G-Force CORSAIR 180 Manuel utilisateur
CORSAI
R
18
0
MANUAL V1.1 12/05/13
CORSAIR 180
MANUAL
2
IMPORTANT NOTICES 03
ASSEMBLING OF THE PARAMOTOR 05
HARNESS AND DISTANCE BARS 07
ASSEMBLING OF THE PROPELLER 10
ASSEMBLY INSPECTION 11
TECHNICAL DATA OF THE ENGINE 12
CARBURETOR – FUEL AND OIL 14
IGNITION AND ELECTRIC 15
JOYSTICK 17
PRE-FLIGHT CHECK 18
SPARE PARTS LIST 19
DIAGNOSING AND STARTING A FLOODED ENGINE 26
REGULAR CHECKS AND MAINTENANCE 28
TERMS OF GUARANTEE 29
WARRANTY ZERTIFICATE 30
CORSAIR 180
MANUAL
3
IMPORTANT NOTICES
* * C O N G R A T U L A T I O N S * *
Thank you for choosing an excellent paramotor. Please take the time to read this
manual carefully, with this manual we will try to give advice on the maintenance and
operation that will help you have a reliable paramotor and to preserve your
investment.
Furthermore, we invite you to give this manual with the paramotor if you sell it, so it
can be useful for the next owner as well. The manufacturer and the resellers are
ready to answer your questions and, if necessary, to solve problems, because the
safety of yourself and the others is the most important thing for us. When you will
receive the motor, it will already have overcome a test of 1 hour in the factory,
verifying the operation of all the components and the operation to every speed. All
the paramotors are tested before the delivery. We reserve the right to change
specifications, components, details of the motor, in relationship to the model in
production without incurring in some obligation. The reliability, the performances and
the duration of your paramotor will also depend on your understanding of the correct
maintenance and operation of the engine. This manual describes the paramotor, its
installation, use and control.
This PPG is not covered by product liability insurance. Do not start it or fly it
unless you are willing to assume all risks inherent in the sport of Powered
Paragliding and all responsibility for any property damage, injury or death
which may result from the use of this product.
CORSAIR 180
MANUAL
4
You must be aware that any engine can fail and breakdown at any moment,
this could lead a landing in less than ideal areas with the possibility of injury to
the pilot or other people. Any powered paramotor must only fly in permitted
areas, and never to fly low above a crowd of people. Inhabited zones, water,
and areas that are difficult to land should be avoided, always remember that
the engine could stop.
Some atmospheric conditions can cause the engine to perform differently than
normal. Before beginning every flight, you must test the paramotor on the
ground. Start the engine on a flat surface that is free from stones, sand or
small parts that could be sucked in by the propeller. Be sure any persons
nearby are well clear off the thrust from the propeller and not near the
propeller at any time the motor is running. A good safety distance is 50 meters
for all directions of projection of the propeller and 20 meters for the others
directions.
Do not use a paramotor that has not been correctly maintained or not been
used for some time, or if you know that is not in good condition. The use of
not original spare parts can make the paramotor dangerous and immediately
voids the warranty. Changes to the reduction or propellers can reduce safety
and reliability of the aircraft. Before every use or test, check the condition of
the propeller and the torque of bolts of the propeller. If the propeller is
damaged do not use it, this can lead to a breakup of the propeller in rotation
or to strong vibrations that will transmit to the motor and may cause damage
or loosen bolts or components.
Never use the motor without propeller or without reduction drive.
CORSAIR 180
MANUAL
5
FRAME
The frame consists of:
-a.) central module
-b.) cage
-c.) 2x long supports
-d.) 4x middle supports
Top position: long supports
Middle position: middle supports
Bottom position: middle supports
Assemble the complete cage and
close all velcro straps
ASSEMBLING OF THE PARAMOTOR
CORSAIR 180
MANUAL
6
Insert assembled cage first in top position
after that insert middle and bottom position.
Close bottom velcro straps on both sides.
Close netting with carabineer on both sides.
CORSAIR 180
MANUAL
7
Harness has to be connected with the special
buckles.
Connect harness with both buckles to the frame.
ASSEMBLING OF THE HARNESS AND THE DISTANCE BARS
CORSAIR 180
MANUAL
8
Fix the distance bars with the nut.
Distance bars are moveable vertically and
horizontally.
Fix the shoulder strap correctly to the harness.
CORSAIR 180
MANUAL
9
ADJUSTING OF THE HARNESS
The best way to familiarize yourself with the harness and your personal flying
position is to use a simulator.
Sit in the harness and adjust the shoulder straps correctly. The weight should be
constantly shared on the shoulders. Find your seat position and adjust the straps
accordingly to sit relaxed.
The shoulder straps are adjusted depending on pilot weight. The flight position is
optimal when the propeller shaft line is 5 ° to a maximum of 10 ° below the horizontal
line.
horizontal line
propeller shaft line
CORSAIR 180
MANUAL
10
On the CORSAIR 180 paramotor is mounted a HELIX carbon propeller
Mount the propeller with the six M8 screw with a torque of 10Nm.
Please use only original propellers otherwise you lose your warranty.
ASSEMBLING OF THE PROPELLER
Table des matières
Autres manuels G-Force Paramoteur
Manuels Paramoteur populaires d'autres marques
Sky Country
Sky Country RESCUE SC-25 Manuel utilisateur
FLY
FLY TRIKE-FLASH Manuel utilisateur
Parajet
Parajet Volution Micro Manuel utilisateur
Cruise Carbon
Cruise Carbon INSTINCT Guide rapide
Fly Products
Fly Products FLASH 100 Manuel utilisateur
Opale-Paramodels
Opale-Paramodels Backpack XXS3 Manuel utilisateur
