Improperly tensioned or lubricated chain may either break or increase

the chance for kickback.

Keep handles dry, clean, and free from oil and grease. Greasy, oily handles are

slippery causing loss of control.

Cut wood only. Do not use chain saw for purposes not intended. For example:

do not use chain saw for cutting plastic, masonry or non-wood building

materials. Use of the chain saw for operations different than intended could result in

a hazardous situation.

Purpose for using of the electric hedge trimmer

The device is intended for infrequent use by homeowners and for such general

applications as clearing, pruning, etc. Any other usage, which do not declared in this

Autres manuels GARCARE Scie à perche

GARCARE

GARCARE GHT06 Manuel utilisateur

Manuels Scie à perche populaires d'autres marques

Poulan Pro

Poulan Pro 545117550 Manuel utilisateur

Husqvarna

Husqvarna 536LiP4 Manuel d'instructions

DeWalt

DeWalt DCPS620 Manuel utilisateur

Remington

Remington RM1035P Manuel utilisateur

Echo

Echo PPT-260 - PARTS CATALOG SERIAL NUMBER... Mode d’emploi

Hawksmoor

Hawksmoor LS C13A Manuel utilisateur

Husqvarna

Husqvarna 327PT5S Manuel utilisateur

Ikra

Ikra IAAS 40-25 Manuel utilisateur

Echo

Echo MTA-PP/E Manuel utilisateur

Spear & Jackson

Spear & Jackson S75EC2 Guide de l'utilisateur

EINHELL

EINHELL 45.016.53 Manuel utilisateur

Gardenline

Gardenline FLX-TBS-1 Manuel utilisateur

Poulan Pro

Poulan Pro PP258TP Manuel utilisateur

Ryobi

Ryobi RY52004A Manuel utilisateur

Bosch

Bosch UniversalChainPole 18 Manuel utilisateur

Makita

Makita DUA301PT2 Manuel utilisateur

AL-KO

AL-KO CSA 2020 Instructions d'utilisation et d'installation

Remington

Remington BRANCH WIZARD DPS-1 Manuel utilisateur