G&G Hopscotch Manuel utilisateur
Imported in North America by :
Peter John M. Distributions inc.
#114 - 6951 - 72nd street
Delta, BC, Canada V4G 0A2
1-888-597-0992
Hopscotch
Thank you for purchasing the guzzie+Guss Hopscotch stroller.
Given all products out there, choosing the right stroller to fit your
needs can be a challenge and we are honored that you have
decided to go with guzzie+Guss. We are committed to producing
quality products that offer clever solutions, and are easy to use, so
that you can focus on having fun! Please do feel free to reach out
to us with any questions, comments, or if you need assistance with
your guzzie+Guss stroller.
It is important that you read and follow the instructions in this
manual. Please ensure that all parts are properly attached and
moving parts are in working order. Please pay special attention
to the system of opening and closing the stroller.
Read all warnings and safety precautions before using.
Having read and followed all instructions in this manual, please
keep it in a safe place to review if necessary. If you have a
problem with the assembly of the stroller or use, please contact
A member of our team will be very happy to help you. You will be
asked to provide us the serial number and date of manufacture;
this information can be found on the frame of your stroller.
Please note the following to
ensure safe use of your stroller
• Read these instructions before using this product.
• Failure to follow all warnings and instructions could result in serious injury
or death.
• Do not use this stroller if there are any broken or missing parts.
• To ensure proper use, store this user guide in a convenient place so it can
be consulted.
• Never leave child in the stroller unattended.
• Care must be taken when folding and unfolding the product to prevent
finger entrapment.
• To avoid entrapment or pinching, do not fold or unfold stroller when child is
in or within reach of the stroller.
• To avoid serious injury from falling or sliding out, always use harness to
secure your child.
• Child may slip into leg openings and strangle. Never use in reclined carriage
position(s) unless using the safety harness and the footrest enclosure.
• When using the stroller seat from birth to 4 months always use the footrest
enclosure or an infant car seat properly attached to the stroller.
• Do not exceed the infant car seat manufacturer’s maximum weight limit
when using an infant car seat with the stroller.
• Do not use stroller with a child who weighs more than 50 lbs (22.5 kg).
• Do not use stroller with a child taller than 40 inches (101 cm).
• Do not overload basket – Maximum weight in basket is 10 lbs (4.5kg).
• Do not overload the stroller, it may become unstable Max load is 60 lbs
(27 kgs)
• Overloading the basket may cause the stroller to become unstable.
• Always make certain that the stroller is fully open and locked in the open
position before use.
• Do not hang or place items such as bags on the stroller handle or frame
(except for those approved by guzzie+Guss). They may cause the stroller to
become unstable.
• The stroller will become unstable if a parcel bag or parcel rack is being
used when there is no provision for one.
• Do not allow children to climb on or play with the stroller.
• Never use stroller on stairs or escalators.
• This stroller is intended for walking speed only. Do not use while jogging,
skating, etc.
• Always set the brake when stroller is not moving.
• Only use accessories and replacement parts approved by guzzie+Guss.
TABLE OF CONTENTS
Assembling your stroller
What is in the box
Opening the frame
Attaching front wheels
Attaching rear wheels
Attaching the bumper bar
Attaching the canopy
5
Using your stroller
6
7
8
10
9
11 - 12
13
14
14
17
Seat
Canopy extension
Handle
Footrest enclosure
Footrest
Harness
Swivel wheels
Brake
Folding the stroller
Using your stroller
for newborns
19
20
3
21
Car seat adapters
Warnings
Cleaning and
maintenance
Additional information
Warranty
18
22
Seat Ventilation
13
15 - 16
17
Handle button
Swivel lock
Footrest adjustment
button
Canopy extension
zipper
Recline lever
Parking brake
WHAT IS IN THE BOX
Stroller chassis
+ Seat unit
Canopy
Bumper bar
Rear wheels (2)Front wheels (2)
Car seat adapters*
*Please contact us for an up to date list of compatible car seats.
CONTROL BUTTONS
ASSEMBLY ASSEMBLY
Attaching the front wheels
Insert the swivel pin into the front wheel housing on the stroller
chassis. The wheel will click when it is properly inserted.
