FXA R6212A Manuel utilisateur
501923638
pg 1 -13
pg 14-24
pg 25-37
pg 38-48
pg 49-61
pg 62-72
pg 73-85
pg 86-97
pg 98-110
Instruction manual (Original instructions)
Käyttöohje (Alkuperäisten ohjeiden käännös)
Bruksanvisning (Översättning av originalinstruktionerna)
Bruksanvisning (Oversettelse av de opprinnelige instruksjonene)
Kasutusjuhend (Tolgitud originaal juhendist)
Instaliavimo instrukcijos (Vertimas originali instrukcija)
GB
FI
SE
NO
RU
EE
LV
LT
PL
1
Hand Mixer
Model: 501923638/R6212A
2017
2
SAFETY
GENERAL SAFETY INSTRUCTIONS
WARNING! Read all safety warnings and all instructions. Failure
to follow the warnings and instructions may result in electric shock,
fire and/or serious injury. Save all warnings and instructions for future
reference. The term “power tool”in the warnings refers to your
mainsoperated (corded) power tool or battery-operated (cordless)
power tool.
1. WORK AREA SAFETY
> Keep work area clean and well lit. Cluttered or dark areas invite
accidents.
> Do not operate power tools in explosive atmospheres, such as in the
presence of flammable liquids, gases or dust. Power tools create
sparks which may ignite the dust or fumes.
> Keep children and bystanders away while operating a power tool.
Distractions can cause you to lose control.
2. ELECTRICAL SAFETY
> Power tool plugs must match the outlet. Never modify the plug in
any way. Do not use any adapter plugs with earthed (grounded)
power tools.Unmodified plugs and matching outlets will reduce risk
of electric shock.
> Avoid body contact with earthed or grounded surfaces such as pipes,
radiators, ranges and refrigerators. There is an increased risk of
electric shock if your body is earthed or grounded.
> Do not expose power tools to rain or wet conditions. Water
entering a power tool will increase the risk of electric shock.
> Do not abuse the cord. Never use the cord for carrying, pulling or
unplugging the power tool. Keep cord away from heat, oil, sharp
edges or moving parts. Damaged or entangled cords increase the
risk of electric shock.
> When operating a power tool outdoors, use an extension cord
3
suitable for outdoor use. Use of a cord suitable for outdoor use
reduces the risk of electric shock.
> If operating a power tool in a damp location is unavoidable, use an
earth leakage circuit breaker. Use of an earth leakage circuit breaker
reduces the risk of electric shock.
3. PERSONAL SAFETY
> Stay alert, watch what you are doing and use common sense
when operating a power tool. Do not use a power tool while you
are tired or under the influence of drugs, alcohol or medication. A
moment of inattention while operating power tools may result in
serious personal injury.
> Use personal protective equipment. Always wear eye
protection. Protective equipment such as dust mask, non-skid
safety shoes, hard hat, or hearing protection used for
appropriate conditions will reduce personal injuries.
> Prevent unintentional starting. Ensure the switch is in the off-
position before connecting to power source and/or battery pack,
picking up or carrying the tool. Carrying power tools with your finger
on the switch or energising power tools that have the switch on
invites accidents.
> Remove any adjusting key or wrench before turning the power tool
on. A wrench or a key left attached to a rotating part of the power
tool may result in personal injury.
> Do not overreach. Keep proper footing and balance at all times.
This enables better control of the power tool in unexpected
situations.
> Dress properly. Do not wear loose clothing or jewelry. Keep your
hair, clothing and gloves away from moving parts. Loose clothes,
jewelry or long hair can be caught in moving parts.
> If devices are provided for the connection of dust extraction and
collection facilities, ensure these are connected and properly
used. Use of dust collection can reduce dust-related hazards.
4
4. POWER TOOL USE AND CARE
> Do not force the power tool. Use the correct power tool for your
application. The correct power tool will do the job better and safer
at the rate for which it was designed.
> Do not use the power tool if the switch does not turn it on and off.
Any power tool that cannot be controlled with the switch is
dangerous and must be repaired.
> Disconnect the plug from the power source and/or the battery pack
from the power tool before making any adjustments, changing
accessories, or storing power tools. Such preventive safety
measures reduce the risk of starting the power tool accidentally.
> Store idle power tools out of the reach of children and do not
allow persons unfamiliar with the power tool or these
instructions to operate the power tool. Power tools are
dangerous in the hands of untrained users.
> Maintain power tools. Check for misalignment or binding of moving
parts, breakage of parts and any other condition that may affect the
power tool's operation. If damaged, have the power tool repaired
before use. Many accidents are caused by poorly maintained
power tools.
> Keep cutting tools sharp and clean. Properly maintained cutting
tools with sharp cutting edges are less likely to bind and are easier
to control.
> Use the power tool, accessories and tool bits etc., in
accordance with these instructions, taking into account the
working conditions and the work to be performed. Use of the
power tool for operations different from those intended could
result in a hazardous situation.
5
5. SERVICE
> Have your power tool serviced by a qualified repair person using
only identical replacement parts. This will ensure that the safety of
the power tool is maintained.
SAFETY INSTRUCTIONS FOR MIXERS
Always check that the supply voltage is the same as the voltage
indicated on the nameplate of the tool
Never use the tool in or near an explosive atmosphere
Never mix combustible substances
Never reach with your hand or any other object into the mixing
container during mixing
Wear protective gloves, a dust mask, close-fitting clothes and
sturdy shoes
The noise level when working can exceed 85 dB(A); wear ear
protection
Always disconnect plug from power source before making any
adjustment or changing any accessory
6
Symbols
On the product, the rating label and within these instructions you will find
among others the following symbols and abbreviations. Familiarize yourself
with them to reduce hazards like personal injuries and damage to property.
Indicates that the product meets the safety standards of the European
EC- directives.
This appliance is classified as protection class II and must not be
connected to a protective ground.
Danger! Indicate risk of personal injury or severe material damage
Read and understand the instruction manual before use
Plug out before maintain or adjustment
Wear a dust
mask.
Wear hearing protection
Wear safety gloves
Wear safety goggles We ar safety boots
Dispose the packing material in an environmentally-friendly way.
Indicates Waste Electrical- and Electronic Equipment that should not be
discarded with household waste.
7
1
A Switch for on/off and speed control B Button for switch locking
C Speed selection wheel D Spindle
E Mixing paddle F Ventilation slots
G Wrench (2) H Shift Knob
2
8
○
3
○
4
10
5
TECHNICAL SPECIFICATIONS
Model Number
R6212A
R6211B
R6211C
Voltage
220-240V~,50Hz
Power
1220W
1400w
1600
No-load Speed
0-480/0-800 min-1
Mixing paddle Dia. Ø max
120 mm
140 mm
160 mm
Coupling thread
M 14 ×2
Protection class
II
Ce manuel convient aux modèles suivants
1
Table des matières
Langues :
Autres manuels FXA Batteur à main
