Hawksmoor LS C13A Manuel utilisateur
SKU: 37438
18V Cordless Mini Pruning Chainsaw
Original User’s Instructions
READ BEFORE USE
PLEASE KEEP THESE INSTRUCTIONS FOR FURTHER REFERENCE
2
www.coreservice.co.uk
Hotline: +44 01904 947568
Email [email protected]
CONTENT
∫WHAT’S IN THE BOX ---------------------------------------------------------- 3
∫SPECIFICATIONS -------------------------------------------------------------- 4
∫EXPLANATIONS AND SYMBOLS, CAUTIONS AND WARNINGS ---------- 5
∫IMPORTANT SAFETY WARNINGS -------------------------------------------- 8
∫PRODUCT DESCRIPTION AND IDENTIFICATIONS ------------------------ 24
∫ASSEMBLY AND OPERATING INSTRUCTIONS ----------------------------25
∫CARE AND CLEANING ------------------------------------------------------- 41
∫TROUBLE SHOOTING -------------------------------------------------------- 42
∫DECLARATION OF CONFORMITY / PERFORMANCE -------------------- 43
∫ENVIRONMENTAL INFORMATION ------------------------------------------44
∫GUARANTEE ------------------------------------------------------------------ 45
∫CUSTOMER SUPPORT ------------------------------------------------------- 45
3
www.coreservice.co.uk
Hotline: +44 01904 947568
WHAT'S IN THE BOX
If you do not have all these items, please contact:
www.coreservice.co.uk
Hotline: +44 01904 947568
Email [email protected]
Telescopic pole handle
Hand-held mini
pruning chainsaw
Charger Battery
Oil bottle shoulder strap
4
www.coreservice.co.uk
Hotline: +44 01904 947568
Email [email protected]
SPECIFICATION
Technical Data
Model LS C13A
Mains voltage 18 V d.c.
No load chain speed 3.2 m/s
Cutting length 110 mm
Bar length 127mm
Product length range with telescopic pole 144cm-188cm
Sound pressure level: LpA 67.9 dB(A), K=3
Sound power level: LwA 87.9 dB(A), K=3
-Guaranteed sound power level 91dB(A)
Vibration front handle <2.5 m/s²; K=1.5 m/s²
Net weight approx. 3.28 kg
Battery pack model B0P-SP06-18ZK
Battery capacity 4.0 Ah
Battery charging time Max 100 mins
Charger model B0Q-SP06-20ZB
Battery charger input 220-240V AC, 50/60Hz 65W
Battery charger output 20V d.c. 2.4A
Protection class of battery charger Class II
Note: The above specifications are the MAXIMUM capacities of the tool. The maximum branch
diameter depends on the hardness of the wood and its branches scale. Voltage measured
without workload. Initial battery voltage reaches 20 Volts. Nominal voltage is 18 Volts.
5
www.coreservice.co.uk
Hotline: +44 01904 947568
Email [email protected]
EXPLANATIONS AND SYMBOLS, CAUTIONS AND WARNINGS
Caution / Warning.
Read the instruction manual.
Wear hearing protection!
Wear eye protection!
Wear respiratory protection!
Wear protective gloves!
Wear slip-resistant, sturdy footwear!
Wear mask!
10m
Warning! Danger from overhead electric-power lines! Keep at least 10 m distance.
Switch the product off and disconnect it from the power supply before assembly,
cleaning, adjustments, maintenance, storage and transportation.
Objects thrown by the product could hit the user or other bystanders. Always ensure
that other people and pets remain at a safe distance from the product when it is in
operation. In general, children must not come near the area where the product is.
Minimum distance 15m.
Kickback! Tip contact may cause the guide bar to move suddenly upward and
backwards what may cause serious injury to user.
6
www.coreservice.co.uk
Hotline: +44 01904 947568
Email [email protected]
Contact of the guide bar tip with any object should be avoided.
Always use the product with two hands. Do not use only one hand when operating
the product.
Do not use in rain or wet conditions.
97
Guaranteed sound power level value
Chain oil fill
Correct direction of cutting-teeth
Caution! Risk of injury due to running blades!
Danger of falling objects.
Double insulation. Protection class II
The product complies with the applicable European Directives and an evaluation
method of conformity for these Directives was done.
UK Conformity Assessed
7
www.coreservice.co.uk
Hotline: +44 01904 947568
Email [email protected]
This marking indicates that this product should not be disposed with other household
wastes. To prevent possible harm to the environment or human health from
uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse
of material resources.
Do not throw into water.