Removing the front wheels
To remove the front wheels press the button above the swivel lock,
and slide the wheel out while holding it down
Front wheels
CLICK
Opening Chassis
Squeeze the handle button and rotate the handle away from the chassis,
until it clicks in place. (pic 1)
Lift the handle up.(pic 2) (pic 3)
Keep lifting the handle up as the chassis unfolds, until the handle clicks into
its fully open position. Listen for the click. (pic 4)
Raise the seat backrest, and continue rotating the seat backrest until the
seat is fully secured and locked into place, listen for the click.
(pic 5) (pic 6) (pic 7)
CLICK
CLICK
Bumper bar
9
ASSEMBLY ASSEMBLY
Removing the bumper bar
To remove the bar, find the release button on the underside of the
receptacles, push in and pull the bar out.
Note: You can remove one side and swing the bar away for better access
to your child.
Attaching the bumper bar
Line the bumper bar up with the receptacles on either side of the stroller
seat, and push both sides into them. Each side will click into place when
properly attached. To confirm the bar is properly attached try pulling the bar
away from the seat.
Attaching the rear wheels
Insert the axle into the rear wheel housing on the chassis. The wheel will click
when properly inserted. Repeat on the other side.
Removing the rear wheels
To remove the rear wheels, press the button underneath the brake, slide the
wheel out while pressing the button.
CLICK
Rear wheels
10 11
USING YOUR STROLLERASSEMBLY
Seat
Removing the set
To remove the seat from the stroller chassis, lift the release lever at the top of
the seat, then push the seat forward until the backrest is past 90 degrees. Lift
the seat off the chassis.
Attaching the seat
To attach the seat, line up the seat grooves above the chassis slots (both
sides of the seat) and lower the seat down onto the chassis.
Note: The stroller seat will fit in either the forward or reversed direction.
Canopy
On both sides of the seat you will find a rectangular, grooved mount. Slide
the canopy ratchet onto one of these side mounts (from the top to the
bottom). Make sure to push enough to get the ratchet to be placed fully on
the mount. (You will feel a positive click, when this has been completed)
Repeat on the other side. (pic1) (pic2)
Feed the recline lever through the hole in the back of the canopy. (pic3)
On the back lip of the canopy you will find 6 snaps that correspond to 6
snaps on the seat. These need to be attached. (pic4) (pic5)
Removing the Canopy (pic7)
Pull the tab. (A)
Lift the ratchet off the mount. (B)
Unsnap the buttons. (C)
Attaching the Canopy:
On both sides of the stroller seat you will find a snap that corresponds to
a snap on the canopy, these need to be attached(pic6)
A
B
C
12 13
USING YOUR STROLLERUSING YOUR STROLLER
Canopy Extension
Open the zippered pleat to extend the canopy and open side ventilation.
Ventilation
On the back of the seat there is a zippered panel that can be unzipped
to allow for more airflow. You can store the flap in the pouch at the
bottom.
Seat
Reclining the seat
At the top of the seat back, you will find the release lever; lift the
lever to adjust the seat angle to the desired position.
Position 1 Position 2 Position 3
14 15
USING YOUR STROLLER
USING YOUR STROLLER
Then bring the 2 sides together and the magnets will join them together. Once
they are together then bring this buckle towards the crotch strap buckle. It will
automatically connect together.
Harness
The Stroller is equipped with a magnetic 5-point harness. To use the harness,
slide the waist strap buckle into the shoulder harness buckle, repeat on the
other side.
To undo the buckle, squeeze the 2 grey buttons on in the center of the
harness, and pull the buckle apart.
Footrest
To adjust the footrest position, push in the release buttons on both sides, and
raise or lower the footrest to the desired position.
Adjusting the Handle position
The handle angle can be adjusted to several positions by squeezing the
handle button, and rotating the handle up or down. There are 3 positions to
choose from.
16 17
USING YOUR STROLLERUSING YOUR STROLLER
To release the brakes, press forward on the upper portion of the brake
lever. (pic2)
To set the parking brake, push down on the lower portion of the
brake lever. (pic1)
To set your front wheels to not swivel (locked position), slide the swivel
lock to the middle of the frame. To release the lock, slide the swivel lock
back to straight.
Swivel wheels
Note; pull back on the stroller after you have released the brake to
ensure that the brake has fully disengaged.
Brakes
Harness
The length of the shoulder straps can also be changed by sliding the
buckle on each shoulder strap. (pic2)
To adjust the height of the shoulder strap, slide the strap through the
harness loops and thread back to the desired height.
The waist belts are adjustable on either the right or left by using the
adjustment buckles on the waist strap. (pic1)
Table des matières