Do not throw to fire.
Do not subject the battery to strong sunlight over long periods of time. Do not leave
on a heater (max.45°C).
Batteries contain Li-ion. Do not dispose of waste batteries in domestic waste. Contact
local authority to find out how to dispose of batteries.
WEEE symbol. Waste electrical products should not be disposed of with household
waste. Please recycle where facilities exist. Check with your Local Authority or local
store for recycling advice.
The charger is for indoor use only.
T 3.15A Protective 3.15 A limited
8
www.coreservice.co.uk
Hotline: +44 01904 947568
Email [email protected]
IMPORTANT SAFETY WARNINGS
General Power Tool Safety Warnings
Warning: Please read the following instructions carefully,
failure to do so could lead to serious personal injury.
When using the electric mini pruning chainsaw, basic
safety precautions, including the following, should always
be followed to reduce the risk of fire,electric shock and
personal injury. Read all these instructions before operating
this product and save these instructions.
The term “power tool” in the warnings refers to your mains-
operated (corded) power tool or battery-operated (cordless)
power tool.
Become familiar with the owner’s manual before attempting
to operate this machine.
• This machine is not intended for use by persons (including
children) with reduced physical, sensory or mental capabilities,
or lack of experience and knowledge, unless they have been
given supervision or instruction concerning use of the appliance
by a person responsible for their safety.
• Children should be supervised to ensure that they do not play
with the appliance.
• The machine is only to be used with the power supply unit
provided with the machine.
Important! Read carefully before use, keep for further
reference.
9
www.coreservice.co.uk
Hotline: +44 01904 947568
Email [email protected]
Work Area Safety
• Keep work area clean and well lit. Cluttered or dark areas invite
accidents.
• Do not operate power tools in explosive atmospheres, such as
in the presence of flammable liquids, gases or dust. Power tools
create sparks which may ignite the dust or fumes.
• Keep children and bystanders away while operating a power
tool. Distractions can cause you to lose control.
Electrical Safety
• Power tool plugs must match the outlet. Never modify the plug
in any way. Do not use any adapter plugs with earthed (grounded)
power tools. Unmodified plugs and matching outlets will reduce
risk of electric shock.
• Avoid body contact with earthed or grounded surfaces, such as
pipes, radiators, ranges and refrigerators. There is an increased
risk of electric shock if your body is earthed or grounded.
• Do not expose power tools to rain or wet conditions. Water
entering a power tool will increase the risk of electric shock.
• Do not abuse the cord. Never use the cord for carrying, pulling
or unplugging the power tool. Keep cord away from heat, oil,
sharp edges or moving parts. Damaged or entangled cords
increase the risk of electric shock.
• When operating a power tool outdoors, use an extension cord
suitable for outdoor use. Use of a cord suitable for outdoor use
reduces the risk of electric shock.
• If operating a power tool in a damp location is unavoidable, use
a residual current device (RCD) protected supply. Use of an
RCD reduces the risk of electric shock.
10
www.coreservice.co.uk
Hotline: +44 01904 947568
Email [email protected]
Personal Safety
• Stay alert, watch what you are doing and use common sense
when operating a power tool. Do not use a power tool while you
are tired or under the influence of drugs, alcohol or medication.
A moment of inattention while operating power tools may result
in serious personal injury.
• Use personal protective equipment. Always wear eye protection.
Protective equipment such as dust mask, non-skid safety shoes,
hard hat, or hearing protection used for appropriate conditions
will reduce personal injuries.
• Prevent unintentional starting. Ensure the switch is in the off-
position before connecting to power source and/or battery pack,
picking up or carrying the tool. Carrying power tools with your
finger on the switch or energizing power tools that have the
switch on invites accidents.
• Remove any adjusting key or wrench before turning the power
tool on. A wrench or a key left attached to a rotating part of the
power tool may result in personal injury.
• Do not overreach. Keep proper footing and balance at all times.
This enables better control of the power tool in unexpected
situations.
• Dress properly. Do not wear loose clothing or jewelry. Keep
your hair and clothing away from moving parts. Loose clothes,
jewelry or long hair can be caught in moving parts.
• If devices are provided for the connection of dust extraction and
collection facilities, ensure these are connected and properly
used. Use of dust collection can reduce dust-related hazards.
• Do not let familiarity gained from frequent use of tools allow
you to become complacent and ignore tool safety principles.
A careless action can cause severe injury within a fraction of a
second.
Ce manuel convient aux modèles suivants
1
Table des matières
Autres manuels Hawksmoor Scie à perche
